KVM: PPC: Book3S HV: Do SLB load/unload with guest LPCR value loaded
"Linux Kernel Mailing List" <[email protected]> Sat, 10 Feb 2018 22:00:25 +0000 (UTC)
| Newsgroups | gmane.linux.kernel.commits.head |
|---|---|
| Message-ID | <[email protected]> |
Web: https://git.kernel.org/torvalds/c/6964e6a4e4894c707e42d51d9d30683c57f43201 Commit: 6964e6a4e4894c707e42d51d9d30683c57f43201 Parent: 43ff3f65234061e08d234bdef5a9aadc19832b74 Refname: refs/heads/master Author: Paul Mackerras <[email protected]> AuthorDate: Thu Jan 11 14:51:02 2018 +1100 Committer: Paul Mackerras <[email protected]> CommitDate: Wed Jan 17 11:19:02 2018 +1100 KVM: PPC: Book3S HV: Do SLB load/unload with guest LPCR value loaded This moves the code that loads and unloads the guest SLB values so that it is done while the guest LPCR value is loaded in the LPCR register. The reason for doing this is that on POWER9, the behaviour of the slbmte instruction depends on the LPCR[UPRT] bit. If UPRT is 1, as it is for a radix host (or guest), the SLB index is truncated to 2 bits. This means that for a HPT guest on a radix host, the SLB was not being loaded correctly, causing the guest to crash. The SLB is now loaded much later in the guest entry path, after the LPCR is loaded, which for a secondary thread is after it sees that the primary thread has switched the MMU to the guest. The loop that waits for the primary thread has a branch out to the exit code that is taken if it sees that other threads have commenced exiting the guest. Since we have now not loaded the SLB at this point, we make this path branch to a new label 'guest_bypass' and we move the SLB unload code to before this label. Signed-off-by: Paul Mackerras <[email protected]> --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 109 ++++++++++++++++---------------- 1 file changed, 55 insertions(+), 54 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 76332a3f6c0d..30ece4cebaf5 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -617,13 +617,6 @@ kvmppc_hv_entry: lbz r0, KVM_RADIX(r9) cmpwi cr7, r0, 0 - /* Clear out SLB if hash */ - bne cr7, 2f - li r6,0 - slbmte r6,r6 - slbia - ptesync -2: /* * POWER7/POWER8 host -> guest partition switch code. * We don't have to lock against concurrent tlbies, @@ -738,19 +731,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) 10: cmpdi r4, 0 beq kvmppc_primary_no_guest kvmppc_got_guest: - - /* Load up guest SLB entries (N.B. slb_max will be 0 for radix) */ - lwz r5,VCPU_SLB_MAX(r4) - cmpwi r5,0 - beq 9f - mtctr r5 - addi r6,r4,VCPU_SLB -1: ld r8,VCPU_SLB_E(r6) - ld r9,VCPU_SLB_V(r6) - slbmte r9,r8 - addi r6,r6,VCPU_SLB_SIZE - bdnz 1b -9: /* Increment yield count if they have a VPA */ ld r3, VCPU_VPA(r4) cmpdi r3, 0 @@ -1017,6 +997,29 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) cmpdi r3, 512 /* 1 microsecond */ blt hdec_soon + /* For hash guest, clear out and reload the SLB */ + ld r6, VCPU_KVM(r4) + lbz r0, KVM_RADIX(r6) + cmpwi r0, 0 + bne 9f + li r6, 0 + slbmte r6, r6 + slbia + ptesync + + /* Load up guest SLB entries (N.B. slb_max will be 0 for radix) */ + lwz r5,VCPU_SLB_MAX(r4) + cmpwi r5,0 + beq 9f + mtctr r5 + addi r6,r4,VCPU_SLB +1: ld r8,VCPU_SLB_E(r6) + ld r9,VCPU_SLB_V(r6) + slbmte r9,r8 + addi r6,r6,VCPU_SLB_SIZE + bdnz 1b +9: + #ifdef CONFIG_KVM_XICS /* We are entering the guest on that thread, push VCPU to XIVE */ ld r10, HSTATE_XIVE_TIMA_PHYS(r13) @@ -1193,7 +1196,7 @@ hdec_soon: addi r3, r4, VCPU_TB_RMEXIT bl kvmhv_accumulate_time #endif - b guest_exit_cont + b guest_bypass /****************************************************************************** * * @@ -1481,34 +1484,12 @@ mc_cont: 1: #endif /* CONFIG_KVM_XICS */ - mr r3, r12 - /* Increment exit count, poke other threads to exit */ - bl kvmhv_commence_exit - nop - ld r9, HSTATE_KVM_VCPU(r13) - lwz r12, VCPU_TRAP(r9) - - /* Stop others sending VCPU interrupts to this physical CPU */ - li r0, -1 - stw r0, VCPU_CPU(r9) - stw r0, VCPU_THREAD_CPU(r9) - - /* Save guest CTRL register, set runlatch to 1 */ - mfspr r6,SPRN_CTRLF - stw r6,VCPU_CTRL(r9) - andi. r0,r6,1 - bne 4f - ori r6,r6,1 - mtspr SPRN_CTRLT,r6 -4: - /* Check if we are running hash or radix and store it in cr2 */ + /* For hash guest, read the guest SLB and save it away */ ld r5, VCPU_KVM(r9) lbz r0, KVM_RADIX(r5) - cmpwi cr2,r0,0 - - /* Read the guest SLB and save it away */ li r5, 0 - bne cr2, 3f /* for radix, save 0 entries */ + cmpwi r0, 0 + bne 3f /* for radix, save 0 entries */ lwz r0,VCPU_SLB_NR(r9) /* number of entries in SLB */ mtctr r0 li r6,0 @@ -1524,8 +1505,34 @@ mc_cont: addi r5,r5,1 2: addi r6,r6,1 bdnz 1b + /* Finally clear out the SLB */ + li r0,0 + slbmte r0,r0 + slbia + ptesync 3: stw r5,VCPU_SLB_MAX(r9) +guest_bypass: + mr r3, r12 + /* Increment exit count, poke other threads to exit */ + bl kvmhv_commence_exit + nop + ld r9, HSTATE_KVM_VCPU(r13) + lwz r12, VCPU_TRAP(r9) + + /* Stop others sending VCPU interrupts to this physical CPU */ + li r0, -1 + stw r0, VCPU_CPU(r9) + stw r0, VCPU_THREAD_CPU(r9) + + /* Save guest CTRL register, set runlatch to 1 */ + mfspr r6,SPRN_CTRLF + stw r6,VCPU_CTRL(r9) + andi. r0,r6,1 + bne 4f + ori r6,r6,1 + mtspr SPRN_CTRLT,r6 +4: /* * Save the guest PURR/SPURR */ @@ -1803,7 +1810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) ld r5, VCPU_KVM(r9) lbz r0, KVM_RADIX(r5) cmpwi cr2, r0, 0 - beq cr2, 3f + beq cr2, 4f /* Radix: Handle the case where the guest used an illegal PID */ LOAD_REG_ADDR(r4, mmu_base_pid) @@ -1839,15 +1846,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) BEGIN_FTR_SECTION PPC_INVALIDATE_ERAT END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1) - b 4f +4: #endif /* CONFIG_PPC_RADIX_MMU */ - /* Hash: clear out SLB */ -3: li r5,0 - slbmte r5,r5 - slbia - ptesync -4: /* * POWER7/POWER8 guest -> host partition switch code. * We don't have to lock against tlbies but we do -- To unsubscribe from this list: send the line "unsubscribe git-commits-head" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html