Re: veritysetup forward error correction failure

On 17/07/2019 19:06, Tom Eccles wrote:
> Hello,
> 
> I have a question about veritysetup using forward error correction.
> 
> I created my dm-verity volume using
> 
> veritysetup --check-at-most-once --fec-device /dev/vdc --fec-roots 24 format
> /dev/vdb1 /dev/vdd
> 
> Then I introduce a single bit error into /dev/vdb1.
> 
> If I then open the dm-verity device using
> 
> veritysetup --fec-device /dev/vdc --fec-roots 24 open /dev/vdb1 vroot
> /dev/vdd <hash>
> 
> When I mount the device and inspect the corrupted file, the single bit error
> cannot be corrected:
> [  108.994804] device-mapper: verity-fec: 254:17: FEC 19300352: failed to
> correct: -74
> [  108.994834] device-mapper: verity: 254:17: data block 273411 is corrupted
> 
> However, if I verify the whole device using veritysetup it succeeds:
> 
> veritysetup --fec-device /dev/vdc --fec-roots 24 verify /dev/vdb1 /dev/vdd
> <hash>
> Verification failed at position 1119891456.
> Verification of data area failed.
> Found 1 repairable errors with FEC device
> 
> So I suspect that I have the wrong flags to veritysetup open. Can anybody
> see where I am going wrong?

Well, the FEC code in userspace and kernel differs, it is quite possible
that there could be some misconfiguration or a bug.

Please be sure you are testing access to the image and not
some cached data in meory - better flush all caches between runs with the command
"echo 3 > /proc/sys/vm/drop_caches".

If you can still reproduce it, please send version of the utility and
kernel (and --debug output as suggested in another mail) and if you have some
data/hash/fec images that can be used to reproduce it, let me know where I can find it.

Thanks,
Milan
_______________________________________________
dm-crypt mailing list
[email protected]
https://www.saout.de/mailman/listinfo/dm-crypt