Re: Encrypting DVD or CDROM from iso

Hi to all and excuse me for delay but lately the life seems to me more 
complicated :-D

Coming to us, I've repeat all procedure using Cryptsetup 2.3.3, with the 
same tutorial -> "http://www.sourcentral.org/luks/iso9660/" and the 
results seems the same, as you can see:

> cryptsetup --debug -r luksOpen image.iso volume1
> # cryptsetup 2.3.3 processing "cryptsetup --debug -r luksOpen image.iso 
> volume1"
> # Running command open.
> # Locking memory.
> # Installing SIGINT/SIGTERM handler.
> # Unblocking interruption on signal.
> # Allocating context for crypt device image.iso.
> # Trying to open and read device image.iso with direct-io.
> # Trying to open device image.iso without direct-io.
> # Initialising device-mapper backend library.
> # Trying to load any crypt type from device image.iso.
> # Crypto backend (OpenSSL 1.1.1f  31 Mar 2020) initialized in 
> cryptsetup library version 2.3.3.
> # Detected kernel Linux 5.8.0-25-generic x86_64.
> # Loading LUKS2 header (repair disabled).
> # Acquiring read lock for device image.iso.
> # Verifying lock handle for image.iso.
> # Device image.iso READ lock taken.
> # Trying to read primary LUKS2 header at offset 0x0.
> # Opening locked device image.iso
> # Veryfing locked device handle (regular file)
> # LUKS2 header version 2 of size 16384 bytes, checksum sha256.
> # 
> Checksum:47874913fa24493aa71dc39d3ff41d1dc1f36719eea32c2fb1b6a1aef1a09ac9 
> (on-disk)
> # 
> Checksum:47874913fa24493aa71dc39d3ff41d1dc1f36719eea32c2fb1b6a1aef1a09ac9 
> (in-memory)
> # Trying to read secondary LUKS2 header at offset 0x4000.
> # Reusing open ro fd on device image.iso
> # LUKS2 header version 2 of size 16384 bytes, checksum sha256.
> # 
> Checksum:29975a514962a03e116133c091e725a47e5b6ccb077cf6e1502a259618737297 
> (on-disk)
> # 
> Checksum:29975a514962a03e116133c091e725a47e5b6ccb077cf6e1502a259618737297 
> (in-memory)
> # Device size 16777216, offset 16777216.
> # Device image.iso READ lock released.
> # Only 2 active CPUs detected, PBKDF threads decreased from 4 to 2.
> # PBKDF argon2i, time_ms 2000 (iterations 0), max_memory_kb 1048576, 
> parallel_threads 2.
> # Activating volume volume1 using token -1.
> # Interactive passphrase entry requested.
> Enter passphrase for image.iso:
> # Activating volume volume1 [keyslot -1] using passphrase.
> # dm version   [ opencount flush ]   [16384] (*1)
> # dm versions   [ opencount flush ]   [16384] (*1)
> # Detected dm-ioctl version 4.42.0.
> # Detected dm-crypt version 1.21.0.
> # Device-mapper backend running with UDEV support enabled.
> # dm status volume1  [ opencount noflush ]   [16384] (*1)
> # Keyslot 0 priority 1 != 2 (required), skipped.
> # Trying to open LUKS2 keyslot 0.
> # Reading keyslot area [0x8000].
> # Acquiring read lock for device image.iso.
> # Verifying lock handle for image.iso.
> # Device image.iso READ lock taken.
> # Reusing open ro fd on device image.iso
> # Device image.iso READ lock released.
> # Verifying key from keyslot 0, digest 0.
> # Loading key (64 bytes, type logon) in thread keyring.
> # dm versions   [ opencount flush ]   [16384] (*1)
> # dm status volume1  [ opencount noflush ]   [16384] (*1)
> # Allocating a free loop device.
> # Trying to open device /dev/loop6 without direct-io.
> Requested offset is beyond real size of device image.iso.
> # Requesting keyring logon key for revoke and unlink.
> # Releasing crypt device image.iso context.
> # Releasing device-mapper backend.
> # Closing read only fd for image.iso.
> # Closed loop /dev/loop6 (image.iso).
> # Unlocking memory.
> Command failed with code -1 (wrong or missing parameters).



I've not tested jet the Carlos way, but in the next days I will let you 
know:

"Carlos E. R." ha scritto:
> Hum. I created encrypted DVD years ago with a similar procedure,
> somewhat simpler. Basically, I created an empty file of the same size 
> as
> the CD or DVD, mounted it as a loop device, then I encrypted that loop
> device, and then I formatted the resulting luks device with any
> filesystem type I wished, typically XFS.
> 
> This, so far, still works.
> 
> Then I just burn that file to DVD.


and

"Milan Broz" ha scritto:
> Are you sure that your *.iso image was correctly created? It seems to 
> me that
> it is just LUKS header without data (that's why "beyond offset" error).
> 
> Milan

No I'm not sure, indeed I think it's as you say. And I think this is a 
block size problem almost certainly!


Eventually if you have any other way, maybe tested by you, for the 
creation of encrypted cdroms/cdvs, would you please me ;-)

Many thanks!


Davide
_______________________________________________
dm-crypt mailing list
[email protected]
https://www.saout.de/mailman/listinfo/dm-crypt