Re: error -19 with SMC2835W
"Linuxant support (Jonathan)" <[email protected]>
| Newsgroups | gmane.linux.kernel.driver-loader |
|---|---|
| Message-ID | <[email protected]> |
Hi, you could try with a fresh 2.6.12.x kernel from http://www.kernel.org to see if there is a difference. It is possible that the ACPI bug you have experienced might be fixed in this newer kernel. Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] [email protected] wrote: > Update: disabling ACPI (by passing acpi=off on the kernel command line) > fixes it. So, now the question is: does anyone have any idea how I can > get ACPI and the SMC to coexist peacefully? > > Thanks, > > Avdi Grimm > > >>Hi there, >> >>I've been trying to get my SMC 2835W cardbus adapter up and running on a >>Thinkpad under Ubuntu 5.04. Since the Prism54 drivers failed to work, I >>thought I'd give driverloader a shot. I suspect, because Prism54 failed, >>that it is one of the newer "SoftMAC" revisions of the card, but I don't >>know for sure. >> >>Driverloader gives me errors on load. The relevent kernel output appears >>to be: >> >> driverloader: 2835wc51.sys: 0xc6c23000..0x6c81380 entry = c6c445de >>(pbase = 0x10000) >> ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 9 (level, low) -> IRQ 9 >> wlan0: failed to initialize adapter (err = -19) >> wlan0: failed to register net device (-19) >> >>Any help would be appreciated. >> >>Avdi Grimm >>_______________________________________________ >>driverloader mailing list >>[email protected] >>https://www.linuxant.com/mailman/listinfo/driverloader >> >> > > > > _______________________________________________ > driverloader mailing list > [email protected] > https://www.linuxant.com/mailman/listinfo/driverloader