Re: Problem with Linksys WUSB11 Wireless USB adapter
"Linuxant support (Jonathan)" <[email protected]>
| Newsgroups | gmane.linux.kernel.driver-loader |
|---|---|
| Message-ID | <[email protected]> |
Hi, the Linksys WUSB11 (V2.6 with USB ID 077B:2219) is based on the Atmel chipset which is not currently supported by DriverLoader 2.30. If you have a different version of this model, it is possible that it is based on another chipset that is currently supported by DriverLoader. Please generate and send at [email protected] the 'dumpdiag'. You should generate this dump while the Windows XP driver is installed with the Web Configurator and the wireless device is attached to the machine. This information will help us determine if we could add support for your wireless device in DriverLoader with a trivial modification to the DriverLoader source code. Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] Rohan Shrivastava wrote: > Hi there, > > Recently I came to know about Driverloader, > I used it to make use of LinkSys USB wireless adapter > in SuSE 9.0 Linux. I also have its windows driver. > > First I installed Driverloader through > # sh dldrinstall.run -- --tty > command, > but when I tried to configure the driver through browser by selecting an > ini and its asked sys files of the driver, it gave me an error page. > > After this I generated a report by > # dldrconfig --dumpdiag > command. > > Can I send the generated file in the group. > > Please tell me what could be the error in this process. > > Any help will be highly appreciated > > Thanks > -Rohan > > > > <http://adworks.rediff.com/cgi-bin/AdWorks/sigclick.cgi/www.rediff.com/signature-home.htm/1507191490@Middle5?PARTNER=3> > > > > ------------------------------------------------------------------------ > > _______________________________________________ > driverloader mailing list > [email protected] > https://www.linuxant.com/mailman/listinfo/driverloader