Re: card connecting but can't connect to internet

Hi,

we can see quite a lot of similar messages in your 'dmesg':

---
SFW2-IN-ILL-TARGET IN=wlan0 OUT= 
MAC=ff:ff:ff:ff:ff:ff:00:0e:a6:12:41:eb:08:00 SRC=192.168.0.100 
DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=56483 PROTO=UDP 
SPT=137 DPT=137 LEN=58
---

The problem is likely related to the firewall installed on the machine. 
Please disable it to see if it makes a difference.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Nicholas Neuberger - Home wrote:
> I'm trying to setup a linksys wireless card on my laptop and I'm getting a bit 
> further.  I found the right driver for my wireless card.
> 
> The web config browser port says the driver is loaded and I get a "power" 
> light on on my wireless card.  Kwifimanager sees the connection with an IP 
> address from my WAP, but I still can't connect for some reason
> 
> I even try to configure kwifimanager with a "config" but still no luck.  Plus, 
> the kwifimanager isn't saving the settings.
> 
> I was thinking it may be a route problem or a firewall issue.
> 
> I have attached the dump file.
> 
> Any thoughts!!!!
> 
> Nick Neuberger
> 
> _______________________________________________
> driverloader mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/driverloader