Re: "advanced" config screen ??

"Linuxant support (Jonathan)" <[email protected]> Wed, 21 Dec 2005 13:12:05 -0500
Newsgroups gmane.linux.kernel.driver-loader
Message-ID <[email protected]>
Hi,

as Keith mentioned, setting the WEP key with the network configuration 
tool of your Linux distribution is the recommended way to it with 
DriverLoader.

Alternatively, you can use the low-level tool 'iwconfig' to set the WEP 
key if you prefer, it will should work fine.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



[email protected] wrote:
> Lindsay Haisley <[email protected]> wrote:
> 
> 
>>Thus spake Linuxant support (Jonathan) on Wed, Dec 21, 2005 at 09:16:07AM CST
>>
>>>Hi,
>>>
>>>the options available on the advanced configuration page depend on the 
>>>Windows XP driver installed and it can be normal that there is simply no 
>>>advanced parameters at all.
>>
>>Makes good sense ....
>>
>>
>>>Since the page generated had a lot of empty HTML tags, it is possible 
>>>that there are advanced features but the DriverLoader INF parser had a 
>>>problem to load them for an unknown reason.
>>
>>Makes more good sense ....
>>
>>
>>>Changing the advanced settings is, most of the time, not required for a 
>>>typical use of DriverLoader.
>>
>>True.  I'm thankful to have _anything_ that works reliably with the Broadcom
>>chipset in this wireless card.  I had hoped that I'd find some way to set a
>>WEP key if I ever need to, but I may be able to do this with iwconfig.
>>
>>-- 
>>Lindsay Haisley       | "Everything works    |     PGP public key
>>FMP Computer Services |       if you let it" |      available at
>>512-259-1190          |    (The Roadie)      | <http://www.fmp.com/pubkeys>
>>http://www.fmp.com    |                      |
>>_______________________________________________
>>driverloader mailing list
>>[email protected]
>>https://www.linuxant.com/mailman/listinfo/driverloader
>>
> 
> 
> You can easily set up WEP under Ubuntu via network card. Driverloader should cause it to be seen by the netconfiguration app and then just set the parameters there.
> 
> --Keith
> _______________________________________________
> driverloader mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/driverloader