Re: Can´t get the USR5422 driver to be loaded

"Linuxant support (Jonathan)" <[email protected]> Tue, 03 Jan 2006 16:03:34 -0500
Newsgroups gmane.linux.kernel.driver-loader
Message-ID <[email protected]>
Hi,

in the dump you have sent to [email protected], we can see the 
following error messages in your 'dmesg':

---
/home/wifi/builds/200510211338/driverloader-2.30/packages/BUILD/driverloader-2.30/modules/osusb.c: 
UsbDataCompletionRoutine: error: URB status -75
/home/wifi/builds/200510211338/driverloader-2.30/packages/BUILD/driverloader-2.30/modules/osusb.c: 
UsbDataCompletionRoutine: error: URB status -75
/home/wifi/builds/200510211338/driverloader-2.30/packages/BUILD/driverloader-2.30/modules/osusb.c: 
UsbDataCompletionRoutine: error: URB status -32
/home/wifi/builds/200510211338/driverloader-2.30/packages/BUILD/driverloader-2.30/modules/osusb.c: 
UsbDataCompletionRoutine: error: URB status -75
driverloader: NdisWriteErrorLogEntry: ErrorCode=HARDWARE_FAILURE 
NumberOfErrorValues=3
driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0xc0000001
driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x6d695442
driverloader: NdisWriteErrorLogEntry: ErrorValue 2=0x00000037
eth0: failed to initialize adapter (err = -19)
eth0: Failed to register net device (-19)
---

It seems that there is a serious error while trying to send/receive data 
with the USB wireless device. Did you tried other USB devices on this 
machine just to make sure that the USB subsystem of the kernel is 
correctly working?

You could try with different versions of the Windows XP driver to see if 
there is a difference. Different Linux kernels could also be tried.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



[email protected] wrote:
>     Hi there,
> 
>     When trying to upload the manufacturer windows driver for the US Robotics USB 5422 802.11g WiFi adapter, I get the notification that the device is not present or has some problem. It works fine in windows xp.
> 
>     Find attached the dldrconfig --dumpdiag file.
> 
>     I´ve tryied that with the standar FC4 2.6.14...1644, and the same kernel with 16k stacks from the driverloader download page.
> 
>     Any possible solution?
> 
> David.
> 
> _______________________________________________
> driverloader mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/driverloader