Problemas na Instalação de 1 Device 3COM no D ebian
[email protected] Mon, 17 Apr 2006 14:01:00 -0300 (BRT)
| Newsgroups | gmane.linux.kernel.driver-loader |
|---|---|
| Message-ID | <[email protected]> |
Hi,
I'm having problems to install a 3Com OfficeConnect Wireless 108Mbps
11g USB Adapter at a Debian Sarge 3.1. Kernelversion is 2.6 and i
installed driverloader with sucsess(i hope).So, wWhen i select the
drivers(2 *.inf) at browse from cd-rom, the device is not found. I´m
sending with the email a driverloagdialog.txt to help anything.
ty for any reply!
_______________________________________________
driverloader mailing list
[email protected]
https://www.linuxant.com/mailman/listinfo/driverloader
driverloaderdiag.txt
(text/plain, 16 KB)
+ dldrstop ERROR: Removing 'driverloader': Device or resource busy + modprobe -v driverloader + lsmod Module Size Used by iptable_filter 3072 0 ip_tables 16896 1 iptable_filter nls_cp437 6016 1 isofs 33976 1 ipv6 229892 16 driverloader 327824 0 floppy 54992 0 parport_pc 33348 0 parport 37320 1 parport_pc analog 10784 0 pcspkr 3816 0 rtc 12088 0 snd_ens1371 23012 0 snd_rawmidi 23204 1 snd_ens1371 snd_seq_device 7944 1 snd_rawmidi snd_pcm 85384 1 snd_ens1371 snd_page_alloc 11144 1 snd_pcm snd_timer 23300 1 snd_pcm snd_ac97_codec 59268 1 snd_ens1371 snd 50660 6 snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_ac97_codec 8139cp 19072 0 shpchp 87148 0 pciehp 83948 0 pci_hotplug 30640 2 shpchp,pciehp sis_agp 8068 1 agpgart 31784 1 sis_agp ohci_hcd 19460 0 usbcore 104164 4 driverloader,ohci_hcd es1371 33472 1 soundcore 9824 3 snd,es1371 gameport 4736 3 analog,snd_ens1371,es1371 ac97_codec 16908 1 es1371 8139too 23936 0 mii 4864 2 8139cp,8139too sis900 18436 0 tsdev 7168 0 mousedev 9996 2 evdev 9088 0 capability 4872 0 commoncap 7168 1 capability psmouse 17800 0 ide_cd 38176 1 cdrom 35740 1 ide_cd ext3 109672 1 jbd 54552 1 ext3 ide_generic 1664 0 sis5513 15240 1 ide_disk 16768 3 ide_core 125028 4 ide_cd,ide_generic,sis5513,ide_disk unix 26036 439 font 8576 0 vesafb 6688 0 cfbcopyarea 3840 1 vesafb cfbimgblt 3200 1 vesafb cfbfillrect 3712 1 vesafb + date Mon Apr 17 13:55:22 BRT 2006 + /usr/sbin/dldrconfig --info Linuxant DriverLoader for Wireless LAN devices, version 2.33 No devices detected by driverloader If you need license keys, assistance or more information, please go to: http://www.linuxant.com/ When reporting a problem for the first time, please send us the file generated by "dldrconfig --dumpdiag". To complete the installation, please point your browser to: http://127.0.0.1:18020/ + identify_system linux-i686(i686)-2.6.8-2-386 Debian-3.1 + uname -a Linux italia 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005 i686 GNU/Linux + gcc -v Reading specs from /usr/lib/gcc-lib/i486-linux/3.3.5/specs Configured with: ../src/configure -v --enable-languages=c,c++,java,f77,pascal,objc,ada,treelang --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared --enable-__cxa_atexit --with-system-zlib --enable-nls --without-included-gettext --enable-clocale=gnu --enable-debug --enable-java-gc=boehm --enable-java-awt=xlib --enable-objc-gc i486-linux Thread model: posix gcc version 3.3.5 (Debian 1:3.3.5-13) + sh --version GNU bash, version 2.05b.0(1)-release (i386-pc-linux-gnu) Copyright (C) 2002 Free Software Foundation, Inc. + bash --version GNU bash, version 2.05b.0(1)-release (i386-pc-linux-gnu) Copyright (C) 2002 Free Software Foundation, Inc. + sed --version GNU sed version 4.1.2 Copyright (C) 2003 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, to the extent permitted by law. + awk --version awk: not an option: --version + cat -v /proc/version Linux version 2.6.8-2-386 ([email protected]) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 17:40:50 JST 2005 + cat -v /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 3 model name : AMD Duron(tm) Processor stepping : 1 cpu MHz : 946.031 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 1880.06 + cat -v /etc/debian_version 3.1 + dmesg Linux version 2.6.8-2-386 ([email protected]) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 17:40:50 JST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007ff8000 (ACPI data) BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32752 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28656 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa300 ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x07ff0000 ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x07ff0030 ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 Built 1 zonelists Kernel command line: root=/dev/hda2 ro Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) Detected 946.031 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 122532k/131008k available (1336k kernel code, 7936k reserved, 732k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1880.06 BogoMIPS Security Scaffold v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 CPU: AMD Duron(tm) Processor stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 945.0836 MHz. ..... host bus clock speed is 199.0123 MHz. checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4216k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS18 that hid as a SIS503 (compatible=1) Enabling SiS 96x SMBus. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f7190 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5c47, dseg 0xf0000 PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:02.2[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:02.3[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([email protected]) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 EISA: Probing bus 0 at eisa0 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4216 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 204k freed spurious 8259A interrupt: IRQ7. vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 2B020H1, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdd: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 248968k swap on /dev/hda1. Priority:-1 extents:1 EXT3 FS on hda2, internal journal hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 Capability LSM initialized mice: PS/2 mouse device common for all mice ts: Compaq touchscreen protocol output sis900.c: v1.08.07 11/02/2003 ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11 0000:00:03.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:03.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:d0:09:eb:70:b0. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11 eth1: RealTek RTL8139 at 0xd000, 00:e0:7d:b9:c7:30, IRQ 11 eth1: Identified 8139 chip type 'RTL-8139C' es1371: version v0.32 time 17:47:41 May 19 2005 ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11 es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09 es1371: found es1371 rev 9 at io 0xcc00 irq 11 joystick 0x0 ac97_codec: AC97 Audio codec, id: CRY19 (Cirrus Logic CS4297A rev A) usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI interrupt 0000:00:02.2[D] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.2: Silicon Integrated Systems [SiS] USB 1.0 Controller ohci_hcd 0000:00:02.2: irq 11, pci mem c882e000 ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:02.3[A] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:02.3: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) ohci_hcd 0000:00:02.3: irq 5, pci mem c8845000 ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected SiS 735 chipset agpgart: Maximum main memory to use for agp memory: 94M agpgart: AGP aperture is 64M @ 0xd0000000 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) Real Time Clock Driver v1.12 input: PC Speaker parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] inserting floppy driver for 2.6.8-2-386 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 eth1: link up, 10Mbps, half-duplex, lpa 0x0000 driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 Linuxant inc.' taints kernel. driverloader: stack=8192/60/0 PREEMPT usbcore: registered new driver driverloader NET: Registered protocol family 10 Disabled Privacy Extensions on device c02cc960(lo) IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present ohci_hcd 0000:00:02.3: wakeup usb 2-1: new full speed USB device using address 2 driverloader: athfmwdl.sys: 0xc8a0c000..0xc8a16980 entry = c8a135e0 (pbase = 0x10000) driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16 driverloader: OsUsbClaimInterface: usb_driver_claim_interface returned -16 usb 2-1: USB disconnect, address 2 usb 2-1: new full speed USB device using address 3 driverloader: ar5523.sys: 0xc8a2e000..0xc8a73640 entry = c8a515e0 (pbase = 0x10000) driverloader: OsUsbMakeBulkOrIntTransfer: pUsbOsPipe=c23faee0/0xc0008380 no free URBs ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root ip_tables: (C) 2000-2002 Netfilter core team + iwconfig --version