Re: No DHCPOFFERS received.

Hi,

can you try with different versions of the Windows XP driver to see if 
there is a difference? You could also try to connect to an access point 
without WPA enabled to see if there is a difference.

If you require more assistance, please send at [email protected] the 
output of 'dumpdiag'. Type the following in a root shell:

---
dldrconfig --dumpdiag
---

Just send us the generated file located in /tmp 
('driverloaderdiag.txt'). It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Paul Warner wrote:
> Hi,
> 
> I am running the Netgear WG511v2, and with Linuxant
> I've been able to get my Ubuntu 5.10 system (running
> on an old Thinkpad T21 with a Pentium III processor)
> to see and activate the card.  And I have established
> that the card connects to the network when I have no
> security enabled.  I want to enable WPA-PSK, so I
> downloaded and installed dldrwpaconfig.  But following
> all the steps, I have been unable to get it to
> connect.  I have the wlan0 card set to use the right
> network, and have set it to use an ASCII passphrase,
> and left WEP blank.
> 
> The dhclient can't connect.  Any ideas what is going
> on?
> 
> Thanks,
> Paul
> 
> 
> output from dldrwpaconfig:
> me@mycomputer:/etc$ sudo /usr/sbin/dldrwpaconfig
> dldr_wpa_supplicant version 0.4.7.0.
> 
> Before you try to configure your wireless interface to
> use WPA, please make
> sure that you have configured your wireless interface
> using the network
> configuration tool provided in your Linux
> distribution. You should configure
> the wireless interface with WEP disabled.
> 
> Automatically selected the wireless interface 'wlan0'.
> Supports WPA with TKIP.
> 
> Automatically selected the access point with ESSID
> 'our-home-network'.
> 
> This configuration script only supports WPA-PSK
> ("WPA-Personal"), do you
> want to configure your wireless interface to use only
> WPA-PSK? [yes]
> Do you want to use a (H)EX pre-shared key or an
> (A)SCII passphrase? [A]
> Please enter a passphrase between 8 and 63 characters
> (inclusive) :
> long-string-here
> 
> Saving the configuration file...  Done.
> Reactivating the 'wlan0' interface...
> ifdown: interface wlan0 not configured
> There is already a pid file
> /var/run/dhclient.wlan0.pid with pid 1
> Internet Systems Consortium DHCP Client V3.0.2
> Copyright 2004 Internet Systems Consortium.
> All rights reserved.
> For info, please visit
> http://www.isc.org/products/DHCP
> 
> sit0: unknown hardware address type 776
> SIOCSIFFLAGS: Input/output error
> sit0: unknown hardware address type 776
> Listening on LPF/wlan0/00:0f:b5:8c:fa:3b
> Sending on   LPF/wlan0/00:0f:b5:8c:fa:3b
> Sending on   Socket/fallback
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
> interval 3
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
> interval 5
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
> interval 6
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
> interval 8
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
> interval 21
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
> interval 16
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
> interval 2
> No DHCPOFFERS received.
> No working leases in persistent database - sleeping.
> Done.
> 
> 
> output of dmesg:
> [4309729.940000] driverloader: ndisSetInformation:
> 802_11_SSID st=FAILURE retrying..
> [4309730.041000] driverloader: ndisSetInformation:
> 802_11_SSID st=FAILURE retrying..
> [4309730.142000] driverloader: ndisSetInformation:
> 802_11_SSID st=FAILURE W=0 N=0
> [4309730.142000] wlan0: Error -5 setting desired SSID
> [4309730.142000] wlan0: Unable to configure card;
> resetting...
> [4309730.142000] wlan0: Error -95 setting txpower (0)
> [4309730.142000] driverloader: ndisSetInformation:
> 802_11_SSID st=FAILURE retrying..
> [4309730.243000] driverloader: ndisSetInformation:
> 802_11_SSID st=FAILURE retrying..
> [4309730.344000] driverloader: ndisSetInformation:
> 802_11_SSID st=FAILURE W=0 N=0
> [4309730.344000] wlan0: Error -5 setting desired SSID
> [4309730.344000] wlan0: Error -5 configuring card
> [4309730.344000] wlan0: netndis_reset: Error -5
> reenabling card
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> driverloader mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/driverloader