Re: HSF driver install problems

Hi,

you have posted on the DriverLoader list instead of the HSF one. The HSF =

list information is available at:

https://www.linuxant.com/mailman/listinfo/hsflinux/

That kind of error happens when the kernel headers are installed but not =

configured to build 3rd party kernel modules. Since you are using a =

kernel packaged with a Linux distribution, you will probably need to =

install all the configured kernel headers in order to use a generic =

package. On OpenSUSE, you can probably install this with the 'yast -i =

kernel-source' command in a root shell.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Rentner_Hans wrote:
> Hello,
> Some days ago I have purchased an internal modem card (Devolo mocrolink =

> 56k PCI; PCI ID: 14F1:2014 ), and I was trying to install a proper =

> driver for Opensuse linux 11.0 with a kernel 2.6.25.18.
> I found  in  http://www.linuxant.com/drivers/hsf/downloads-license.php  =

> your tool cnxtinstall.run. =

> <https://www.linuxant.com/drivers/hsf/full/archive/cnxtinstall.run>
> Also I found some files separately in =

> https://www.linuxant.com/drivers/hsf/full/downloads.php.
> And I tried to install the drivers with your automatic tool and with the =

> rpm-tool.
> But everytime I got  messages like
> snip-------
> warning: hsfmodem-7.68.00.14full-1.i386.rpm: Header V3 DSA signature: =

> NOKEY, key ID 5dfbf7dc
> Conexant HSF softmodem driver, version 7.68.00.14full
> =

> If you need license keys, assistance or more information, please go to:
>     http://www.linuxant.com/
> =

> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
> =

> =

> No pre-built modules for: SuSE-11.0 linux-2.6.25.18-0.2-rt i686-SMP
> =

> Trying to automatically build the driver modules...
> (this requires a C compiler and proper kernel sources to be installed)
> =

> =07WARNING: the kernel version () defined in
> /usr/src/linux/include/linux/version.h
> does not match the currently running kernel (2.6.25.18-0.2-rt)
> The cause of this problem is an incorrect kernel source path.
> Please check that /usr/src/linux points to the right tree.
> The cause of this is usually a missing or unconfigured
> kernel source tree (and sometimes an incorrect directory or symbolic link=
).
> =

> However, proper /boot/config-2.6.25.18-0.2-rt was found.
> =

> Unable to prepare temporary kernel tree
> =

> First, ensure that the proper kernel source and compiler packages
> from your distribution vendor and/or the community are installed.
> =

> The Linux kernel can then be reconfigured by running "make menuconfig"
> under the kernel source directory (usually /usr/src/linux).
> =

> Verify that the proper options for your system are selected.
> =

> Then compile and install your new kernel (for more information about
> this procedure, see the README file under the kernel source directory),
> reboot the system using the new kernel, and re-run "hsfconfig".
> error: %post(hsfmodem-7.68.00.14full-1.i386) scriptlet failed, exit =

> status 124
> snap --------
> =

> In one webpage I found a remark, that "version.h" is never used in newer =

> kernel releases.
> Now I don't know how to go on.
> Have you any hint for me? (meanwhile I have tried it with another Suse =

> kernel 2.6.25.5, but w/o success)
> Please help me!
> =

> -- =

> Mit freundlichem Gru=DF / Best regards
> =

> Hans =

> =

> =

> ------------------------------------------------------------------------
> =

> _______________________________________________
> driverloader mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/driverloader