[PATCH v2 RESEND] dmaengine: mediatek: hsdma: fix runtime PM leak on init failure

Myeonghun Pak <[email protected]>
Newsgroups gmane.linux.kernel,gmane.linux.ports.arm.kernel,gmane.linux.ports.arm.mediatek
Message-ID <[email protected]>
mtk_hsdma_hw_init() enables runtime PM and gets a runtime PM reference
before enabling the HSDMA clock. It currently ignores failures from
pm_runtime_get_sync(); if runtime resume fails, the usage count remains
held. If clk_prepare_enable() then fails, the usage count remains held.

Use devm_pm_runtime_enable() to manage runtime PM enablement, and use
pm_runtime_resume_and_get() so resume failures do not leak the usage count.
If clk_prepare_enable() fails after a successful runtime resume, drop the
runtime PM reference before returning.

The probe path also ignores the return value from mtk_hsdma_hw_init(), so a
failed hardware init can continue as a successful probe. Propagate
mtk_hsdma_hw_init() failures from probe, while keeping a separate unwind
label so mtk_hsdma_hw_deinit() is only called after hardware init succeeds.

Fixes: 548c4597e984 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC")
Co-developed-by: Ijae Kim <[email protected]>
Signed-off-by: Ijae Kim <[email protected]>
Signed-off-by: Myeonghun Pak <[email protected]>

---
Changes in v2:
- Use devm_pm_runtime_enable() for runtime PM enablement.
- Drop manual pm_runtime_disable() calls from init/deinit paths.

 drivers/dma/mediatek/mtk-hsdma.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
index a43412ff5e..27cb370106 100644
--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -848,17 +848,27 @@ static int mtk_hsdma_hw_init(struct mtk_hsdma_device *hsdma)
 {
 	int err;
 
-	pm_runtime_enable(hsdma2dev(hsdma));
-	pm_runtime_get_sync(hsdma2dev(hsdma));
+	err = devm_pm_runtime_enable(hsdma2dev(hsdma));
+	if (err)
+		return err;
+
+	err = pm_runtime_resume_and_get(hsdma2dev(hsdma));
+	if (err < 0)
+		return err;
 
 	err = clk_prepare_enable(hsdma->clk);
 	if (err)
-		return err;
+		goto err_put_pm;
 
 	mtk_dma_write(hsdma, MTK_HSDMA_INT_ENABLE, 0);
 	mtk_dma_write(hsdma, MTK_HSDMA_GLO, MTK_HSDMA_GLO_DEFAULT);
 
 	return 0;
+
+err_put_pm:
+	pm_runtime_put_sync(hsdma2dev(hsdma));
+
+	return err;
 }
 
 static int mtk_hsdma_hw_deinit(struct mtk_hsdma_device *hsdma)
@@ -868,7 +878,6 @@ static int mtk_hsdma_hw_deinit(struct mtk_hsdma_device *hsdma)
 	clk_disable_unprepare(hsdma->clk);
 
 	pm_runtime_put_sync(hsdma2dev(hsdma));
-	pm_runtime_disable(hsdma2dev(hsdma));
 
 	return 0;
 }
@@ -983,7 +992,9 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 		goto err_unregister;
 	}
 
-	mtk_hsdma_hw_init(hsdma);
+	err = mtk_hsdma_hw_init(hsdma);
+	if (err)
+		goto err_free;
 
 	err = devm_request_irq(&pdev->dev, hsdma->irq,
 			       mtk_hsdma_irq, 0,
@@ -991,7 +1002,7 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev,
 			"request_irq failed with err %d\n", err);
-		goto err_free;
+		goto err_deinit;
 	}
 
 	platform_set_drvdata(pdev, hsdma);
@@ -1000,8 +1011,9 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_free:
+err_deinit:
 	mtk_hsdma_hw_deinit(hsdma);
+err_free:
 	of_dma_controller_free(pdev->dev.of_node);
 err_unregister:
 	dma_async_device_unregister(dd);
-- 
2.47.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.