[PATCH v3 1/2] arm64: dts: ti: Correct white-space style
Krzysztof Kozlowski <[email protected]>
| Newsgroups | gmane.linux.kernel,gmane.linux.ports.arm.kernel,gmane.linux.drivers.devicetree |
|---|---|
| Message-ID | <[email protected]> |
Correct a few white-space issues, like missing space before bracket '{'
character or spurious space, which will be flagged by dt-check-style
("redundant-whitespace" warning). No functional changes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Changes in v2:
1. None
---
arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts | 2 +-
arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
index adf4da7dfa2d..a1a878d88e96 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
@@ -54,7 +54,7 @@ AM65X_IOPAD(0x01d8, PIN_OUTPUT, 7) /* (AH12) GPIO1_22 */
>;
};
- main_spi0_pins: main-spi0-default-pins {
+ main_spi0_pins: main-spi0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
index dc0d3cf2f985..3e2377160d82 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
@@ -143,7 +143,7 @@ &main_cpsw0 {
};
/* Aquila ETH_2 SGMII PHY */
-&main_cpsw0_port8 {
+&main_cpsw0_port8 {
phy-handle = <&cpsw0_port8_phy4>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 689ba2ff81f7..d66e71db4697 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -1068,7 +1068,7 @@ &dss_ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ port@0 {
reg = <0>;
dpi0_out: endpoint {
--
2.53.0