[PATCH v2 05/17] arm64: dts: imx93-11x11-evk: Add MQS1 pinmux, clocks and mark conflicting devices

Chancel Liu <[email protected]>
Newsgroups gmane.linux.drivers.devicetree,gmane.linux.ports.arm.kernel,gmane.linux.kernel
Message-ID <[email protected]>
From: Chancel Liu <[email protected]>

MQS1 shares pins with PDM and its sound card conflicts with the BT SCO
card. Add the MQS1 pinctrl group and label the conflicting device and
card so the shared imx9-mqs overlay can disable them. The overlay and
its Makefile rule are added in a later patch.

Update SAI1 clock assignments to provide the MQS MCLK source.

Signed-off-by: Chancel Liu <[email protected]>
---
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 4418fc6a0901..71822d06ebf6 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -71,7 +71,7 @@ bt_sco_codec: bt-sco-codec {
 		#sound-dai-cells = <1>;
 	};
 
-	sound-bt-sco {
+	mqs1_conflict_card: sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "bt-sco-audio";
 		simple-audio-card,format = "dsp_a";
@@ -105,7 +105,7 @@ cpu {
 	};
 };
 
-&micfil {
+mqs1_conflict_dev: &micfil {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_pdm>, <&pdm_fun>;
 	pinctrl-1 = <&pinctrl_pdm_sleep>;
@@ -115,6 +115,11 @@ &micfil {
 	status = "okay";
 };
 
+&mqs1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mqs1>, <&mqs1_fun>;
+};
+
 &pcal6524 {
 	m2-pcm-level-shifter-hog {
 		gpio-hog;
@@ -127,6 +132,10 @@ &sai1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_sai1>;
 	pinctrl-1 = <&pinctrl_sai1_sleep>;
+	clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+		 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+		 <&clk IMX93_CLK_DUMMY>, <&clk IMX93_CLK_AUDIO_PLL>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k";
 	assigned-clocks = <&clk IMX93_CLK_SAI1>;
 	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
 	assigned-clock-rates = <12288000>;
@@ -150,6 +159,13 @@ &usdhc3 {
 };
 
 &iomuxc {
+	pinctrl_mqs1: mqs1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__MQS1_LEFT			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT		0x31e
+		>;
+	};
+
 	pinctrl_pdm: pdmgrp {
 		fsl,pins = <
 			MX93_PAD_PDM_CLK__PDM_CLK			0x31e
-- 
2.50.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.