[PATCH v3 0/2] thermal: Add support A9
Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
| Newsgroups | gmane.linux.drivers.devicetree,gmane.linux.power-management.general,gmane.linux.kernel |
|---|---|
| Message-ID | <[email protected]> |
Document the thermal controller compatibles for the Amlogic A9 SoC And add driver support for the Amlogic A9 thermal controller. Signed-off-by: Xianwei Zhao <[email protected]> --- Changes in v3: - Binding: add restrictive conditions for clock, and remove remove "amlogic,hw-reset-temp" property. - Driver: add private data reset_temp instead of get value from DTS. - Link to v2: https://lore.kernel.org/r/20260811-a9-thermal-v2-0-7ddc33b11b9a-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org Changes in v2: - Fix the spelling mistakes (clock-names) and reset-temp properties is visible to old chips. - Adjust the clock enable sequence in resume func and remove the clock disable in remove func. - Add the judgment on the divisor zero. - Add description of support for over-temperature reset for old chips in commit message. - Link to v1: https://lore.kernel.org/r/20260730-a9-thermal-v1-0-d786d37cba58-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org --- Xianwei Zhao (2): dt-bindings: thermal: amlogic: Add A9 thermal bindings thermal: amlogic: Add support for A9 thermal controller .../bindings/thermal/amlogic,thermal.yaml | 27 ++++- drivers/thermal/amlogic_thermal.c | 113 ++++++++++++++++++++- 2 files changed, 136 insertions(+), 4 deletions(-) --- base-commit: 78bc8af4affb9a732504eb22eeac7d1e50883853 change-id: 20260703-a9-thermal-f62cef6ea91f Best regards, -- Xianwei Zhao <[email protected]>