[leaf-commits] src/bering-uclibc4/source/keepalived buildtool.cfg, NONE, 1.1 buildtool.mk, NONE, 1.1 keepalived-1.1.20.tar.gz, NONE, 1.1 keepalived.conf, NONE, 1.1 keepalived.init, NONE, 1.1

Update of /cvsroot/leaf/src/bering-uclibc4/source/keepalived
In directory sfp-cvsdas-2.v30.ch3.sourceforge.com:/tmp/cvs-serv17652/source/keepalived

Added Files:
	buildtool.cfg buildtool.mk keepalived-1.1.20.tar.gz 
	keepalived.conf keepalived.init 
Log Message:
keepalived updated to 1.1.20


--- NEW FILE: keepalived.conf ---
! Configuration File for keepalived

global_defs {
   notification_email {
     [email protected]
   }
   notification_email_from [email protected]
   smtp_server 192.168.1.200
   smtp_connect_timeout 30
   lvs_id LVS_ATTR1
}

!vrrp_sync_group RWC1 BACKUP {
!    VI_1
!    VI_2
!    }

vrrp_instance VI_1 {
    state MASTER
    track_interface {
	eth0
    }
    interface eth2
    virtual_router_id 51
    priority 150
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass SECRETPASS
    }
    virtual_ipaddress {
        192.168.1.210
    }
}

vrrp_instance VI_2 {
    state SLAVE
    track_interface {
	eth0
    }
    interface eth2
    virtual_router_id 52
    priority 100
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass SECRETPASS
    }
    virtual_ipaddress {
        192.168.1.211
    }
}

--- NEW FILE: buildtool.cfg ---
<File buildtool.mk>
        Server = cvs4-sourceforge
	Revision = HEAD
        Directory = keepalived
</File>

<File keepalived-1.1.20.tar.gz>
	Server = cvs4-sourceforge
	Revision = HEAD
	Directory = keepalived
	envname = KEEPALIVED_SOURCE		
</File>

#<File keepalived.opensslwarning.patch.gz>
#        Server = cvs4-sourceforge
#	Revision = HEAD
#        Directory = keepalived
#	envname = KEEPALIVED_PATCH1
#</File>

<File keepalived.init>
        Server = cvs4-sourceforge
	Revision = HEAD
        Directory = keepalived
</File>

<File keepalived.conf>
        Server = cvs4-sourceforge
	Revision = HEAD
        Directory = keepalived
</File>

<Package>
	<kpalived>
	
		Version  = 1.1.20
		Revision = 1
		
		Help <<EOF
			keepalived package for healthcheck and failover (HSRP)
			Homepage: http://keepalived.sourceforge.net
			Requires: libpopt.lrp, libssl.lrp, libcrpto.lrp
			LEAF package by __PACKAGER__, __BUILDDATE__

			EOF
	
		<Permissions>
			Files = 644
			Directories = 755
		</Permissions>
		
		<Owner>
				Files = root:root
				Directories = root:root
		</Owner>
	
		<Contents>
			<File>
				Filename 	= etc/keepalived/keepalived.conf
				Source	   	= etc/keepalived/keepalived.conf
				Description = keepalived config file
				Type		= conf
				Type		= local
				Type		= binary
			</File>
			
			<File>
				Filename 	= etc/init.d/keepalived
				Source	   	= etc/init.d/keepalived
				Description = keepalived daemon init file 
				Type		= binary
				Permissions = 755
			</File>
			
			<File>		
				Source	   	= usr/sbin/keepalived
				Filename 	= usr/sbin/keepalived
				Type		= binary
				Permissions = 755
			</File>
			
			<File>		
				Source	    = usr/bin/genhash
				Filename 	= usr/bin/genhash
				Type		= binary
				Permissions = 755
			</File>		
			
		</Contents>
	</kpalived>
</Package>

--- NEW FILE: buildtool.mk ---
#############################################################
#
# keepalived
#
# $Id: buildtool.mk,v 1.1 2010/08/07 12:06:26 nitr0man Exp $
#############################################################

include $(MASTERMAKEFILE)

KEEPALIVED_DIR:=$(shell $(BT_TGZ_GETDIRNAME) $(KEEPALIVED_SOURCE) 2>/dev/null )
ifeq ($(KEEPALIVED_DIR),)
KEEPALIVED_DIR:=$(shell cat DIRNAME)
endif
KEEPALIVED_TARGET_DIR:=$(BT_BUILD_DIR)/keepalived


$(KEEPALIVED_DIR)/.source: 
	zcat $(KEEPALIVED_SOURCE) | tar -xvf -
#	(cd $(KEEPALIVED_DIR); zcat ../$(KEEPALIVED_PATCH1) | patch -p1)
	echo $(KEEPALIVED_DIR) > DIRNAME
	touch $(KEEPALIVED_DIR)/.source

$(KEEPALIVED_DIR)/.configured: $(KEEPALIVED_DIR)/.source
	(cd $(KEEPALIVED_DIR); rm -rf config.cache; autoconf; \
		CPPFLAGS="-I$(BT_STAGING_DIR)/include -I$(BT_STAGING_DIR)/usr/include" \
		LDFLAGS="-L $(BT_STAGING_DIR)/lib -L $(BT_STAGING_DIR)/usr/lib" \
		LD_RUN_PATH="$(BT_STAGING_DIR)/lib:$(BT_STAGING_DIR)/usr/lib" \
		CFLAGS="$(BT_COPT_FLAGS)" \
		CC=$(TARGET_CC) \
		LD=$(TARGET_LD) \
		./configure \
		--prefix=/usr \
		--build=$(GNU_HOST_NAME) \
		--host=$(GNU_HOST_NAME) \
		--with-kernel-dir=$(BT_LINUX_DIR) \
		 );
		touch $(KEEPALIVED_DIR)/.configured

$(KEEPALIVED_DIR)/.build: $(KEEPALIVED_DIR)/.configured
	make CC=$(TARGET_CC) -C $(KEEPALIVED_DIR) all 
	-mkdir -p $(KEEPALIVED_TARGET_DIR)/etc/keepalived	
	-mkdir -p $(KEEPALIVED_TARGET_DIR)/etc/init.d	
	-mkdir -p $(KEEPALIVED_TARGET_DIR)/usr/bin	
	-mkdir -p $(KEEPALIVED_TARGET_DIR)/usr/sbin
	-$(BT_STRIP) $(BT_STRIP_BINOPTS) $(KEEPALIVED_DIR)/bin/genhash	
	-$(BT_STRIP) $(BT_STRIP_BINOPTS) $(KEEPALIVED_DIR)/bin/keepalived	
	cp keepalived.init $(KEEPALIVED_TARGET_DIR)/etc/init.d/keepalived 
	cp keepalived.conf $(KEEPALIVED_TARGET_DIR)/etc/keepalived/keepalived.conf 
	cp -f $(KEEPALIVED_DIR)/bin/genhash $(KEEPALIVED_TARGET_DIR)/usr/bin/
	cp -f $(KEEPALIVED_DIR)/bin/keepalived $(KEEPALIVED_TARGET_DIR)/usr/sbin/
	cp -a -f $(KEEPALIVED_TARGET_DIR)/* $(BT_STAGING_DIR)  	
	touch $(KEEPALIVED_DIR)/.build

source: $(KEEPALIVED_DIR)/.source

build: $(KEEPALIVED_DIR)/.build
	
clean:
	-rm -f $(KEEPALIVED_DIR)/.build
	-rm -f $(KEEPALIVED_DIR)/.configured
	-make -C $(KEEPALIVED_DIR) clean
	-rm -rf $(KEEPALIVED_TARGET_DIR)

srcclean:
	-rm -rf $(KEEPALIVED_DIR) 



--- NEW FILE: keepalived.init ---
#! /bin/sh
#
# keepalived   LVS cluster monitor daemon.
#
#              Written by Andres Salomon <[email protected]>
#
RCDLINKS="2,S50 3,S50 4,S50 5,S50 0,K50 1,K50 6,K50 "

PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/keepalived
NAME=keepalived
DESC=keepalived

set -e
test -f $DAEMON || exit 0

case "$1" in
  start)
       echo -n "Starting $DESC: "
       start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
               --exec $DAEMON
       echo "$NAME."
       ;;
  stop)
       echo -n "Stopping $DESC: "
       start-stop-daemon --oknodo --stop --quiet --pidfile /var/run/$NAME.pid \
               --exec $DAEMON
       echo "$NAME."
       ;;
  reload|force-reload)
       echo "Reloading $DESC configuration file."
       start-stop-daemon --stop --quiet --signal 1 --pidfile \
               /var/run/$NAME.pid --exec $DAEMON
       ;;
  restart)
       echo -n "Restarting $DESC: "
       start-stop-daemon --stop --quiet --pidfile \
               /var/run/$NAME.pid --exec $DAEMON
       sleep 1
       start-stop-daemon --start --quiet --pidfile \
               /var/run/$NAME.pid --exec $DAEMON
       echo "$NAME."
       ;;
  *)
       echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
       exit 1
       ;;
esac

exit 0

--- NEW FILE: keepalived-1.1.20.tar.gz ---
(This appears to be a binary file; contents omitted.)


------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev