[leaf-commits] src/bering-uclibc4/source/hash-shaper buildtool.cfg, 1.1.1.1, 1.2 hsh.conf, 1.1.1.1, 1.2 hsh.sh, 1.1.1.1, 1.2
Andrew <[email protected]> Mon, 22 Nov 2010 18:12:56 +0000
| Newsgroups | gmane.linux.leaf.cvs |
|---|---|
| Message-ID | <[email protected]> |
Update of /cvsroot/leaf/src/bering-uclibc4/source/hash-shaper
In directory sfp-cvsdas-2.v30.ch3.sourceforge.com:/tmp/cvs-serv14742
Modified Files:
buildtool.cfg hsh.conf hsh.sh
Log Message:
Updated to support multiple outgoing interfaces
Index: hsh.sh
===================================================================
RCS file: /cvsroot/leaf/src/bering-uclibc4/source/hash-shaper/hsh.sh,v
retrieving revision 1.1.1.1
retrieving revision 1.2
diff -C2 -d -r1.1.1.1 -r1.2
*** hsh.sh 26 Apr 2010 09:02:43 -0000 1.1.1.1
--- hsh.sh 22 Nov 2010 18:12:42 -0000 1.2
***************
*** 46,61 ****
}
! #init
initdev() {
echo $UPDEVINIT|sh
! $tc q d root dev $UPDEV 2>/dev/null
! $tc q a root dev $UPDEV handle 1: htb default 2
! $tc c a dev $UPDEV parent 1: classid 1:1 htb rate $URATE ceil $UCEIL $UBURST prio 1 quantum 1514
! $tc c a dev $UPDEV parent 1: classid 1:2 htb rate $URATE ceil $UCEIL $UBURST prio 2 quantum 1514
! $tc q a dev $UPDEV parent 1:2 handle 2: sfq perturb 10 quantum 1514
! $tc f a dev $UPDEV parent 1: prio 10 protocol ip u32
}
! #add rule $1 with addr $2 for table $3 with default speed
addrule() {
ar_id=$(($POOLWIDTH*($3+1)+$1))
--- 46,61 ----
}
! #init device $1
initdev() {
echo $UPDEVINIT|sh
! $tc q d root dev $1 2>/dev/null
! $tc q a root dev $1 handle 1: htb default 2
! $tc c a dev $1 parent 1: classid 1:1 htb rate $URATE ceil $UCEIL $UBURST prio 1 quantum 1514
! $tc c a dev $1 parent 1: classid 1:2 htb rate $URATE ceil $UCEIL $UBURST prio 2 quantum 1514
! $tc q a dev $1 parent 1:2 handle 2: sfq perturb 10 quantum 1514
! $tc f a dev $1 parent 1: prio 10 protocol ip u32
}
! #add rule $1 with addr $2 for table $3 with default speed on device $4
addrule() {
ar_id=$(($POOLWIDTH*($3+1)+$1))
***************
*** 64,84 ****
ar_h1=$(hex $1)
ar_h3=$(hex $3)
! $tc c a dev $UPDEV parent 1:1 classid 1:$ar_id htb rate $URATE ceil $UCEIL $UBURST prio 1 quantum 1514
! $tc c a dev $UPDEV parent 1:$ar_id classid 1:$ar_id1 htb rate $UHRATE ceil $UCEIL $UBURST prio 2 quantum 1514
! $tc c a dev $UPDEV parent 1:$ar_id classid 1:$ar_id2 htb rate $UHRATE ceil $UCEIL $UBURST prio 1 quantum 1514
! $tc q a dev $UPDEV parent 1:$ar_id1 handle $ar_id1: sfq perturb 10 quantum 1514
! $tc q a dev $UPDEV parent 1:$ar_id2 handle $ar_id2: sfq perturb 10 quantum 1514
! $tc f a dev $UPDEV parent 1: protocol ip prio 1 u32 ht $ar_h3:$ar_h1: \
match ip tos 0x10 0xff flowid 1:$ar_id2
! $tc f a dev $UPDEV parent 1: protocol ip prio 2 u32 ht $ar_h3:$ar_h1: \
match ip protocol 6 0xff match u8 0x45 0xff at 0 match u16 0x0000 0xffc0 at 2 \
match u8 0x10 0xff at 33 flowid 1:$ar_id2
! $tc f a dev $UPDEV parent 1: protocol ip prio 3 u32 ht $ar_h3:$ar_h1: \
match ip protocol 1 0xff flowid 1:$ar_id2
! $tc f a dev $UPDEV parent 1: protocol ip prio 4 u32 ht $ar_h3:$ar_h1: match ip src $2 \
flowid 1:$ar_id1
}
! #set speed for rule $1 in table $2 with rate $3 kbit
setspeed() {
ss_id=$(($POOLWIDTH*($2+1)+$1))
--- 64,84 ----
ar_h1=$(hex $1)
ar_h3=$(hex $3)
! $tc c a dev $4 parent 1:1 classid 1:$ar_id htb rate $URATE ceil $UCEIL $UBURST prio 1 quantum 1514
! $tc c a dev $4 parent 1:$ar_id classid 1:$ar_id1 htb rate $UHRATE ceil $UCEIL $UBURST prio 2 quantum 1514
! $tc c a dev $4 parent 1:$ar_id classid 1:$ar_id2 htb rate $UHRATE ceil $UCEIL $UBURST prio 1 quantum 1514
! $tc q a dev $4 parent 1:$ar_id1 handle $ar_id1: sfq perturb 10 quantum 1514
! $tc q a dev $4 parent 1:$ar_id2 handle $ar_id2: sfq perturb 10 quantum 1514
! $tc f a dev $4 parent 1: protocol ip prio 1 u32 ht $ar_h3:$ar_h1: \
match ip tos 0x10 0xff flowid 1:$ar_id2
! $tc f a dev $4 parent 1: protocol ip prio 2 u32 ht $ar_h3:$ar_h1: \
match ip protocol 6 0xff match u8 0x45 0xff at 0 match u16 0x0000 0xffc0 at 2 \
match u8 0x10 0xff at 33 flowid 1:$ar_id2
! $tc f a dev $4 parent 1: protocol ip prio 3 u32 ht $ar_h3:$ar_h1: \
match ip protocol 1 0xff flowid 1:$ar_id2
! $tc f a dev $4 parent 1: protocol ip prio 4 u32 ht $ar_h3:$ar_h1: match ip src $2 \
flowid 1:$ar_id1
}
! #set speed for rule $1 in table $2 with rate $3 kbit on device $4
setspeed() {
ss_id=$(($POOLWIDTH*($2+1)+$1))
***************
*** 86,99 ****
ss_id2=$(($RULECOUNT*2+$ss_id))
ss_hr=$(($3/2))
! $tc c r dev $UPDEV parent 1:1 classid 1:$ss_id htb rate ${3}kbit $UBURST prio 1 quantum 1514
! $tc c r dev $UPDEV parent 1:$ss_id classid 1:$ss_id1 htb rate ${ss_hr}kbit ceil ${3}kbit $UBURST prio 2 quantum 1514
! $tc c r dev $UPDEV parent 1:$ss_id classid 1:$ss_id2 htb rate ${ss_hr}kbit ceil ${3}kbit $UBURST prio 1 quantum 1514
}
! #fill table for subnet addr $1, number $2
addtable() {
nwidth=$(netwidth $1)
! $tc f a dev $UPDEV parent 1:1 prio 10 handle $tctr: protocol ip u32 divisor $nwidth
! $tc f a dev $UPDEV parent 1: protocol ip prio 10 u32 ht 800:: \
match ip src $(subnet $1) \
hashkey mask 0x$(hex $(($nwidth-1))) at 12 \
--- 86,99 ----
ss_id2=$(($RULECOUNT*2+$ss_id))
ss_hr=$(($3/2))
! $tc c r dev $4 parent 1:1 classid 1:$ss_id htb rate ${3}kbit $UBURST prio 1 quantum 1514
! $tc c r dev $4 parent 1:$ss_id classid 1:$ss_id1 htb rate ${ss_hr}kbit ceil ${3}kbit $UBURST prio 2 quantum 1514
! $tc c r dev $4 parent 1:$ss_id classid 1:$ss_id2 htb rate ${ss_hr}kbit ceil ${3}kbit $UBURST prio 1 quantum 1514
}
! #fill table for subnet addr $1, device $2
addtable() {
nwidth=$(netwidth $1)
! $tc f a dev $2 parent 1:1 prio 10 handle $tctr: protocol ip u32 divisor $nwidth
! $tc f a dev $2 parent 1: protocol ip prio 10 u32 ht 800:: \
match ip src $(subnet $1) \
hashkey mask 0x$(hex $(($nwidth-1))) at 12 \
***************
*** 101,105 ****
at_t=0
for at_i in $(lseq $(ip2int $1) $nwidth); do
! addrule $at_t $(int2ip $at_i) $tctr
at_t=$(($at_t+1))
done
--- 101,105 ----
at_t=0
for at_i in $(lseq $(ip2int $1) $nwidth); do
! addrule $at_t $(int2ip $at_i) $tctr $2
at_t=$(($at_t+1))
done
***************
*** 137,144 ****
case "$1" in
init)
! initdev
! for i in $NPOOLS; do
! addtable $i
! tctr=$(($tctr+1))
done;;
set)
--- 137,146 ----
case "$1" in
init)
! for iface in $UPDEVS; do
! initdev $iface
! for i in $NPOOLS; do
! addtable $i $iface
! tctr=$(($tctr+1))
! done
done;;
set)
***************
*** 146,150 ****
if [ $(chkip $i $2) -eq 1 ]; then
rulenum=$(($(ip2int $2)-$(ip2int $i)))
! setspeed $rulenum $tctr $3
exit 0
fi
--- 148,158 ----
if [ $(chkip $i $2) -eq 1 ]; then
rulenum=$(($(ip2int $2)-$(ip2int $i)))
! if [ -z "$4" ]; then
! for iface in $UPDEVS; do
! setspeed $rulenum $tctr $3 $iface
! done
! else
! setspeed $rulenum $tctr $3 $4
! fi
exit 0
fi
***************
*** 157,161 ****
if [ $(chkip $i $2) -eq 1 ]; then
cl1=$(($POOLWIDTH*($tctr+1)+$(ip2int $2)-$(ip2int $i)))
! $tc -s c s dev $UPDEV|grep -A 4 " 1:$cl1 "
exit 0
fi
--- 165,176 ----
if [ $(chkip $i $2) -eq 1 ]; then
cl1=$(($POOLWIDTH*($tctr+1)+$(ip2int $2)-$(ip2int $i)))
! if [ -z "$3" ]; then
! for iface in $UPDEVS; do
! echo "Interface $iface"
! $tc -s c s dev $iface|grep -A 4 " 1:$cl1 "
! done;
! else
! $tc -s c s dev $3|grep -A 4 " 1:$cl1 "
! fi
exit 0
fi
***************
*** 167,171 ****
echo $UPDEVSTOP|sh;;
*)
! echo Usage: "$0 (init|stop|set <ip> <speed in kbit>|cstat <ip>)";;
esac
--- 182,186 ----
echo $UPDEVSTOP|sh;;
*)
! echo Usage: "$0 (init|stop|set <ip> <speed in kbit> [iface]|cstat <ip> [iface])";;
esac
Index: hsh.conf
===================================================================
RCS file: /cvsroot/leaf/src/bering-uclibc4/source/hash-shaper/hsh.conf,v
retrieving revision 1.1.1.1
retrieving revision 1.2
diff -C2 -d -r1.1.1.1 -r1.2
*** hsh.conf 26 Apr 2010 09:02:43 -0000 1.1.1.1
--- hsh.conf 22 Nov 2010 18:12:42 -0000 1.2
***************
*** 5,15 ****
POOLS="10.255.0.64/30 10.255.0.0/28"
! UPDEV=ifb0
! UPDEVINIT="$ip l s $UPDEV up 2>/dev/null"
! UPDEVSTOP="$tc q d root dev $UPDEV 2>/dev/null; $ip l s $UPDEV down 2>/dev/null"
URATE=100Mbit
UHRATE=50Mbit
UCEIL=1000Mbit
! UBURST="burst 512k"
--- 5,16 ----
POOLS="10.255.0.64/30 10.255.0.0/28"
! UPDEVS="ifb0 ifb1"
! UPDEVINIT="$ip l s ifb0 up 2>/dev/null; $ip l s ifb1 up 2>/dev/null"
! UPDEVSTOP="$tc q d root dev ifb0 2>/dev/null; $ip l s ifb0 down 2>/dev/null; \
! $tc q d root dev ifb1 2>/dev/null; $ip l s ifb1 down 2>/dev/null"
URATE=100Mbit
UHRATE=50Mbit
UCEIL=1000Mbit
! UBURST="burst 1024k"
Index: buildtool.cfg
===================================================================
RCS file: /cvsroot/leaf/src/bering-uclibc4/source/hash-shaper/buildtool.cfg,v
retrieving revision 1.1.1.1
retrieving revision 1.2
diff -C2 -d -r1.1.1.1 -r1.2
*** buildtool.cfg 26 Apr 2010 09:02:43 -0000 1.1.1.1
--- buildtool.cfg 22 Nov 2010 18:12:42 -0000 1.2
***************
*** 26,31 ****
<Package>
<hsh>
! Version = 0.1
! Revision = 5
Help <<EOF
--- 26,31 ----
<Package>
<hsh>
! Version = 0.2
! Revision = 1
Help <<EOF
------------------------------------------------------------------------------
Increase Visibility of Your 3D Game App & Earn a Chance To Win $500!
Tap into the largest installed PC base & get more eyes on your game by
optimizing for Intel(R) Graphics Technology. Get started today with the
Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs.
http://p.sf.net/sfu/intelisp-dev2dev