Re: Recommend a small board to run LEAF?
Erich Titl <[email protected]> Wed, 26 Nov 2003 10:07:21 +0100
| Newsgroups | gmane.linux.leaf.hardware |
|---|---|
| Message-ID | <[email protected]> |
Steve At 07:16 07.10.2003 +1300, Steve Wright wrote: >... >box. You should be able to do something with that. ;-) > > >If you want something smaller, then there is the WRAP1A (google for it) >but you will have to box it, feed it, and you only get 3 ethernet, or >one ethernet and two miniPCI(good for wireless.) in an enclosure, boxing it may not be necessary and power could be applied= =20 using POE (not 802.3af compatible) Erich THINK P=FCntenstrasse 39 8143 Stallikon mailto:[email protected] PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16 ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/