Re: HPE driver
Andrew <[email protected]>
| Newsgroups | gmane.linux.leaf.user |
|---|---|
| Message-ID | <[email protected]> |
Maybe it's a Broadcom, and it requires bnx firmware... 14.10.2020 17:49, Erich Titl пишет: > Hi > > Am 14.10.2020 um 05:31 schrieb James Becker: >> Ok now I see that the interfaces are marked down in the ip addr I used a >> decent card and a 3com both of them were marked down. Despite having >> lights but they also both showed up in the ip addr command. Once I seen >> that the interfaces were down I was then able to make progress. I >> needed to edit the interfaces file a little bit more. I forgot to save >> in the menu. Distractions SUCK. They now show as up and I can ping but >> i still have issues with the 4 port cards. > So either the card is rotten or you are missing the driver. The driver > loading process is automatic and if this process does not find the card > then the driver must be missing (all this if the card is OK). Do you > have more information on that card than just HPE 1Gb. > > cheers > > ET > ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/