Re: LEAF for PC Engines APU1D Board
Bob von Knobloch <[email protected]>
| Newsgroups | gmane.linux.leaf.user |
|---|---|
| Message-ID | <[email protected]> |
On 13/05/2021 10:42, Bob von Knobloch wrote:
> On 12/05/2021 20:19, Jean-Roch Blais wrote:
>> If you ever have the time and feel like it, could you elaborate what
>> you did or didn’t, so we might improve the doc. based on your experience…
>
> Will try Jean-Roch, but first on Monday (Holiday here).
> Bob
>
OK Jean-Roch,
I booted your image on a USB stick and installed from the lrcfg menu to
an SD card.
The USB was seen as /dev/sda and the SD as /dev/sdb.
After removing the USB stick and power cycling:
=============================================================================0
-- PC Engines APU BIOS build date: Sep 8 2014
Total memory 2048 MB
AMD G-T40E Processor
CPU MHz=1000
USB MSC blksize=512 sectors=7802880
Press F10 key now for boot menu:
drive 0x000f2ab0: PCHS=0/0/0 translation=lba LCHS=967/128/63 s=7802880
Booting from Hard Disk...
SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
SYSLINUX 6.03 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
e
┌──────────────────────────────────────────────────────────┐
│ Welcome to LEAF Bering uClibc │
├──────────────────────────────────────────────────────────┤
│ Boot LEAF Bering-uClibc from primary partition │
│ Boot LEAF Bering-uClibc from backup partition │
│ Hardware Test │
│ Memtest │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└──────────────────────────────────────────────────────────┘
Press [Tab] to edit options
e
Automatic boot
=============================================================================
Allowing it to boot from primary:
=============================================================================
Booting...
SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
[ 0.001748] do_IRQ: 1.55 No irq handler for vector
LINUXRC: Bering - Initrd - 7.0.1 Rev 1 uClibc 1.0.35
LINUXRC: Parsing kernel command line...
LINUXRC: Looking for leaf.cfg...
LINUXRC: Sourcing leaf.cfg from /dev/sda2
LINUXRC: Generating default dirs...
LINUXRC: generated /dev/inet
LINUXRC: generated /dev/net
LINUXRC: generated /tmp
LINUXRC: generated /mnt
LINUXRC: generated /nfs
LINUXRC: generated /var/lock
LINUXRC: generated /var/run
LINUXRC: generated /dev/pts
LINUXRC: Creating /tmp & /var/log partitions ...
LINUXRC: identified device UUID=851c57f7-f1f5-453f-8273-dd39f36ed73f
LINUXRC: LRP= is empty or unset. Can not install packages.
LINUXRC: Mounting squashfs with modules...
LINUXRC: found modules.sqfs on /mnt1
[ 9.438736] /dev/loop0: Can't open blockdev
LINUXRC: loading modules from /etc/modules
sed: /etc/modules: No such file or directory
LINUXRC: chown and chmod /dev...
LINUXRC: Unmounting /mnt1
LINUXRC: Removing /mnt1
LINUXRC: Loaded Packages
LINUXRC: Creating new rootfs...
LINUXRC: Switch_root into new rootfs...
can't run '/etc/init.d/rcS': No such file or directory
Please press Enter to activate this console.ngpartion:
=============================================================================
Looking at the sd I seethat LEAF files have been created on sda2 & sda3,
but the system appears to have mounted sda1 as root which only has
syslinux on it. (/etc/ has only config.cfg and no linux files in it)
Suggestions?
Cheers,
Bob
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/