Re: [leaf-wisp] netcs2 essid problem

Ray, that's exactly what I'm doing.
Actually more fixup is needed so I run the following lines:

/sbin/iwconfig netcs1 txpower 23dB channel 6
/sbin/iwconfig netcs2 txpower 23dB ESSID amb3 channel 11
/sbin/ip addr add 10.4.4.1/24 dev netcs2
/etc/network/ifup netcs2
/etc/init.d/dhcpd restart

Anyway Vladimir suggested a bug is out there that could cause the problem and I 
prefer to fix the bug (in case it exists).
He also suggested a race condition could exists but I could not find anything in 
that direction.

abel

On Sat, 06 Mar 2004 23:18:03 -0500, Ray Gwinn wrote
> Able, a kludge to work around the Wisp-Disp essid problem with three radios is 
to set the 
> essid of netcs2 in rc.local, ie: 
> 
> /sbin/iwconfig netcs2 essid my_essid 
> 
> I have not done a lot of testing, but it worked okay in a few tests.  The 
"test" essid may 
> show up on a wireless users system just after Wisp-Dist boots, but it goes 
away in about 
> 30 seconds. 
> 
> Ray
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> leaf-wisp-dist mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist






-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click