Re: [leaf-wisp] Still having problems with routing

Gerry Weaver said:
> Hi,
>
> I've been having a lot of routing problems with wisp-dist lately, so I
> tried
> to setup a very simple config. I set up a Cisco router and a wisp-dist cpe
> with the following I've got both wired and wireless access to the
> 67.65.229.0 network.
>
> # ip route
> 192.168.1.0/24 dev eth0  proto kernel  scope link  src 192.168.1.254
> 67.65.229.0/24 dev netcs0  proto kernel  scope link  src 67.65.229.11
> default via 67.65.229.254 dev netcs0
>
> client-pc <==> wisp-cpe <==> AirPointPro <==> router
Did you set your IP Masq for the Private IP Range? I would guess that is
your problem.

Jim TerWee

> I can ping everything from the wisp-dist box itself and only the
> cpe(192.168.1.254) from the client pc.
>
>
> This config worked fine on the Cisco, but does not work on the wisp-dist
> box. Is there something that I'm missing on Linux / wisp-dist?
>
> Thanks,
> Gerry
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.576 / Virus Database: 365 - Release Date: 1/30/2004
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> leaf-wisp-dist mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
>



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click