Re: [leaf-wisp] Zebra Question

Thank you for the quick answer.

What about ospfd.conf?  Does ospfd also work with the default ospf.conf, automatically 
building dynamic routing? Or must I setup appropriate area 0 and so on?

Ray

On 19 Mar 2004 at 19:28, Vladimir Ivaschenko wrote:

> Ray Gwinn wrote:
> > Does anyone know if it is necessary to specify the IP addresses of
> > interfaces in zebra.conf.
> 
> No. Basicly the default configuration files will start working 
> immediately as soon as you enable Zebra.
> 
> > I see many examples with only the interface named and no IP address.  For
> > example:
> > 
> > interface eth0
> > 
> > I am wondering if zebra will automatically obtain the IP address for a given
> > interface.
> 
> Yes.
> 
> > 
> > Ray
> > 
> > 
> > 
> > -------------------------------------------------------
> > This SF.Net email is sponsored by: IBM Linux Tutorials
> > Free Linux tutorial presented by Daniel Robbins, President and CEO of
> > GenToo technologies. Learn everything from fundamentals to system
> > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> > _______________________________________________
> > leaf-wisp-dist mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> > 
> 
> 
> -- 
> Best Regards,
> Vladimir Ivashchenko
> ThunderWorx - www.thunderworx.com
> Senior Systems Designer/Engineer
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> leaf-wisp-dist mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click