Re: [leaf-wisp] sbni network cards

Hi,

Strange, WISP-Dist uses more or less standard Linux kernel. I don't 
see why there would be a difference with Debian.

Try latest version of WISP-Dist image with 2.4.25 kernel - 
http://www.hazard.maks.net/wisp-dist/downloads/

Dmytro M. Budashnyi wrote:
> Hi
> I am trying to use wisp-dist with sbni12-11. But here is a small
> problem with kernel module for this card.
> 
> $modprobe sbni
> Granch SBNI12 driver ver 5.0.1  Jun 22 2001  Denis I.Timofeev.
> sbni0: ioaddr 0x2c0, irq 7, MAC: 00:ff:01:33:17:70
> sbni0: speed 2000000, receive level (auto)
> 
> It's look like everything is allright, but after configuring sbni0
> and trying out to ping interface on the other side of the cable,
> I see a lot of strings "Can't get IRQ for device sbni0" on my tty.
> 
> First I thought that this was a hardware conflict, but after trying other
> IRQs and 2.4.20 kernel from Debian distribution, I understood, that
> problem is only in sbni module.
> 
> Also I saw nothing at /proc/interrupts  :(
> 
> PS: I'm using wisp-2624 with 2.4.20 kernel
> 


-- 
Best Regards,
Vladimir Ivashchenko
ThunderWorx - www.thunderworx.com
Senior Systems Designer/Engineer



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click