Re: [leaf-wisp] Wireless
Vladimir Ivaschenko <[email protected]>
| Newsgroups | gmane.linux.leaf.wisp-dist |
|---|---|
| Message-ID | <[email protected]> |
I don't think it is the card. Most probably there is interrupt problem with your Ricoh. Please send me output of /proc/interrupts Andy Henckel wrote: > Indeed... I have build Karlnet Flashrom units before, and I used the parts from one I hadn't put together. > > So I think it is a Richo based one. > It finds the card just fine.. but doesn't bring up the AP properly. > I am using the partition based installation 2426. > I tried one from your site.. 1.3.1p26 but it seems to have some differences. 1.3.1p26 would tell me a TX error all the time. > /start > root: ifup: Bringing up interface netcs0 x > x cardmgr[2000]: socket 0: Zcomax XI-325H 200mW x > x cardmgr[2000]: executing: 'modprobe hostap_crypt' x > x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory x > x kernel: hostap_crypt: registered algorithm 'NULL' x > x cardmgr[2000]: + Using /modules/hostap_crypt.o x > x cardmgr[2000]: executing: 'modprobe hostap_crypt_wep' x > x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory x > x kernel: hostap_crypt: registered algorithm 'WEP' x > x cardmgr[2000]: + Using /modules/hostap_crypt_wep.o x > x cardmgr[2000]: executing: 'modprobe hostap' x > x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory x > x cardmgr[2000]: + Using /modules/hostap.o x > x cardmgr[2000]: executing: 'modprobe hostap_cs' x > x cardmgr[2000]: + insmod: /lib/modules/2.4.20: No such file or directory > kernel: hostap_cs: hostap_cs.c 0.0.0 2002-05-16 (SSH Communications Secu x > x kernel: hostap_cs: (c) SSH Communications Security Corp <[email protected]> x > x cardmgr[2000]: + Using /modules/preferred/pcmcia/hostap_cs.o x > x kernel: hostap_cs: setting Vcc=33 (constant) x > x kernel: hostap_cs: CS_EVENT_CARD_INSERTION x > x kernel: prism2_config() x > x kernel: hostap_cs: setting Vcc=50 (from config) x > x kernel: CISTPL_MANFID: 0xd601, 0x0005 x > x kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) x > x kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 x > x kernel: io->flags = 0x0046, io.base=0x0000, len=64 x > x kernel: hostap_cs: index 0x01: Vcc 5.0, irq 7, io 0x0100-0x013f x > x kernel: hostap_cs: Registered netdevice netcs0 x > x kernel: prism2_hw_init() x > x kernel: prism2_hw_config: initialized in 17306 iterations x > x kernel: netcs0: NIC: id=0x800c v1.0.0 > kernel: netcs0: PRI: id=0x15 v1.1.1 x > x kernel: netcs0: STA: id=0x1f v1.5.6 x > x cardmgr[2000]: executing: './network start netcs0 0' x > x cardmgr[2000]: + iwconfig netcs0 mode MASTER x > x cardmgr[2000]: + iwconfig netcs0 channel 1 x > x cardmgr[2000]: + [: auto: unexpected operator x > x cardmgr[2000]: + iwconfig netcs0 key OFF x > x cardmgr[2000]: + iwconfig netcs0 essid "ZCASA-DIST" x > x cardmgr[2000]: + iwconfig netcs0 nick "ZCASA-WISPDIST" x > x cardmgr[2000]: + iwpriv netcs0 maccmd 0 x > x cardmgr[2000]: + iwpriv netcs0 maccmd 4 x > x kernel: netcs0: Deauthenticate all stations x > x root: ifup: Bringing up interface netcs0 x > x kernel: netcs0: prism2_open > > > Then after a little while it does this.. > > kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x > x kernel: hfa384x_cmd: timeout on waiting pending TX x > x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x > x kernel: CNFWEPFLAGS reading failed x > x kernel: hfa384x_cmd: timeout on waiting pending TX x > x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x > x kernel: hfa384x_cmd: timeout on waiting pending TX x > x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x > x kernel: hfa384x_cmd: timeout on waiting pending TX x > x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x > x kernel: hfa384x_cmd: timeout on waiting pending TX x > x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x > x kernel: hfa384x_cmd: timeout on waiting pending TX x > x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) x > x kernel: hfa384x_cmd: timeout on waiting pending TX x > x kernel: netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110) > > What do you think? > > You could access the unit if you like... 64.25.142.172 > root > > I'll try swaping cards again. I have tried all 3 different firmware revisions for the card. > > Thanks so much, > > Andy > ________________________________ > > From: Vladimir Ivaschenko [mailto:[email protected]] > Sent: Tue 5/18/2004 3:18 AM > To: Andy Henckel > Cc: [email protected] > Subject: Re: [leaf-wisp] Wireless > > > > I use WISP-Dist myself with Demarctech cards and they used to work fine. > > You use somekind of PCMCIA-PCI adapter? > > Andy Henckel wrote: > >>Hello, >> >>I setup wispdist on a pII350 that I had laying around the basement this weekend. >>After grinding away for some time, I finally got everything into place... or at least the illusion thereof. >> >>My problem is this: I have Demarctech card. And it won't work. >>I tried orinoco card.. but AP mode is unsupported? >> >>After reading the wireless thread on the list archive, I upgraded the 1.4.9 station firmware to 1.5.6 >>(primary 1.0.1 to 1.1.1) >> >>And it still won't work. I will try to upgrade to 1.7.4 or downgrade back to 1.5.6 with primary of 1.0.1. >> >>Any suggestions? >> >>What happens is very strange. I reboot the dist, and then with my laptop, I can see the network when I scan for AP's. As soon as I try to connect to the AP, I cannot. And then it disappears alltogether, until another reboot. >>Although it's not like the dist is locking up or anything. >> >>Thanks in advance. >> >>Andy Henckel >>Transaria >>Missoula, MT. >> >> >> >>------------------------------------------------------- >>This SF.Net email is sponsored by: SourceForge.net Broadband >>Sign-up now for SourceForge Broadband and get the fastest >>6.0/768 connection for only $19.95/mo for the first 3 months! >>http://ads.osdn.com/?ad_id%62&alloc_ida84&op=click >>_______________________________________________ >>leaf-wisp-dist mailing list >>[email protected] >>https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist >> > > > > -- > Best Regards, > Vladimir Ivashchenko > ThunderWorx - www.thunderworx.com > Senior Systems Designer/Engineer > > > > -- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click