Re: [leaf-wisp] Wireless
Vladimir Ivaschenko <[email protected]>
| Newsgroups | gmane.linux.leaf.wisp-dist |
|---|---|
| Message-ID | <[email protected]> |
Put the following in /etc/default/pcmcia file: PCIC_OPTS="irq_mode=0 pci_csc=0 poll_interval=100" or, if it doesn't help, PCIC_OPTS="irq_list=0" I would also like to have output of "cat /proc/pci" command so that I may integrate workaround for your PCMCIA bridge in future releases of WISP-Dist. Andy Henckel wrote: > Search for what ? PCIC? > > > -----Original Message----- > From: Vladimir Ivaschenko [mailto:[email protected]] > Sent: Monday, May 24, 2004 10:42 AM > To: Andy Henckel > Cc: [email protected] > Subject: Re: [leaf-wisp] Wireless > > Ok, the controller does not pass interrupts properly. > > Search in the list, there was discussion about this - you need to put > correct PCIC_OPTS parameter. > > Andy Henckel wrote: > >># cat /proc/interrupts >> CPU0 >> 0: 14857399 XT-PIC timer >> 1: 3 XT-PIC keyboard >> 2: 0 XT-PIC cascade >> 4: 0 XT-PIC i82365 >> 5: 0 XT-PIC hostap_cs >> 10: 10340 XT-PIC eth0 >> 14: 7153 XT-PIC ide0 >>NMI: 0 >>ERR: 0 >> >> >>________________________________ >> >>From: Vladimir Ivaschenko [mailto:[email protected]] >>Sent: Sun 5/23/2004 5:11 AM >>To: Andy Henckel >>Cc: [email protected] >>Subject: Re: [leaf-wisp] Wireless >> >> >> >>Hi, >> >>You can see /proc/interrupts by issuing command "cat /proc/interrupts". >> >>Andy Henckel wrote: >> >> >>>Hmm.. not quite sure how to access /proc/interrupts.. I am really a linux newb. >> >> >>-- >>Best Regards, >>Vladimir Ivashchenko >>ThunderWorx - www.thunderworx.com >>Senior Systems Designer/Engineer >> >> >> >> > > > -- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click