Re: [leaf-wisp] Zebra/ospf

Hi Ray,

Please do "show ip ospf neigh" command in ospfd command line. It will 
show if there are any adjacencies.

Also "deb ip ospf hello" might be useful - you should see that there 
are HELLOs received from the remote side.

Ray Gwinn wrote:
>>Note that if OSPF is working you will have routes with "proto zebra" in the list.
> 
> 
> Is the above true when no other nodes are visible for zebra to route to?  On a test bench 
> system, it always shows "proto kernel".  Again, there are no other nodes visible to my test 
> bench node.
> 
> Using ps, I see that both zebra and ospfd are running.
> 
> The zebra log is empty.  The ospfd log is below.  Does this look normal to you?
> 
> Ray
> 
> 2004/06/09 00:20:31 OSPF: ASBR[Status:1]: Update
> 2004/06/09 00:20:31 OSPF: ASBR[Status:2]: Update
> 2004/06/09 00:20:31 OSPF: ASBR[Status:2]: Already ASBR
> 2004/06/09 00:20:31 OSPF: interface 10.0.100.1 join AllSPFRouters Multicast group.
> 2004/06/09 00:20:31 OSPF: interface 199.110.204.253 join AllSPFRouters Multicast 
> group.
> 2004/06/09 00:20:32 OSPF: LSA: AS-external-LSA was not originated.
> 2004/06/09 00:20:32 OSPF: LSA: AS-external-LSA was not originated.
> 2004/06/09 00:21:11 OSPF: DR-Election[1st]: Backup 10.0.100.1
> 2004/06/09 00:21:11 OSPF: DR-Election[1st]: DR     10.0.100.1
> 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: Backup 0.0.0.0
> 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: DR     10.0.100.1
> 2004/06/09 00:21:11 OSPF: interface 10.0.100.1 join AllDRouters Multicast group.
> 2004/06/09 00:21:11 OSPF: DR-Election[1st]: Backup 199.110.204.253
> 2004/06/09 00:21:11 OSPF: DR-Election[1st]: DR     199.110.204.253
> 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: Backup 0.0.0.0
> 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: DR     199.110.204.253
> 2004/06/09 00:21:11 OSPF: interface 199.110.204.253 join AllDRouters Multicast group.
> 
> 
> On 13 Jun 2004 at 14:38, Vladimir Ivaschenko wrote:
> 
> 
>>OSPF routing should work by default.
>>
>>Make sure that OSPF key is the same on both nodes, and check that 
>>routing tables are correct by doing "ip route". Note that if OSPF is 
>>working you will have routes with "proto zebra" in the list.
>>
>>Ray Gwinn wrote:
>>
>>>Vladimir, I have one wisp-disp node up and running fine.  This node has an
>>>internet feed via eth0.  All hardware is Soekris 4521.
>>>
>>>I have now up a second node.  This second node is wireless only.  That is,
>>>the second node's internet feed is one of the radios connected to a small
>>>beam pointing at the first (working) node.  User's can associate with the
>>>second node, but there seems to be a routing problem.
>>>
>>>My question is, should the default wisp-disp zebra/ospf configs work on both
>>>nodes? If not, can you provide any clues about configuring zebra/ospf for
>>>the two nodes?
>>>
>>>Ray
>>>
>>>
>>>
>>>-------------------------------------------------------
>>>This SF.Net email is sponsored by the new InstallShield X.
>>>>From Windows to Linux, servers to mobile, InstallShield X is the
>>>one installation-authoring solution that does it all. Learn more and
>>>evaluate today! http://www.installshield.com/Dev2Dev/0504
>>>_______________________________________________
>>>leaf-wisp-dist mailing list
>>>[email protected]
>>>https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
>>>
>>
>>
>>-- 
>>Best Regards,
>>Vladimir Ivashchenko
>>ThunderWorx - www.thunderworx.com
>>Senior Systems Designer/Engineer
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by the new InstallShield X.
>>From Windows to Linux, servers to mobile, InstallShield X is the
> one installation-authoring solution that does it all. Learn more and
> evaluate today! http://www.installshield.com/Dev2Dev/0504
> _______________________________________________
> leaf-wisp-dist mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> 


-- 
Best Regards,
Vladimir Ivashchenko
ThunderWorx - www.thunderworx.com
Senior Systems Designer/Engineer



-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504