Re: [leaf-wisp] Zebra/ospf

"Ray Gwinn" <[email protected]>
Newsgroups gmane.linux.leaf.wisp-dist
Organization EDCC
Message-ID <40CDA9CA.5733.27D48@localhost>
Dumb question. What port does ospfd listen on.  I cannot seem to find it anywhere.

Ray

On 14 Jun 2004 at 14:26, Vladimir Ivaschenko wrote:

> Hi Ray,
> 
> Please do "show ip ospf neigh" command in ospfd command line. It will 
> show if there are any adjacencies.
> 
> Also "deb ip ospf hello" might be useful - you should see that there 
> are HELLOs received from the remote side.
> 
> Ray Gwinn wrote:
> >>Note that if OSPF is working you will have routes with "proto zebra" in the
> >>list.
> > 
> > 
> > Is the above true when no other nodes are visible for zebra to route to?  On
> > a test bench system, it always shows "proto kernel".  Again, there are no
> > other nodes visible to my test bench node.
> > 
> > Using ps, I see that both zebra and ospfd are running.
> > 
> > The zebra log is empty.  The ospfd log is below.  Does this look normal to
> > you?
> > 
> > Ray
> > 
> > 2004/06/09 00:20:31 OSPF: ASBR[Status:1]: Update
> > 2004/06/09 00:20:31 OSPF: ASBR[Status:2]: Update
> > 2004/06/09 00:20:31 OSPF: ASBR[Status:2]: Already ASBR
> > 2004/06/09 00:20:31 OSPF: interface 10.0.100.1 join AllSPFRouters Multicast
> > group. 2004/06/09 00:20:31 OSPF: interface 199.110.204.253 join
> > AllSPFRouters Multicast group. 2004/06/09 00:20:32 OSPF: LSA:
> > AS-external-LSA was not originated. 2004/06/09 00:20:32 OSPF: LSA:
> > AS-external-LSA was not originated. 2004/06/09 00:21:11 OSPF:
> > DR-Election[1st]: Backup 10.0.100.1 2004/06/09 00:21:11 OSPF:
> > DR-Election[1st]: DR     10.0.100.1 2004/06/09 00:21:11 OSPF:
> > DR-Election[2nd]: Backup 0.0.0.0 2004/06/09 00:21:11 OSPF: DR-Election[2nd]:
> > DR     10.0.100.1 2004/06/09 00:21:11 OSPF: interface 10.0.100.1 join
> > AllDRouters Multicast group. 2004/06/09 00:21:11 OSPF: DR-Election[1st]:
> > Backup 199.110.204.253 2004/06/09 00:21:11 OSPF: DR-Election[1st]: DR    
> > 199.110.204.253 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: Backup 0.0.0.0
> > 2004/06/09 00:21:11 OSPF: DR-Election[2nd]: DR     199.110.204.253
> > 2004/06/09 00:21:11 OSPF: interface 199.110.204.253 join AllDRouters
> > Multicast group.
> > 
> > 
> > On 13 Jun 2004 at 14:38, Vladimir Ivaschenko wrote:
> > 
> > 
> >>OSPF routing should work by default.
> >>
> >>Make sure that OSPF key is the same on both nodes, and check that 
> >>routing tables are correct by doing "ip route". Note that if OSPF is 
> >>working you will have routes with "proto zebra" in the list.
> >>
> >>Ray Gwinn wrote:
> >>
> >>>Vladimir, I have one wisp-disp node up and running fine.  This node has an
> >>>internet feed via eth0.  All hardware is Soekris 4521.
> >>>
> >>>I have now up a second node.  This second node is wireless only.  That is,
> >>>the second node's internet feed is one of the radios connected to a small
> >>>beam pointing at the first (working) node.  User's can associate with the
> >>>second node, but there seems to be a routing problem.
> >>>
> >>>My question is, should the default wisp-disp zebra/ospf configs work on
> >>>both nodes? If not, can you provide any clues about configuring zebra/ospf
> >>>for the two nodes?
> >>>
> >>>Ray
> >>>
> >>>
> >>>
> >>>-------------------------------------------------------
> >>>This SF.Net email is sponsored by the new InstallShield X.
> >>>>From Windows to Linux, servers to mobile, InstallShield X is the
> >>>one installation-authoring solution that does it all. Learn more and
> >>>evaluate today! http://www.installshield.com/Dev2Dev/0504
> >>>_______________________________________________
> >>>leaf-wisp-dist mailing list
> >>>[email protected]
> >>>https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> >>>
> >>
> >>
> >>-- 
> >>Best Regards,
> >>Vladimir Ivashchenko
> >>ThunderWorx - www.thunderworx.com
> >>Senior Systems Designer/Engineer
> > 
> > 
> > 
> > 
> > 
> > -------------------------------------------------------
> > This SF.Net email is sponsored by the new InstallShield X.
> >>From Windows to Linux, servers to mobile, InstallShield X is the
> > one installation-authoring solution that does it all. Learn more and
> > evaluate today! http://www.installshield.com/Dev2Dev/0504
> > _______________________________________________
> > leaf-wisp-dist mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> > 
> 
> 
> -- 
> Best Regards,
> Vladimir Ivashchenko
> ThunderWorx - www.thunderworx.com
> Senior Systems Designer/Engineer
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by the new InstallShield X.
> >From Windows to Linux, servers to mobile, InstallShield X is the
> one installation-authoring solution that does it all. Learn more and
> evaluate today! http://www.installshield.com/Dev2Dev/0504
> _______________________________________________
> leaf-wisp-dist mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist




-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.