Re: [leaf-wisp] SparkLan WL-616R Prism 3.0 cards

I can see two reasons, incompatible firmware or IRQ routing problem.

I recommend firmware 1.5.6, and in order to check IRQ routing, please 
send results of /proc/interrupts. Search mailing list archives for 
further info.

Fernando Benaiter - Micromatix wrote:
> Vladimir, i try with last available Wisp version (wisp-dist_1.3.1p30_img).
> Now the card mac address appears but they still dont work...  iwconfig
> output returns some errors:
> 
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> CNFWEPFLAGS reading failed
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110)
> netcs0    IEEE 802.11-DS  ESSID:"SPARKLAN"
>           Mode:Master  Tx-Power=15 dBm
>           Link Quality:0  Signal level:0  Noise level:0
>           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>           Tx excessive retries:0  Invalid misc:0   Missed beacon:0
> 
> The card appears link Master, but icant detect this access point.
> 
> The system returns some other error too:
> 
> INIT Id "T1" respawning too fast: disabled for 5 minutes
> 
> What is this message?
> 
> 
> ----- Original Message ----- 
> From: "Fernando Benaiter - Micromatix" <[email protected]>
> To: "Vladimir Ivaschenko" <[email protected]>
> Cc: <[email protected]>
> Sent: Saturday, August 28, 2004 1:36 PM
> Subject: Re: [leaf-wisp] SparkLan WL-616R Prism 3.0 cards
> 
> 
> Ok, i'll download and try right now. Thanks.
> 
> ----- Original Message ----- 
> From: "Vladimir Ivaschenko" <[email protected]>
> To: "Fernando Benaiter - Micromatix" <[email protected]>
> Cc: <[email protected]>
> Sent: Saturday, August 28, 2004 1:05 PM
> Subject: Re: [leaf-wisp] SparkLan WL-616R Prism 3.0 cards
> 
> 
> Ah, so that's the problem. Please use the latest image from
> http://www.hazard.maks.net/wisp-dist/downloads/
> 
> Fernando Benaiter - Micromatix wrote:
> 
>>2003-12-22 (2634)
>>
>>----- Original Message ----- 
>>From: "Vladimir Ivaschenko" <[email protected]>
>>To: "Fernando Benaiter - Micromatix" <[email protected]>
>>Cc: <[email protected]>
>>Sent: Saturday, August 28, 2004 11:32 AM
>>Subject: Re: [leaf-wisp] SparkLan WL-616R Prism 3.0 cards
>>
>>
>>What is the version of wisp-dist that you're using?
>>
>>Fernando Benaiter - Micromatix wrote:
>>
>>
>>>iwconfig returns "no wireless extensions" to all interfaces. And netcs0
>>
>>dont
>>
>>
>>>appears...
>>>
>>>----- Original Message ----- 
>>>From: "Vladimir Ivaschenko" <[email protected]>
>>>To: "Fernando Benaiter - Micromatix" <[email protected]>;
>>><[email protected]>
>>>Sent: Friday, August 27, 2004 12:21 PM
>>>Subject: Re: [leaf-wisp] SparkLan WL-616R Prism 3.0 cards
>>>
>>>
>>>>From what I see this card should be recognized - it is the same as
>>>Mikrotik.
>>>
>>>Can you send output of "iwconfig"?
>>>
>>>Fernando Benaiter - Micromatix wrote:
>>>
>>>
>>>
>>>>Vladimir, based on cardctl ident output, how i made the correct
>>>
>>>description
>>>
>>>
>>>
>>>>of this card in hotsap_cs.conf?
>>>>
>>>>----- Original Message ----- 
>>>>From: "Fernando Benaiter - Micromatix" <[email protected]>
>>>>To: "Vladimir Ivaschenko" <[email protected]>
>>>>Cc: <[email protected]>
>>>>Sent: Wednesday, August 25, 2004 9:12 AM
>>>>Subject: Re: [leaf-wisp] SparkLan WL-616R Prism 3.0 cards
>>>>
>>>>
>>>># cardctl ident
>>>>Socket 0:
>>>>product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", ""
>>>>manfid: 0x0156, 0x0002
>>>>function: 6 (network)
>>>>
>>>>----- Original Message ----- 
>>>>From: "Vladimir Ivaschenko" <[email protected]>
>>>>To: "Fernando Benaiter - Micromatix" <[email protected]>
>>>>Cc: <[email protected]>
>>>>Sent: Wednesday, August 25, 2004 7:12 AM
>>>>Subject: Re: [leaf-wisp] SparkLan WL-616R Prism 3.0 cards
>>>>
>>>>
>>>>Probably /etc/pcmcia/hostap_cs.conf needs to be updated to include IDs
>>>>for this card.
>>>>
>>>>Please send me output of "cardctl ident"
>>>>
>>>>Fernando Benaiter - Micromatix wrote:
>>>>
>>>>
>>>>
>>>>
>>>>>I have one SparkLan WL-616R Prism 3.0 100 mW PCMCIA card. At first time
>>>>>Wisp-Dist doesnt detect this card (the mac address is not identified).
>>>>
>>How
>>
>>
>>>>>can i set the distribution to see this card?
>>>>>
>>>>>Fernando Benaiter
>>>>>Brazil
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>-------------------------------------------------------
>>>>>SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
>>>>>100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
>>>>>Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
>>>>>http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
>>>>>_______________________________________________
>>>>>leaf-wisp-dist mailing list
>>>>>[email protected]
>>>>>https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
>>>>>
>>>>
>>>>
>>>>
>>
> 
> 


-- 
Best Regards,
Vladimir Ivashchenko
ThunderWorx - www.thunderworx.com
Senior Systems Designer/Engineer



-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click