Re: Building kernel-5.18.8
| Newsgroups | gmane.linux.lfs.automated |
|---|---|
| Message-ID | <[email protected]> |
On 02/07/2022 04:06, Ken Moffat ([email protected] via alfs-discuss Mailing List) wrote: > On Sat, Jul 02, 2022 at 12:20:38AM +0200, Dragan wrote: >> On 01/07/2022 17:19, Ken Moffat ([email protected] via alfs-discuss >> Mailing List) wrote: >>> On Fri, Jul 01, 2022 at 03:07:12PM +0200, Dragan wrote: >>>> Hi, >>>> >>>> I have just finished build of r11.1-145 - see attached report - and logged >>>> in system in VM. >>>> >>>> Build have gone without problems up to kernel-5.18.8. After approximately 65 >>>> I have killed build as previous experience have learned shown that under >>>> such circumstances (new kernel version) even build of kernel have not >>>> finished!) >>>> >>>> In source directory I have run make defconfig and make menuconfig and >>>> restarted build after exiting chroot and saving .confing for future use. >>>> >>>> Within 2 minutes kernel build have finished. >>>> >>> You have told us how you successfully built the new kernel, but not >>> how you ran the build which apparently failed. >> I have used the same jhalfs settings - see report - for the second reported >> build and in the first run when manually I have not first run make proper. >> >> Build was started in totally clean lfs directory. >> >>> What commands did you use ? >> Make in jhalfs my own fstab and old .config from manual build few dev >> versions ago 5. 18. x . Always newly extracted source tree: make proper , >> make defconfig, make menu config. In menu config I have only changed options >> to follow the book and all other options are default. >> > All I'm concerned about is your problem with compiling the kernel. > I was interested in the commands you used for the kernel, so your > use of your own fstab is not relevant for that, and nor are your > general log results. > > BUT - you say you used an old .config from a manual build a few days > ago of a previous 5.18 kernel ? In that case, you do NOT want make > defconfig or menuconfig, what you need to do is make oldconfig and > answer the questions. After that, if you are uncertain about the > answers you gave to those questions, or want to change something > else, then by all means run make menuconfig. > > Running make defconfig will create a new .config based on random > past choices by Linus and other kernel developers, and overwrite any > existing .config. > > And you still have not explained what was going wrong - I've > interpreted your initial post as the build taking 65 minutes (I > think you said just 65) instead of 2 minutes. If the kernel build > is not showing output (I've only ever manually built kernels when > I've used jhalfs) then open another term on the host, chroot in > that, and either run top to see what is happening, tail any log if > the build is being logged, and generally look for evidence of what > is happening or has happened (perhaps even look at the system log in > chroot in case of an oops or oom). > >>> Was it a freshly extracted directory ? >> I just dont know: Is jhalfs optimizing build by extracting Linux kernel >> files just once? > My memory of jhalfs is that it will remove the build directory and > then re-extract, but I mainly used it for BLFS. > >>> My general recommendation to update the kernel, if you have a >>> working kernel config for the LFS system on that real machine or in >>> that VM is: >>> >>> 1. Use fresh source. >>> >>> 2. Copy your .config (for me, zcat /proc/config.gz >.config) >>> >>> 3. make oldconfig. >> I have just done that with .config from previous version and somehow it's >> have not worked. >>>> After cleaning up lfs directory and starting fresh build with current >>>> .config file build have finished as expected. Attached report file is from >>>> second build. >>>> >>>> I do believe, based on my experience that building kernel in VM using old >>>> .config (from previous versions of Linux kernel) can be quite >>>> counterproductive. >>>> >>>> Dragan >>>> >>> Using a .config from a successful build of LFS on the same machine, >>> with 'make oldconfig' should always be straightforward IF the kernel >>> source is fresh, although you will of course have to answer >>> questions about new options in a new kernel version. >>> ĸen >> Please see answers by Ken points above. I have attached report again. >> >> I will make some more test and post reply here. >> >> Dragan > I can see that your successful build is at the end of these long > results, but man, it is big! (76 MB of installed files). > > ĸen > >> vr 1 jul 2022 13:28:35 CEST >> >> Book version is: r11.1-145 >> >> >> jhalfs configuration settings: >> >> COMMIT <trunk> >> BOOK </lfs/jhalfs/book-source> >> CUSTOM_TOOLS <n> >> INITSYS <sysv> >> BLFS_TOOL <n> >> LUSER <lfs> >> LGROUP <lfs> >> LHOME </home> >> BUILDDIR </lfs> >> CLEAN <n> >> GETPKG <y> >> SRC_ARCHIVE </sources/sources> >> SERVER <http://ftp.osuosl.org> >> RETRYSRCDOWNLOAD <y> >> RETRYDOWNLOADCNT <2> >> DOWNLOADTIMEOUT <30> >> RUNMAKE <y> >> TEST <0> >> STRIP <y> >> NCURSES5 <n> >> DEL_LA_FILES <y> >> FSTAB </sources/script/fstab> >> CONFIG </sources/script/.config> >> TIMEZONE <Amsterdam> >> PAGE <A4> >> LANG <en_US.UTF-8> >> INSTALL_LOG <y> >> PKGMNGT <n> >> FULL_LOCALE <y> >> WRAP_INSTALL <n> >> HOSTNAME <draconian> >> INTERFACE <enp0s3> >> IP_ADDR <10.0.2.15> >> GATEWAY <10.0.2.2> >> PREFIX <24> >> BROADCAST <10.0.2.255> >> DOMAIN <local> >> DNS1 <8.8.8.8> >> DNS2 <4.4.4.4> >> FONT <lat0-16> >> KEYMAP <us> >> LOCAL <n> >> LOG_LEVEL <4> >> COMPARE <n> >> OPTIMIZE <2> >> N_PARALLEL <16> >> REALSBU <n> >> SAVE_CH5 <n> >> REPORT <y> >> REBUILD_MAKEFILE <n> >> >> >> >> >> CPU type: >> >> Architecture: x86_64 >> CPU op-mode(s): 32-bit, 64-bit >> Address sizes: 46 bits physical, 48 bits virtual >> Byte Order: Little Endian >> CPU(s): 16 >> On-line CPU(s) list: 0-15 >> Vendor ID: GenuineIntel >> Model name: 12th Gen Intel(R) Core(TM) i9-12900K >> CPU family: 6 >> Model: 151 >> Thread(s) per core: 1 >> Core(s) per socket: 16 >> Socket(s): 1 >> Stepping: 2 >> BogoMIPS: 6374.40 >> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid tsc_known_freq pni pclmulqdq vmx ssse3 cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx rdrand hypervisor lahf_lm abm 3dnowprefetch invpcid_single tpr_shadow vnmi flexpriority vpid fsgsbase avx2 invpcid rdseed clflushopt md_clear flush_l1d arch_capabilities >> Virtualization: VT-x >> Hypervisor vendor: KVM >> Virtualization type: full >> L1d cache: 768 KiB (16 instances) >> L1i cache: 512 KiB (16 instances) >> L2 cache: 20 MiB (16 instances) >> L3 cache: 480 MiB (16 instances) >> NUMA node(s): 1 >> NUMA node0 CPU(s): 0-15 >> Vulnerability Itlb multihit: Not affected >> Vulnerability L1tf: Not affected >> Vulnerability Mds: Not affected >> Vulnerability Meltdown: Not affected >> Vulnerability Mmio stale data: Not affected >> Vulnerability Spec store bypass: Vulnerable >> Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization >> Vulnerability Spectre v2: Mitigation; Retpolines, STIBP disabled, RSB filling >> Vulnerability Srbds: Not affected >> Vulnerability Tsx async abort: Not affected >> >> Memory info: >> >> total used free shared buff/cache available >> Mem: 24617344 880596 19736440 44408 4000308 23297996 >> Swap: 1532980 0 1532980 >> >> >> ================================================================================ >> >> The SBU unit value is equal to 19 seconds at -j16. >> >> ================================================================================ >> [binutils-pass1-2.38] >> >> Build time is: 0 minutes and 19 seconds >> Build time in seconds is: 19 >> Approximate SBU time is: 1.0 >> Disk usage before unpacking the package: 465940 KB or 455.020 MB >> Disk usage before deleting the source and build dirs: 1151156 KB or 1124.176 MB >> Required space to build the package: 685216 KB or 669.156 MB >> Installed files disk usage: 102216 KB or 99.820 MB >> >> ================================================================================ >> [gcc-pass1-12.1.0] >> >> Build time is: 2 minutes and 19 seconds >> Build time in seconds is: 139 >> Approximate SBU time is: 7.3 >> Disk usage before unpacking the package: 568156 KB or 554.840 MB >> Disk usage before deleting the source and build dirs: 4809520 KB or 4696.797 MB >> Required space to build the package: 4241364 KB or 4141.957 MB >> Installed files disk usage: 1083668 KB or 1058.269 MB >> >> ================================================================================ >> [linux-headers-5.18.8] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 1651824 KB or 1613.109 MB >> Disk usage before deleting the source and build dirs: 2993388 KB or 2923.230 MB >> Required space to build the package: 1341564 KB or 1310.121 MB >> Installed files disk usage: 8440 KB or 8.243 MB >> >> ================================================================================ >> [glibc-2.35] >> >> Build time is: 1 minutes and 8 seconds >> Build time in seconds is: 68 >> Approximate SBU time is: 3.6 >> Disk usage before unpacking the package: 1660264 KB or 1621.352 MB >> Disk usage before deleting the source and build dirs: 2492984 KB or 2434.555 MB >> Required space to build the package: 832720 KB or 813.203 MB >> Installed files disk usage: 108884 KB or 106.332 MB >> >> ================================================================================ >> [gcc-libstdc++-12.1.0] >> >> Build time is: 0 minutes and 13 seconds >> Build time in seconds is: 13 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 1769148 KB or 1727.684 MB >> Disk usage before deleting the source and build dirs: 2859468 KB or 2792.449 MB >> Required space to build the package: 1090320 KB or 1064.765 MB >> Installed files disk usage: 30156 KB or 29.449 MB >> >> ================================================================================ >> [m4-1.4.19] >> >> Build time is: 0 minutes and 10 seconds >> Build time in seconds is: 10 >> Approximate SBU time is: 0.5 >> Disk usage before unpacking the package: 1799304 KB or 1757.133 MB >> Disk usage before deleting the source and build dirs: 1831296 KB or 1788.375 MB >> Required space to build the package: 31992 KB or 31.242 MB >> Installed files disk usage: 1852 KB or 1.808 MB >> >> ================================================================================ >> [ncurses-6.3] >> >> Build time is: 0 minutes and 24 seconds >> Build time in seconds is: 24 >> Approximate SBU time is: 1.3 >> Disk usage before unpacking the package: 1801156 KB or 1758.941 MB >> Disk usage before deleting the source and build dirs: 1854620 KB or 1811.152 MB >> Required space to build the package: 53464 KB or 52.211 MB >> Installed files disk usage: 10396 KB or 10.153 MB >> >> ================================================================================ >> [bash-5.1.16] >> >> Build time is: 0 minutes and 13 seconds >> Build time in seconds is: 13 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 1811552 KB or 1769.094 MB >> Disk usage before deleting the source and build dirs: 1877208 KB or 1833.211 MB >> Required space to build the package: 65656 KB or 64.117 MB >> Installed files disk usage: 12928 KB or 12.625 MB >> >> ================================================================================ >> [coreutils-9.1] >> >> Build time is: 0 minutes and 19 seconds >> Build time in seconds is: 19 >> Approximate SBU time is: 1.0 >> Disk usage before unpacking the package: 1824480 KB or 1781.719 MB >> Disk usage before deleting the source and build dirs: 1990056 KB or 1943.414 MB >> Required space to build the package: 165576 KB or 161.695 MB >> Installed files disk usage: 43584 KB or 42.562 MB >> >> ================================================================================ >> [diffutils-3.8] >> >> Build time is: 0 minutes and 14 seconds >> Build time in seconds is: 14 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 1868064 KB or 1824.281 MB >> Disk usage before deleting the source and build dirs: 1894548 KB or 1850.145 MB >> Required space to build the package: 26484 KB or 25.864 MB >> Installed files disk usage: 2660 KB or 2.598 MB >> >> ================================================================================ >> [file-5.42] >> >> Build time is: 0 minutes and 7 seconds >> Build time in seconds is: 7 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 1870724 KB or 1826.879 MB >> Disk usage before deleting the source and build dirs: 1905764 KB or 1861.098 MB >> Required space to build the package: 35040 KB or 34.219 MB >> Installed files disk usage: 8320 KB or 8.125 MB >> >> ================================================================================ >> [findutils-4.9.0] >> >> Build time is: 0 minutes and 13 seconds >> Build time in seconds is: 13 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 1879044 KB or 1835.004 MB >> Disk usage before deleting the source and build dirs: 1921464 KB or 1876.430 MB >> Required space to build the package: 42420 KB or 41.426 MB >> Installed files disk usage: 3964 KB or 3.871 MB >> >> ================================================================================ >> [gawk-5.1.1] >> >> Build time is: 0 minutes and 7 seconds >> Build time in seconds is: 7 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 1883008 KB or 1838.875 MB >> Disk usage before deleting the source and build dirs: 1928716 KB or 1883.512 MB >> Required space to build the package: 45708 KB or 44.637 MB >> Installed files disk usage: 6580 KB or 6.426 MB >> >> ================================================================================ >> [grep-3.7] >> >> Build time is: 0 minutes and 14 seconds >> Build time in seconds is: 14 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 1889588 KB or 1845.301 MB >> Disk usage before deleting the source and build dirs: 1914520 KB or 1869.648 MB >> Required space to build the package: 24932 KB or 24.347 MB >> Installed files disk usage: 1548 KB or 1.511 MB >> >> ================================================================================ >> [gzip-1.12] >> >> Build time is: 0 minutes and 7 seconds >> Build time in seconds is: 7 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 1891136 KB or 1846.812 MB >> Disk usage before deleting the source and build dirs: 1902540 KB or 1857.949 MB >> Required space to build the package: 11404 KB or 11.137 MB >> Installed files disk usage: 456 KB or 0.446 MB >> >> ================================================================================ >> [make-4.3] >> >> Build time is: 0 minutes and 4 seconds >> Build time in seconds is: 4 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 1891592 KB or 1847.258 MB >> Disk usage before deleting the source and build dirs: 1907216 KB or 1862.516 MB >> Required space to build the package: 15624 KB or 15.258 MB >> Installed files disk usage: 2588 KB or 2.527 MB >> >> ================================================================================ >> [patch-2.7.6] >> >> Build time is: 0 minutes and 8 seconds >> Build time in seconds is: 8 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 1894180 KB or 1849.785 MB >> Disk usage before deleting the source and build dirs: 1906724 KB or 1862.035 MB >> Required space to build the package: 12544 KB or 12.250 MB >> Installed files disk usage: 768 KB or 0.750 MB >> >> ================================================================================ >> [sed-4.8] >> >> Build time is: 0 minutes and 7 seconds >> Build time in seconds is: 7 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 1894948 KB or 1850.535 MB >> Disk usage before deleting the source and build dirs: 1916592 KB or 1871.672 MB >> Required space to build the package: 21644 KB or 21.137 MB >> Installed files disk usage: 1572 KB or 1.535 MB >> >> ================================================================================ >> [tar-1.34] >> >> Build time is: 0 minutes and 11 seconds >> Build time in seconds is: 11 >> Approximate SBU time is: 0.6 >> Disk usage before unpacking the package: 1896520 KB or 1852.070 MB >> Disk usage before deleting the source and build dirs: 1934932 KB or 1889.582 MB >> Required space to build the package: 38412 KB or 37.512 MB >> Installed files disk usage: 5300 KB or 5.176 MB >> >> ================================================================================ >> [xz-5.2.5] >> >> Build time is: 0 minutes and 5 seconds >> Build time in seconds is: 5 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 1901820 KB or 1857.246 MB >> Disk usage before deleting the source and build dirs: 1917012 KB or 1872.082 MB >> Required space to build the package: 15192 KB or 14.836 MB >> Installed files disk usage: 2052 KB or 2.004 MB >> >> ================================================================================ >> [binutils-pass2-2.38] >> >> Build time is: 0 minutes and 25 seconds >> Build time in seconds is: 25 >> Approximate SBU time is: 1.3 >> Disk usage before unpacking the package: 1903872 KB or 1859.250 MB >> Disk usage before deleting the source and build dirs: 2436028 KB or 2378.934 MB >> Required space to build the package: 532156 KB or 519.684 MB >> Installed files disk usage: 47388 KB or 46.277 MB >> >> ================================================================================ >> [gcc-pass2-12.1.0] >> >> Build time is: 3 minutes and 49 seconds >> Build time in seconds is: 229 >> Approximate SBU time is: 12.1 >> Disk usage before unpacking the package: 1951260 KB or 1905.527 MB >> Disk usage before deleting the source and build dirs: 6687052 KB or 6530.324 MB >> Required space to build the package: 4735792 KB or 4624.797 MB >> Installed files disk usage: 1176760 KB or 1149.180 MB >> >> ================================================================================ >> [changingowner] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 3128020 KB or 3054.707 MB >> Disk usage before deleting the source and build dirs: 3128020 KB or 3054.707 MB >> Required space to build the package: 0 KB or 0.000 MB >> Installed files disk usage: 0 KB or 0.000 MB >> >> ================================================================================ >> [kernfs] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 3128020 KB or 3054.707 MB >> Disk usage before deleting the source and build dirs: 3128020 KB or 3054.707 MB >> Required space to build the package: 0 KB or 0.000 MB >> Installed files disk usage: 0 KB or 0.000 MB >> >> ================================================================================ >> [creatingdirs] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 3128020 KB or 3054.707 MB >> Disk usage before deleting the source and build dirs: 3128220 KB or 3054.902 MB >> Required space to build the package: 200 KB or 0.195 MB >> Installed files disk usage: 200 KB or 0.195 MB >> >> ================================================================================ >> [createfiles] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 3128220 KB or 3054.902 MB >> Disk usage before deleting the source and build dirs: 3128236 KB or 3054.918 MB >> Required space to build the package: 16 KB or 0.016 MB >> Installed files disk usage: 16 KB or 0.016 MB >> >> ================================================================================ >> [gettext-0.21] >> >> Build time is: 1 minutes and 34 seconds >> Build time in seconds is: 94 >> Approximate SBU time is: 4.9 >> Disk usage before unpacking the package: 3128236 KB or 3054.918 MB >> Disk usage before deleting the source and build dirs: 3413412 KB or 3333.410 MB >> Required space to build the package: 285176 KB or 278.492 MB >> Installed files disk usage: 16680 KB or 16.289 MB >> >> ================================================================================ >> [bison-3.8.2] >> >> Build time is: 0 minutes and 14 seconds >> Build time in seconds is: 14 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3144916 KB or 3071.207 MB >> Disk usage before deleting the source and build dirs: 3203568 KB or 3128.484 MB >> Required space to build the package: 58652 KB or 57.277 MB >> Installed files disk usage: 5532 KB or 5.402 MB >> >> ================================================================================ >> [perl-5.36.0] >> >> Build time is: 0 minutes and 38 seconds >> Build time in seconds is: 38 >> Approximate SBU time is: 2.0 >> Disk usage before unpacking the package: 3150448 KB or 3076.609 MB >> Disk usage before deleting the source and build dirs: 3437200 KB or 3356.641 MB >> Required space to build the package: 286752 KB or 280.032 MB >> Installed files disk usage: 64664 KB or 63.149 MB >> >> ================================================================================ >> [Python-3.10.5] >> >> Build time is: 0 minutes and 29 seconds >> Build time in seconds is: 29 >> Approximate SBU time is: 1.5 >> Disk usage before unpacking the package: 3215112 KB or 3139.758 MB >> Disk usage before deleting the source and build dirs: 3584976 KB or 3500.953 MB >> Required space to build the package: 369864 KB or 361.195 MB >> Installed files disk usage: 177172 KB or 173.019 MB >> >> ================================================================================ >> [texinfo-6.8] >> >> Build time is: 0 minutes and 12 seconds >> Build time in seconds is: 12 >> Approximate SBU time is: 0.6 >> Disk usage before unpacking the package: 3392284 KB or 3312.777 MB >> Disk usage before deleting the source and build dirs: 3504212 KB or 3422.082 MB >> Required space to build the package: 111928 KB or 109.305 MB >> Installed files disk usage: 11928 KB or 11.649 MB >> >> ================================================================================ >> [util-linux-2.38] >> >> Build time is: 0 minutes and 13 seconds >> Build time in seconds is: 13 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3404212 KB or 3324.426 MB >> Disk usage before deleting the source and build dirs: 3555556 KB or 3472.223 MB >> Required space to build the package: 151344 KB or 147.797 MB >> Installed files disk usage: 32592 KB or 31.828 MB >> >> ================================================================================ >> [cleanup] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 3436804 KB or 3356.254 MB >> Disk usage before deleting the source and build dirs: 2204756 KB or 2153.082 MB >> Required space to build the package: -1232048 KB or -1203.172 MB >> Installed files disk usage: -1232048 KB or -1203.172 MB >> >> ================================================================================ >> [man-pages-5.13] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 2204756 KB or 2153.082 MB >> Disk usage before deleting the source and build dirs: 2238308 KB or 2185.848 MB >> Required space to build the package: 33552 KB or 32.766 MB >> Installed files disk usage: 15904 KB or 15.531 MB >> >> ================================================================================ >> [iana-etc-20220610] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 2220660 KB or 2168.613 MB >> Disk usage before deleting the source and build dirs: 2225524 KB or 2173.363 MB >> Required space to build the package: 4864 KB or 4.750 MB >> Installed files disk usage: 556 KB or 0.543 MB >> >> ================================================================================ >> [glibc-2.35] >> >> Build time is: 2 minutes and 13 seconds >> Build time in seconds is: 133 >> Approximate SBU time is: 7.0 >> Disk usage before unpacking the package: 2221216 KB or 2169.156 MB >> Disk usage before deleting the source and build dirs: 3181832 KB or 3107.258 MB >> Required space to build the package: 960616 KB or 938.102 MB >> Installed files disk usage: 234524 KB or 229.028 MB >> >> ================================================================================ >> [zlib-1.2.12] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 2455740 KB or 2398.184 MB >> Disk usage before deleting the source and build dirs: 2462008 KB or 2404.305 MB >> Required space to build the package: 6268 KB or 6.121 MB >> Installed files disk usage: 248 KB or 0.242 MB >> >> ================================================================================ >> [bzip2-1.0.8] >> >> Build time is: 0 minutes and 2 seconds >> Build time in seconds is: 2 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 2455988 KB or 2398.426 MB >> Disk usage before deleting the source and build dirs: 2463364 KB or 2405.629 MB >> Required space to build the package: 7376 KB or 7.203 MB >> Installed files disk usage: 2468 KB or 2.410 MB >> >> ================================================================================ >> [xz-5.2.5] >> >> Build time is: 0 minutes and 5 seconds >> Build time in seconds is: 5 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 2458456 KB or 2400.836 MB >> Disk usage before deleting the source and build dirs: 2471952 KB or 2414.016 MB >> Required space to build the package: 13496 KB or 13.180 MB >> Installed files disk usage: 416 KB or 0.406 MB >> >> ================================================================================ >> [zstd-1.5.2] >> >> Build time is: 0 minutes and 6 seconds >> Build time in seconds is: 6 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 2458872 KB or 2401.242 MB >> Disk usage before deleting the source and build dirs: 2480612 KB or 2422.473 MB >> Required space to build the package: 21740 KB or 21.231 MB >> Installed files disk usage: 2348 KB or 2.293 MB >> >> ================================================================================ >> [file-5.42] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 2461220 KB or 2403.535 MB >> Disk usage before deleting the source and build dirs: 2477052 KB or 2418.996 MB >> Required space to build the package: 15832 KB or 15.461 MB >> Installed files disk usage: 72 KB or 0.070 MB >> >> ================================================================================ >> [readline-8.1.2] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 2461292 KB or 2403.605 MB >> Disk usage before deleting the source and build dirs: 2476804 KB or 2418.754 MB >> Required space to build the package: 15512 KB or 15.149 MB >> Installed files disk usage: 5388 KB or 5.262 MB >> >> ================================================================================ >> [m4-1.4.19] >> >> Build time is: 0 minutes and 19 seconds >> Build time in seconds is: 19 >> Approximate SBU time is: 1.0 >> Disk usage before unpacking the package: 2466680 KB or 2408.867 MB >> Disk usage before deleting the source and build dirs: 2496620 KB or 2438.105 MB >> Required space to build the package: 29940 KB or 29.238 MB >> Installed files disk usage: 256 KB or 0.250 MB >> >> ================================================================================ >> [bc-5.3.3] >> >> Build time is: 0 minutes and 5 seconds >> Build time in seconds is: 5 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 2466936 KB or 2409.117 MB >> Disk usage before deleting the source and build dirs: 2474060 KB or 2416.074 MB >> Required space to build the package: 7124 KB or 6.957 MB >> Installed files disk usage: 500 KB or 0.488 MB >> >> ================================================================================ >> [flex-2.6.4] >> >> Build time is: 0 minutes and 4 seconds >> Build time in seconds is: 4 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 2467436 KB or 2409.605 MB >> Disk usage before deleting the source and build dirs: 2481932 KB or 2423.762 MB >> Required space to build the package: 14496 KB or 14.157 MB >> Installed files disk usage: 1636 KB or 1.598 MB >> >> ================================================================================ >> [tcl-8.6.12] >> >> Build time is: 0 minutes and 39 seconds >> Build time in seconds is: 39 >> Approximate SBU time is: 2.1 >> Disk usage before unpacking the package: 2469072 KB or 2411.203 MB >> Disk usage before deleting the source and build dirs: 2557840 KB or 2497.891 MB >> Required space to build the package: 88768 KB or 86.688 MB >> Installed files disk usage: 18620 KB or 18.184 MB >> >> ================================================================================ >> [expect-5.45.4] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 2487692 KB or 2429.387 MB >> Disk usage before deleting the source and build dirs: 2491644 KB or 2433.246 MB >> Required space to build the package: 3952 KB or 3.859 MB >> Installed files disk usage: 632 KB or 0.617 MB >> >> ================================================================================ >> [dejagnu-1.6.3] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 2488324 KB or 2430.004 MB >> Disk usage before deleting the source and build dirs: 2493704 KB or 2435.258 MB >> Required space to build the package: 5380 KB or 5.254 MB >> Installed files disk usage: 1704 KB or 1.664 MB >> >> ================================================================================ >> [binutils-2.38] >> >> Build time is: 0 minutes and 54 seconds >> Build time in seconds is: 54 >> Approximate SBU time is: 2.8 >> Disk usage before unpacking the package: 2490028 KB or 2431.668 MB >> Disk usage before deleting the source and build dirs: 3663304 KB or 3577.445 MB >> Required space to build the package: 1173276 KB or 1145.777 MB >> Installed files disk usage: 167552 KB or 163.625 MB >> >> ================================================================================ >> [gmp-6.2.1] >> >> Build time is: 0 minutes and 12 seconds >> Build time in seconds is: 12 >> Approximate SBU time is: 0.6 >> Disk usage before unpacking the package: 2657580 KB or 2595.293 MB >> Disk usage before deleting the source and build dirs: 2691416 KB or 2628.336 MB >> Required space to build the package: 33836 KB or 33.043 MB >> Installed files disk usage: 2892 KB or 2.824 MB >> >> ================================================================================ >> [mpfr-4.1.0] >> >> Build time is: 0 minutes and 6 seconds >> Build time in seconds is: 6 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 2660472 KB or 2598.117 MB >> Disk usage before deleting the source and build dirs: 2682048 KB or 2619.188 MB >> Required space to build the package: 21576 KB or 21.071 MB >> Installed files disk usage: 1792 KB or 1.750 MB >> >> ================================================================================ >> [mpc-1.2.1] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 2662264 KB or 2599.867 MB >> Disk usage before deleting the source and build dirs: 2671016 KB or 2608.414 MB >> Required space to build the package: 8752 KB or 8.547 MB >> Installed files disk usage: 792 KB or 0.774 MB >> >> ================================================================================ >> [attr-2.5.1] >> >> Build time is: 0 minutes and 2 seconds >> Build time in seconds is: 2 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 2663056 KB or 2600.641 MB >> Disk usage before deleting the source and build dirs: 2667108 KB or 2604.598 MB >> Required space to build the package: 4052 KB or 3.957 MB >> Installed files disk usage: 428 KB or 0.418 MB >> >> ================================================================================ >> [acl-2.3.1] >> >> Build time is: 0 minutes and 2 seconds >> Build time in seconds is: 2 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 2663484 KB or 2601.059 MB >> Disk usage before deleting the source and build dirs: 2669728 KB or 2607.156 MB >> Required space to build the package: 6244 KB or 6.097 MB >> Installed files disk usage: 780 KB or 0.761 MB >> >> ================================================================================ >> [libcap-2.64] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 2664264 KB or 2601.820 MB >> Disk usage before deleting the source and build dirs: 2666936 KB or 2604.430 MB >> Required space to build the package: 2672 KB or 2.610 MB >> Installed files disk usage: 564 KB or 0.551 MB >> >> ================================================================================ >> [shadow-4.11.1] >> >> Build time is: 0 minutes and 6 seconds >> Build time in seconds is: 6 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 2664828 KB or 2602.371 MB >> Disk usage before deleting the source and build dirs: 2710616 KB or 2647.086 MB >> Required space to build the package: 45788 KB or 44.715 MB >> Installed files disk usage: 9172 KB or 8.957 MB >> >> ================================================================================ >> [gcc-12.1.0] >> >> Build time is: 3 minutes and 33 seconds >> Build time in seconds is: 213 >> Approximate SBU time is: 11.2 >> Disk usage before unpacking the package: 2674000 KB or 2611.328 MB >> Disk usage before deleting the source and build dirs: 7055372 KB or 6890.012 MB >> Required space to build the package: 4381372 KB or 4278.684 MB >> Installed files disk usage: 828880 KB or 809.453 MB >> >> ================================================================================ >> [pkg-config-0.29.2] >> >> Build time is: 0 minutes and 10 seconds >> Build time in seconds is: 10 >> Approximate SBU time is: 0.5 >> Disk usage before unpacking the package: 3502880 KB or 3420.781 MB >> Disk usage before deleting the source and build dirs: 3531984 KB or 3449.203 MB >> Required space to build the package: 29104 KB or 28.422 MB >> Installed files disk usage: 1800 KB or 1.758 MB >> >> ================================================================================ >> [ncurses-6.3] >> >> Build time is: 0 minutes and 14 seconds >> Build time in seconds is: 14 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3504680 KB or 3422.539 MB >> Disk usage before deleting the source and build dirs: 3550296 KB or 3467.086 MB >> Required space to build the package: 45616 KB or 44.547 MB >> Installed files disk usage: 6188 KB or 6.043 MB >> >> ================================================================================ >> [sed-4.8] >> >> Build time is: 0 minutes and 16 seconds >> Build time in seconds is: 16 >> Approximate SBU time is: 0.8 >> Disk usage before unpacking the package: 3510868 KB or 3428.582 MB >> Disk usage before deleting the source and build dirs: 3530688 KB or 3447.938 MB >> Required space to build the package: 19820 KB or 19.356 MB >> Installed files disk usage: 556 KB or 0.543 MB >> >> ================================================================================ >> [psmisc-23.5] >> >> Build time is: 0 minutes and 2 seconds >> Build time in seconds is: 2 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3511424 KB or 3429.125 MB >> Disk usage before deleting the source and build dirs: 3517384 KB or 3434.945 MB >> Required space to build the package: 5960 KB or 5.820 MB >> Installed files disk usage: 1212 KB or 1.184 MB >> >> ================================================================================ >> [gettext-0.21] >> >> Build time is: 1 minutes and 39 seconds >> Build time in seconds is: 99 >> Approximate SBU time is: 5.2 >> Disk usage before unpacking the package: 3512636 KB or 3430.309 MB >> Disk usage before deleting the source and build dirs: 3717584 KB or 3630.453 MB >> Required space to build the package: 204948 KB or 200.144 MB >> Installed files disk usage: 12212 KB or 11.925 MB >> >> ================================================================================ >> [bison-3.8.2] >> >> Build time is: 0 minutes and 15 seconds >> Build time in seconds is: 15 >> Approximate SBU time is: 0.8 >> Disk usage before unpacking the package: 3524848 KB or 3442.234 MB >> Disk usage before deleting the source and build dirs: 3579276 KB or 3495.387 MB >> Required space to build the package: 54428 KB or 53.153 MB >> Installed files disk usage: 1276 KB or 1.246 MB >> >> ================================================================================ >> [grep-3.7] >> >> Build time is: 0 minutes and 15 seconds >> Build time in seconds is: 15 >> Approximate SBU time is: 0.8 >> Disk usage before unpacking the package: 3526124 KB or 3443.480 MB >> Disk usage before deleting the source and build dirs: 3549572 KB or 3466.379 MB >> Required space to build the package: 23448 KB or 22.899 MB >> Installed files disk usage: 172 KB or 0.168 MB >> >> ================================================================================ >> [bash-5.1.16] >> >> Build time is: 0 minutes and 16 seconds >> Build time in seconds is: 16 >> Approximate SBU time is: 0.8 >> Disk usage before unpacking the package: 3526296 KB or 3443.648 MB >> Disk usage before deleting the source and build dirs: 3576856 KB or 3493.023 MB >> Required space to build the package: 50560 KB or 49.375 MB >> Installed files disk usage: 1844 KB or 1.801 MB >> >> ================================================================================ >> [libtool-2.4.7] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 3528140 KB or 3445.449 MB >> Disk usage before deleting the source and build dirs: 3541176 KB or 3458.180 MB >> Required space to build the package: 13036 KB or 12.731 MB >> Installed files disk usage: 2752 KB or 2.688 MB >> >> ================================================================================ >> [gdbm-1.23] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 3530892 KB or 3448.137 MB >> Disk usage before deleting the source and build dirs: 3542152 KB or 3459.133 MB >> Required space to build the package: 11260 KB or 10.996 MB >> Installed files disk usage: 1548 KB or 1.511 MB >> >> ================================================================================ >> [gperf-3.1] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3532440 KB or 3449.648 MB >> Disk usage before deleting the source and build dirs: 3538000 KB or 3455.078 MB >> Required space to build the package: 5560 KB or 5.430 MB >> Installed files disk usage: 624 KB or 0.610 MB >> >> ================================================================================ >> [expat-2.4.8] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 3533064 KB or 3450.258 MB >> Disk usage before deleting the source and build dirs: 3540608 KB or 3457.625 MB >> Required space to build the package: 7544 KB or 7.367 MB >> Installed files disk usage: 892 KB or 0.871 MB >> >> ================================================================================ >> [inetutils-2.2] >> >> Build time is: 0 minutes and 18 seconds >> Build time in seconds is: 18 >> Approximate SBU time is: 0.9 >> Disk usage before unpacking the package: 3533956 KB or 3451.129 MB >> Disk usage before deleting the source and build dirs: 3564008 KB or 3480.477 MB >> Required space to build the package: 30052 KB or 29.348 MB >> Installed files disk usage: 3060 KB or 2.988 MB >> >> ================================================================================ >> [less-590] >> >> Build time is: 0 minutes and 2 seconds >> Build time in seconds is: 2 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3537016 KB or 3454.117 MB >> Disk usage before deleting the source and build dirs: 3541296 KB or 3458.297 MB >> Required space to build the package: 4280 KB or 4.180 MB >> Installed files disk usage: 808 KB or 0.789 MB >> >> ================================================================================ >> [perl-5.36.0] >> >> Build time is: 0 minutes and 48 seconds >> Build time in seconds is: 48 >> Approximate SBU time is: 2.5 >> Disk usage before unpacking the package: 3537824 KB or 3454.906 MB >> Disk usage before deleting the source and build dirs: 3777164 KB or 3688.637 MB >> Required space to build the package: 239340 KB or 233.731 MB >> Installed files disk usage: 22136 KB or 21.617 MB >> >> ================================================================================ >> [xml-parser-2.46] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3559960 KB or 3476.523 MB >> Disk usage before deleting the source and build dirs: 3562340 KB or 3478.848 MB >> Required space to build the package: 2380 KB or 2.325 MB >> Installed files disk usage: 612 KB or 0.598 MB >> >> ================================================================================ >> [intltool-0.51.0] >> >> Build time is: 0 minutes and 2 seconds >> Build time in seconds is: 2 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3560572 KB or 3477.121 MB >> Disk usage before deleting the source and build dirs: 3561944 KB or 3478.461 MB >> Required space to build the package: 1372 KB or 1.340 MB >> Installed files disk usage: 184 KB or 0.180 MB >> >> ================================================================================ >> [autoconf-2.71] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3560756 KB or 3477.301 MB >> Disk usage before deleting the source and build dirs: 3572592 KB or 3488.859 MB >> Required space to build the package: 11836 KB or 11.558 MB >> Installed files disk usage: 3540 KB or 3.457 MB >> >> ================================================================================ >> [automake-1.16.5] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3564296 KB or 3480.758 MB >> Disk usage before deleting the source and build dirs: 3579792 KB or 3495.891 MB >> Required space to build the package: 15496 KB or 15.133 MB >> Installed files disk usage: 2420 KB or 2.363 MB >> >> ================================================================================ >> [openssl-3.0.4] >> >> Build time is: 1 minutes and 16 seconds >> Build time in seconds is: 76 >> Approximate SBU time is: 4.0 >> Disk usage before unpacking the package: 3566716 KB or 3483.121 MB >> Disk usage before deleting the source and build dirs: 4040440 KB or 3945.742 MB >> Required space to build the package: 473724 KB or 462.621 MB >> Installed files disk usage: 42976 KB or 41.969 MB >> >> ================================================================================ >> [kmod-29] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 3609692 KB or 3525.090 MB >> Disk usage before deleting the source and build dirs: 3621856 KB or 3536.969 MB >> Required space to build the package: 12164 KB or 11.879 MB >> Installed files disk usage: 1184 KB or 1.156 MB >> >> ================================================================================ >> [libelf-0.187] >> >> Build time is: 0 minutes and 11 seconds >> Build time in seconds is: 11 >> Approximate SBU time is: 0.6 >> Disk usage before unpacking the package: 3610876 KB or 3526.246 MB >> Disk usage before deleting the source and build dirs: 3709532 KB or 3622.590 MB >> Required space to build the package: 98656 KB or 96.344 MB >> Installed files disk usage: 992 KB or 0.969 MB >> >> ================================================================================ >> [libffi-3.4.2] >> >> Build time is: 0 minutes and 2 seconds >> Build time in seconds is: 2 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3611868 KB or 3527.215 MB >> Disk usage before deleting the source and build dirs: 3620100 KB or 3535.254 MB >> Required space to build the package: 8232 KB or 8.039 MB >> Installed files disk usage: 140 KB or 0.137 MB >> >> ================================================================================ >> [Python-3.10.5] >> >> Build time is: 2 minutes and 15 seconds >> Build time in seconds is: 135 >> Approximate SBU time is: 7.1 >> Disk usage before unpacking the package: 3612008 KB or 3527.352 MB >> Disk usage before deleting the source and build dirs: 3898408 KB or 3807.039 MB >> Required space to build the package: 286400 KB or 279.687 MB >> Installed files disk usage: 81692 KB or 79.777 MB >> >> ================================================================================ >> [wheel-0.37.1] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 3693700 KB or 3607.129 MB >> Disk usage before deleting the source and build dirs: 3694656 KB or 3608.062 MB >> Required space to build the package: 956 KB or 0.933 MB >> Installed files disk usage: 308 KB or 0.301 MB >> >> ================================================================================ >> [ninja-1.11.0] >> >> Build time is: 0 minutes and 14 seconds >> Build time in seconds is: 14 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3694008 KB or 3607.430 MB >> Disk usage before deleting the source and build dirs: 3732216 KB or 3644.742 MB >> Required space to build the package: 38208 KB or 37.312 MB >> Installed files disk usage: 7556 KB or 7.379 MB >> >> ================================================================================ >> [meson-0.62.2] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3701564 KB or 3614.809 MB >> Disk usage before deleting the source and build dirs: 3739736 KB or 3652.086 MB >> Required space to build the package: 38172 KB or 37.277 MB >> Installed files disk usage: 7448 KB or 7.273 MB >> >> ================================================================================ >> [coreutils-9.1] >> >> Build time is: 0 minutes and 41 seconds >> Build time in seconds is: 41 >> Approximate SBU time is: 2.2 >> Disk usage before unpacking the package: 3709012 KB or 3622.082 MB >> Disk usage before deleting the source and build dirs: 3830012 KB or 3740.246 MB >> Required space to build the package: 121000 KB or 118.164 MB >> Installed files disk usage: -4932 KB or -4.816 MB >> >> ================================================================================ >> [check-0.15.2] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 3704080 KB or 3617.266 MB >> Disk usage before deleting the source and build dirs: 3714840 KB or 3627.773 MB >> Required space to build the package: 10760 KB or 10.507 MB >> Installed files disk usage: 624 KB or 0.609 MB >> >> ================================================================================ >> [diffutils-3.8] >> >> Build time is: 0 minutes and 14 seconds >> Build time in seconds is: 14 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3704704 KB or 3617.875 MB >> Disk usage before deleting the source and build dirs: 3728640 KB or 3641.250 MB >> Required space to build the package: 23936 KB or 23.375 MB >> Installed files disk usage: 236 KB or 0.230 MB >> >> ================================================================================ >> [gawk-5.1.1] >> >> Build time is: 0 minutes and 8 seconds >> Build time in seconds is: 8 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 3704940 KB or 3618.105 MB >> Disk usage before deleting the source and build dirs: 3749348 KB or 3661.473 MB >> Required space to build the package: 44408 KB or 43.368 MB >> Installed files disk usage: 4924 KB or 4.809 MB >> >> ================================================================================ >> [findutils-4.9.0] >> >> Build time is: 0 minutes and 21 seconds >> Build time in seconds is: 21 >> Approximate SBU time is: 1.1 >> Disk usage before unpacking the package: 3709864 KB or 3622.914 MB >> Disk usage before deleting the source and build dirs: 3745980 KB or 3658.184 MB >> Required space to build the package: 36116 KB or 35.270 MB >> Installed files disk usage: -252 KB or -0.246 MB >> >> ================================================================================ >> [groff-1.22.4] >> >> Build time is: 0 minutes and 35 seconds >> Build time in seconds is: 35 >> Approximate SBU time is: 1.8 >> Disk usage before unpacking the package: 3709612 KB or 3622.668 MB >> Disk usage before deleting the source and build dirs: 3799708 KB or 3710.652 MB >> Required space to build the package: 90096 KB or 87.984 MB >> Installed files disk usage: 31068 KB or 30.340 MB >> >> ================================================================================ >> [grub-2.06] >> >> Build time is: 0 minutes and 17 seconds >> Build time in seconds is: 17 >> Approximate SBU time is: 0.9 >> Disk usage before unpacking the package: 3740680 KB or 3653.008 MB >> Disk usage before deleting the source and build dirs: 3902636 KB or 3811.168 MB >> Required space to build the package: 161956 KB or 158.160 MB >> Installed files disk usage: 35276 KB or 34.449 MB >> >> ================================================================================ >> [gzip-1.12] >> >> Build time is: 0 minutes and 8 seconds >> Build time in seconds is: 8 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 3775956 KB or 3687.457 MB >> Disk usage before deleting the source and build dirs: 3786956 KB or 3698.199 MB >> Required space to build the package: 11000 KB or 10.742 MB >> Installed files disk usage: 108 KB or 0.105 MB >> >> ================================================================================ >> [iproute2-5.18.0] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 3776064 KB or 3687.562 MB >> Disk usage before deleting the source and build dirs: 3792160 KB or 3703.281 MB >> Required space to build the package: 16096 KB or 15.719 MB >> Installed files disk usage: 3408 KB or 3.329 MB >> >> ================================================================================ >> [kbd-2.5.1] >> >> Build time is: 0 minutes and 5 seconds >> Build time in seconds is: 5 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 3779472 KB or 3690.891 MB >> Disk usage before deleting the source and build dirs: 3814552 KB or 3725.148 MB >> Required space to build the package: 35080 KB or 34.257 MB >> Installed files disk usage: 6068 KB or 5.925 MB >> >> ================================================================================ >> [libpipeline-1.5.6] >> >> Build time is: 0 minutes and 8 seconds >> Build time in seconds is: 8 >> Approximate SBU time is: 0.4 >> Disk usage before unpacking the package: 3785540 KB or 3696.816 MB >> Disk usage before deleting the source and build dirs: 3794636 KB or 3705.699 MB >> Required space to build the package: 9096 KB or 8.883 MB >> Installed files disk usage: 280 KB or 0.274 MB >> >> ================================================================================ >> [make-4.3] >> >> Build time is: 0 minutes and 6 seconds >> Build time in seconds is: 6 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 3785820 KB or 3697.090 MB >> Disk usage before deleting the source and build dirs: 3799464 KB or 3710.414 MB >> Required space to build the package: 13644 KB or 13.324 MB >> Installed files disk usage: 624 KB or 0.609 MB >> >> ================================================================================ >> [patch-2.7.6] >> >> Build time is: 0 minutes and 13 seconds >> Build time in seconds is: 13 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3786444 KB or 3697.699 MB >> Disk usage before deleting the source and build dirs: 3797908 KB or 3708.895 MB >> Required space to build the package: 11464 KB or 11.196 MB >> Installed files disk usage: -4 KB or -0.004 MB >> >> ================================================================================ >> [tar-1.34] >> >> Build time is: 0 minutes and 20 seconds >> Build time in seconds is: 20 >> Approximate SBU time is: 1.1 >> Disk usage before unpacking the package: 3786440 KB or 3697.695 MB >> Disk usage before deleting the source and build dirs: 3825472 KB or 3735.812 MB >> Required space to build the package: 39032 KB or 38.117 MB >> Installed files disk usage: 3452 KB or 3.371 MB >> >> ================================================================================ >> [texinfo-6.8] >> >> Build time is: 0 minutes and 13 seconds >> Build time in seconds is: 13 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3789892 KB or 3701.066 MB >> Disk usage before deleting the source and build dirs: 3891580 KB or 3800.371 MB >> Required space to build the package: 101688 KB or 99.305 MB >> Installed files disk usage: 1676 KB or 1.637 MB >> >> ================================================================================ >> [vim-9.0.0006] >> >> Build time is: 0 minutes and 11 seconds >> Build time in seconds is: 11 >> Approximate SBU time is: 0.6 >> Disk usage before unpacking the package: 3791568 KB or 3702.703 MB >> Disk usage before deleting the source and build dirs: 3950252 KB or 3857.668 MB >> Required space to build the package: 158684 KB or 154.965 MB >> Installed files disk usage: 43488 KB or 42.469 MB >> >> ================================================================================ >> [eudev-3.2.11] >> >> Build time is: 0 minutes and 6 seconds >> Build time in seconds is: 6 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 3835056 KB or 3745.172 MB >> Disk usage before deleting the source and build dirs: 3882952 KB or 3791.945 MB >> Required space to build the package: 47896 KB or 46.773 MB >> Installed files disk usage: 21932 KB or 21.418 MB >> >> ================================================================================ >> [man-db-2.10.2] >> >> Build time is: 0 minutes and 20 seconds >> Build time in seconds is: 20 >> Approximate SBU time is: 1.1 >> Disk usage before unpacking the package: 3856988 KB or 3766.590 MB >> Disk usage before deleting the source and build dirs: 3894968 KB or 3803.680 MB >> Required space to build the package: 37980 KB or 37.090 MB >> Installed files disk usage: 4060 KB or 3.965 MB >> >> ================================================================================ >> [procps-ng-4.0.0] >> >> Build time is: 0 minutes and 5 seconds >> Build time in seconds is: 5 >> Approximate SBU time is: 0.3 >> Disk usage before unpacking the package: 3861048 KB or 3770.555 MB >> Disk usage before deleting the source and build dirs: 3878712 KB or 3787.805 MB >> Required space to build the package: 17664 KB or 17.250 MB >> Installed files disk usage: 3520 KB or 3.437 MB >> >> ================================================================================ >> [util-linux-2.38] >> >> Build time is: 0 minutes and 13 seconds >> Build time in seconds is: 13 >> Approximate SBU time is: 0.7 >> Disk usage before unpacking the package: 3864568 KB or 3773.992 MB >> Disk usage before deleting the source and build dirs: 3985128 KB or 3891.727 MB >> Required space to build the package: 120560 KB or 117.735 MB >> Installed files disk usage: 1340 KB or 1.309 MB >> >> ================================================================================ >> [e2fsprogs-1.46.5] >> >> Build time is: 0 minutes and 10 seconds >> Build time in seconds is: 10 >> Approximate SBU time is: 0.5 >> Disk usage before unpacking the package: 3865908 KB or 3775.301 MB >> Disk usage before deleting the source and build dirs: 3940344 KB or 3847.992 MB >> Required space to build the package: 74436 KB or 72.691 MB >> Installed files disk usage: 10232 KB or 9.992 MB >> >> ================================================================================ >> [sysklogd-1.5.1] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3876140 KB or 3785.293 MB >> Disk usage before deleting the source and build dirs: 3876800 KB or 3785.938 MB >> Required space to build the package: 660 KB or 0.645 MB >> Installed files disk usage: 140 KB or 0.137 MB >> >> ================================================================================ >> [sysvinit-3.04] >> >> Build time is: 0 minutes and 1 seconds >> Build time in seconds is: 1 >> Approximate SBU time is: 0.1 >> Disk usage before unpacking the package: 3876280 KB or 3785.430 MB >> Disk usage before deleting the source and build dirs: 3879032 KB or 3788.117 MB >> Required space to build the package: 2752 KB or 2.687 MB >> Installed files disk usage: 368 KB or 0.359 MB >> >> ================================================================================ >> [stripping] >> >> Build time is: 0 minutes and 3 seconds >> Build time in seconds is: 3 >> Approximate SBU time is: 0.2 >> Disk usage before unpacking the package: 3876648 KB or 3785.789 MB >> Disk usage before deleting the source and build dirs: 1858896 KB or 1815.328 MB >> Required space to build the package: -2017752 KB or -1970.461 MB >> Installed files disk usage: -2017752 KB or -1970.461 MB >> >> ================================================================================ >> [cleanup] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1858896 KB or 1815.328 MB >> Disk usage before deleting the source and build dirs: 1725144 KB or 1684.711 MB >> Required space to build the package: -133752 KB or -130.617 MB >> Installed files disk usage: -133752 KB or -130.617 MB >> >> ================================================================================ >> [bootscripts-20220623] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1725144 KB or 1684.711 MB >> Disk usage before deleting the source and build dirs: 1725584 KB or 1685.141 MB >> Required space to build the package: 440 KB or 0.430 MB >> Installed files disk usage: 200 KB or 0.195 MB >> >> ================================================================================ >> [symlinks] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1725344 KB or 1684.906 MB >> Disk usage before deleting the source and build dirs: 1725348 KB or 1684.910 MB >> Required space to build the package: 4 KB or 0.004 MB >> Installed files disk usage: 4 KB or 0.004 MB >> >> ================================================================================ >> [network] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1725348 KB or 1684.910 MB >> Disk usage before deleting the source and build dirs: 1725360 KB or 1684.922 MB >> Required space to build the package: 12 KB or 0.012 MB >> Installed files disk usage: 12 KB or 0.012 MB >> >> ================================================================================ >> [usage] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1725360 KB or 1684.922 MB >> Disk usage before deleting the source and build dirs: 1725372 KB or 1684.934 MB >> Required space to build the package: 12 KB or 0.012 MB >> Installed files disk usage: 12 KB or 0.012 MB >> >> ================================================================================ >> [profile] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1725372 KB or 1684.934 MB >> Disk usage before deleting the source and build dirs: 1725376 KB or 1684.938 MB >> Required space to build the package: 4 KB or 0.004 MB >> Installed files disk usage: 4 KB or 0.004 MB >> >> ================================================================================ >> [inputrc] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1725376 KB or 1684.938 MB >> Disk usage before deleting the source and build dirs: 1725380 KB or 1684.941 MB >> Required space to build the package: 4 KB or 0.003 MB >> Installed files disk usage: 4 KB or 0.003 MB >> >> ================================================================================ >> [etcshells] >> >> Build time is: 0 minutes and 0 seconds >> Build time in seconds is: 0 >> Approximate SBU time is: 0.0 >> Disk usage before unpacking the package: 1725380 KB or 1684.941 MB >> Disk usage before deleting the source and build dirs: 1725384 KB or 1684.945 MB >> Required space to build the package: 4 KB or 0.004 MB >> Installed files disk usage: 8 KB or 0.008 MB >> >> ================================================================================ >> [kernel-5.18.8] >> >> Build time is: 1 minutes and 23 seconds >> Build time in seconds is: 83 >> Approximate SBU time is: 4.4 >> Disk usage before unpacking the package: 1725388 KB or 1684.949 MB >> Disk usage before deleting the source and build dirs: 3725984 KB or 3638.656 MB >> Required space to build the package: 2000596 KB or 1953.707 MB >> Installed files disk usage: 78028 KB or 76.199 MB >> >> >> ================================================================================ >> >> Total time required to build the system: 119.8 SBU >> Total Installed files disk usage: 1337476.000 KB or 1306.128 MB >> -- >> http://lists.linuxfromscratch.org/sympa/info/alfs-discuss >> Unsubscribe: See the above information page Thanks for reply Ken. I have build the same configuration on new VM with all logs enabled - the kernel .config file was version 15.8.3 and the problem with kernel build time repeated itself. But this time I have closely monitored the build in another terminal and noticed that when using .config file from older version of kernel somehow make is executed as -j1 and not -j16. But even then kernel build time of 228, at that moment I have stopped build with Ctrl-C and changed in configuration location of .config file to that of current version, which I have manually prepared previously using just make menuconfig. Kernel build finished in 1:23 but is still 76 Mb. This time make was executed using -j16! Me being me have then switched VM and cleaned previous build and started new build with current kernel .config 15.8.8 and as expected kernel build was quick (1:24) with the same size. Until your comment on size I was not aware of possible problem there. I guess I will have (in due time) some digging to do on what options can I safely disable in menuconfig. After breaking build of kernel the build luckily restarts at that point again. With logs enabled I have tracked issue to (log file attached): HOSTLD scripts/kconfig/conf * * Restart config... * * * Firmware Drivers * BIOS Enhanced Disk Drive calls determine boot disk (EDD) [N/m/y/?] n Export DMI identification via sysfs to userspace (DMIID) [Y/n/?] y DMI table support in sysfs (DMI_SYSFS) [N/m/y/?] n QEMU fw_cfg device support in sysfs (FW_CFG_SYSFS) [N/m/y/?] n Mark VGA/VBE/EFI FB as generic system framebuffer (SYSFB_SIMPLEFB) [N/y/?] n Load custom ACPI SSDT overlay from an EFI variable (EFI_CUSTOM_SSDT_OVERLAYS) [Y/n/?] y Disable EFI runtime services support by default (EFI_DISABLE_RUNTIME) [N/y/?] (NEW) In addition I have run manual build and checked make menuconfig against book. It was OK. Running make OK. Manual run with the old .config (15-8-1) resulted in same problem. Manual run with make oldconfig resulted in question: Disable EFI runtime services support by default (EFI_DISABLE_RUNTIME) [N/y/?] (NEW). after answering yes build proceeded normally. After setting password and installing grub and modified grub.cfg I have normally logged in the build version. Dragan -- http://lists.linuxfromscratch.org/sympa/info/alfs-discuss Unsubscribe: See the above information page
1002-kernel-5.18.8_15.8.1-cfg
(text/plain, 1.2 KB)
Sun Jul 3 11:46:51 UTC 2022 KB: 1725548 / make[1]: Entering directory '/sources/linux-5.18.8' make[1]: Leaving directory '/sources/linux-5.18.8' '../kernel-config' -> '.config' make[1]: Entering directory '/sources/linux-5.18.8' SYNC include/config/auto.conf.cmd HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/confdata.o HOSTCC scripts/kconfig/expr.o LEX scripts/kconfig/lexer.lex.c YACC scripts/kconfig/parser.tab.[ch] HOSTCC scripts/kconfig/menu.o HOSTCC scripts/kconfig/preprocess.o HOSTCC scripts/kconfig/util.o HOSTCC scripts/kconfig/symbol.o HOSTCC scripts/kconfig/lexer.lex.o HOSTCC scripts/kconfig/parser.tab.o HOSTLD scripts/kconfig/conf * * Restart config... * * * Firmware Drivers * BIOS Enhanced Disk Drive calls determine boot disk (EDD) [N/m/y/?] n Export DMI identification via sysfs to userspace (DMIID) [Y/n/?] y DMI table support in sysfs (DMI_SYSFS) [N/m/y/?] n QEMU fw_cfg device support in sysfs (FW_CFG_SYSFS) [N/m/y/?] n Mark VGA/VBE/EFI FB as generic system framebuffer (SYSFB_SIMPLEFB) [N/y/?] n Load custom ACPI SSDT overlay from an EFI variable (EFI_CUSTOM_SSDT_OVERLAYS) [Y/n/?] y Disable EFI runtime services support by default (EFI_DISABLE_RUNTIME) [N/y/?] (NEW)