Re: Glibc build fail

"kevadesu" ([email protected] via lfs-support Mailing List) <[email protected]>
Newsgroups gmane.linux.lfs.support
Message-ID <[email protected]> 
Xi Ruoyao ([email protected] via lfs-support Mailing List) <[email protected]> wrote:
>On Fri, 2024-11-08 at 16:45 +0000, [email protected] wrote:
>&gt; Here&#x27;s the requested line
>&gt; &quot;checking whether x86_64-lfs-linux-gnu-g++ can link programs... yes&quot;
>&gt; There should also be a config.log attached
>
>Hmm I thought config.log should show why $LFS_TGT-g++ could link
>programs, but it doesn&#x27;t :(.
>
>Try
>
>echo &quot;int main(){}&quot; | $LFS_TGT-g++ -x c++ - -Wl,--verbose &amp;&gt; dummy.log
>
>and attach the created dummy.log.
>
>-- 
>Xi Ruoyao &lt;[email protected]&gt;
>School of Aerospace Science and Technology, Xidian University
>-- 
>http://lists.linuxfromscratch.org/sympa/info/lfs-support
>Unsubscribe: See the above information page

-- 
http://lists.linuxfromscratch.org/sympa/info/lfs-support
Unsubscribe: See the above information page
dummy.log (text/x-log, 13.1 KB) 
GNU ld (GNU Binutils) 2.43.1
  Supported emulations:
   elf_x86_64
   elf32_x86_64
   elf_i386
   elf_iamcu
using internal linker script:
==================================================
/* Script for -pie -z combreloc -z separate-code */
/* Copyright (C) 2014-2024 Free Software Foundation, Inc.
   Copying and distribution of this script, with or without modification,
   are permitted in any medium without royalty provided the copyright
   notice and this notice are preserved.  */
OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64",
	      "elf64-x86-64")
OUTPUT_ARCH(i386:x86-64)
ENTRY(_start)
SEARCH_DIR("=/mnt/lfs/tools/x86_64-lfs-linux-gnu/lib64"); SEARCH_DIR("=/usr/local/lib64"); SEARCH_DIR("=/lib64"); SEARCH_DIR("=/usr/lib64"); SEARCH_DIR("=/mnt/lfs/tools/x86_64-lfs-linux-gnu/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib");
SECTIONS
{
  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0)); . = SEGMENT_START("text-segment", 0) + SIZEOF_HEADERS;
  .interp         : { *(.interp) }
  .note.gnu.build-id  : { *(.note.gnu.build-id) }
  .hash           : { *(.hash) }
  .gnu.hash       : { *(.gnu.hash) }
  .dynsym         : { *(.dynsym) }
  .dynstr         : { *(.dynstr) }
  .gnu.version    : { *(.gnu.version) }
  .gnu.version_d  : { *(.gnu.version_d) }
  .gnu.version_r  : { *(.gnu.version_r) }
  .rela.dyn       :
    {
      *(.rela.init)
      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
      *(.rela.fini)
      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
      *(.rela.ctors)
      *(.rela.dtors)
      *(.rela.got)
      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
      *(.rela.ldata .rela.ldata.* .rela.gnu.linkonce.l.*)
      *(.rela.lbss .rela.lbss.* .rela.gnu.linkonce.lb.*)
      *(.rela.lrodata .rela.lrodata.* .rela.gnu.linkonce.lr.*)
      *(.rela.ifunc)
    }
  .rela.plt       :
    {
      *(.rela.plt)
      *(.rela.iplt)
    }
  .relr.dyn : { *(.relr.dyn) }
  . = ALIGN(CONSTANT (MAXPAGESIZE));
  .init           :
  {
    KEEP (*(SORT_NONE(.init)))
  }
  .plt            : { *(.plt) *(.iplt) }
.plt.got        : { *(.plt.got) }
.plt.sec        : { *(.plt.sec) }
  .text           :
  {
    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
    *(.text.exit .text.exit.*)
    *(.text.startup .text.startup.*)
    *(.text.hot .text.hot.*)
    *(SORT(.text.sorted.*))
    *(.text .stub .text.* .gnu.linkonce.t.*)
    /* .gnu.warning sections are handled specially by elf.em.  */
    *(.gnu.warning)
  }
  .fini           :
  {
    KEEP (*(SORT_NONE(.fini)))
  }
  PROVIDE (__etext = .);
  PROVIDE (_etext = .);
  PROVIDE (etext = .);
  . = ALIGN(CONSTANT (MAXPAGESIZE));
  /* Adjust the address for the rodata segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  . = SEGMENT_START("rodata-segment", ALIGN(CONSTANT (MAXPAGESIZE)) + (. & (CONSTANT (MAXPAGESIZE) - 1)));
  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
  .rodata1        : { *(.rodata1) }
  .eh_frame_hdr   : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
  .sframe         : ONLY_IF_RO { *(.sframe) *(.sframe.*) }
  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
  /* These sections are generated by the Sun/Oracle C++ compiler.  */
  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges*) }
  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
  /* Exception handling  */
  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
  .sframe         : ONLY_IF_RW { *(.sframe) *(.sframe.*) }
  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges*) }
  /* Thread Local Storage sections  */
  .tdata	  :
   {
     PROVIDE_HIDDEN (__tdata_start = .);
     *(.tdata .tdata.* .gnu.linkonce.td.*)
   }
  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
  .preinit_array    :
  {
    PROVIDE_HIDDEN (__preinit_array_start = .);
    KEEP (*(.preinit_array))
    PROVIDE_HIDDEN (__preinit_array_end = .);
  }
  .init_array    :
  {
    PROVIDE_HIDDEN (__init_array_start = .);
    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
    PROVIDE_HIDDEN (__init_array_end = .);
  }
  .fini_array    :
  {
    PROVIDE_HIDDEN (__fini_array_start = .);
    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
    PROVIDE_HIDDEN (__fini_array_end = .);
  }
  .ctors          :
  {
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       is in.  */
    KEEP (*crtbegin.o(.ctors))
    KEEP (*crtbegin?.o(.ctors))
    /* We don't want to include the .ctor section from
       the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
  }
  .dtors          :
  {
    KEEP (*crtbegin.o(.dtors))
    KEEP (*crtbegin?.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
  }
  .jcr            : { KEEP (*(.jcr)) }
  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
  .dynamic        : { *(.dynamic) }
  .got            : { *(.got) *(.igot) }
  . = DATA_SEGMENT_RELRO_END (SIZEOF (.got.plt) >= 24 ? 24 : 0, .);
  .got.plt        : { *(.got.plt) *(.igot.plt) }
  .data           :
  {
    *(.data .data.* .gnu.linkonce.d.*)
    SORT(CONSTRUCTORS)
  }
  .data1          : { *(.data1) }
  _edata = .; PROVIDE (edata = .);
  . = ALIGN(ALIGNOF(NEXT_SECTION));
  __bss_start = .;
  .bss            :
  {
   *(.dynbss)
   *(.bss .bss.* .gnu.linkonce.b.*)
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.
      FIXME: Why do we need it? When there is no .bss section, we do not
      pad the .data section.  */
   . = ALIGN(. != 0 ? 64 / 8 : 1);
  }
  .lbss   :
  {
    *(.dynlbss)
    *(.lbss .lbss.* .gnu.linkonce.lb.*)
    *(LARGE_COMMON)
  }
  . = ALIGN(64 / 8);
  . = SEGMENT_START("ldata-segment", .);
  .lrodata   ALIGN(CONSTANT (MAXPAGESIZE)) + (. & (CONSTANT (MAXPAGESIZE) - 1)) :
  {
    *(.lrodata .lrodata.* .gnu.linkonce.lr.*)
  }
  .ldata   ALIGN(CONSTANT (MAXPAGESIZE)) + (. & (CONSTANT (MAXPAGESIZE) - 1)) :
  {
    *(.ldata .ldata.* .gnu.linkonce.l.*)
    . = ALIGN(. != 0 ? 64 / 8 : 1);
  }
  . = ALIGN(64 / 8);
  _end = .; PROVIDE (end = .);
  . = DATA_SEGMENT_END (.);
  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }
  .comment 0 (INFO) : { *(.comment); LINKER_VERSION; }
  .gnu.build.attributes : { *(.gnu.build.attributes .gnu.build.attributes.*) }
  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */
  /* DWARF 1.  */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }
  /* GNU DWARF 1 extensions.  */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }
  /* DWARF 1.1 and DWARF 2.  */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }
  /* DWARF 2.  */
  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
  /* SGI/MIPS DWARF 2 extensions.  */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }
  /* DWARF 3.  */
  .debug_pubtypes 0 : { *(.debug_pubtypes) }
  .debug_ranges   0 : { *(.debug_ranges) }
  /* DWARF 5.  */
  .debug_addr     0 : { *(.debug_addr) }
  .debug_line_str 0 : { *(.debug_line_str) }
  .debug_loclists 0 : { *(.debug_loclists) }
  .debug_macro    0 : { *(.debug_macro) }
  .debug_names    0 : { *(.debug_names) }
  .debug_rnglists 0 : { *(.debug_rnglists) }
  .debug_str_offsets 0 : { *(.debug_str_offsets) }
  .debug_sup      0 : { *(.debug_sup) }
  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
}


==================================================
/mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/../../../../x86_64-lfs-linux-gnu/bin/ld: mode elf_x86_64
attempt to open /mnt/lfs/lib/../lib/Scrt1.o succeeded
/mnt/lfs/lib/../lib/Scrt1.o
attempt to open /mnt/lfs/lib/../lib/crti.o succeeded
/mnt/lfs/lib/../lib/crti.o
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/crtbeginS.o succeeded
/mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/crtbeginS.o
attempt to open /tmp/cczL9FoG.o succeeded
/tmp/cczL9FoG.o
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libstdc++.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libstdc++.a failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/../../../../x86_64-lfs-linux-gnu/lib/../lib/libstdc++.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/../../../../x86_64-lfs-linux-gnu/lib/../lib/libstdc++.a failed
attempt to open /mnt/lfs/lib/../lib/libstdc++.so succeeded
/mnt/lfs/lib/../lib/libstdc++.so
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libm.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libm.a failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/../../../../x86_64-lfs-linux-gnu/lib/../lib/libm.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/../../../../x86_64-lfs-linux-gnu/lib/../lib/libm.a failed
attempt to open /mnt/lfs/lib/../lib/libm.so succeeded
opened script file /mnt/lfs/lib/../lib/libm.so
/mnt/lfs/lib/../lib/libm.so
opened script file /mnt/lfs/lib/../lib/libm.so
attempt to open /mnt/lfs/usr/lib/libm.so.6 succeeded
/mnt/lfs/usr/lib/libm.so.6
attempt to open /mnt/lfs/usr/lib/libmvec.so.1 succeeded
/mnt/lfs/usr/lib/libmvec.so.1
/mnt/lfs/usr/lib/libmvec.so.1
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libgcc.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libgcc.a succeeded
/mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libgcc.a
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libc.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libc.a failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/../../../../x86_64-lfs-linux-gnu/lib/../lib/libc.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/../../../../x86_64-lfs-linux-gnu/lib/../lib/libc.a failed
attempt to open /mnt/lfs/lib/../lib/libc.so succeeded
opened script file /mnt/lfs/lib/../lib/libc.so
/mnt/lfs/lib/../lib/libc.so
opened script file /mnt/lfs/lib/../lib/libc.so
attempt to open /mnt/lfs/usr/lib/libc.so.6 succeeded
/mnt/lfs/usr/lib/libc.so.6
attempt to open /mnt/lfs/usr/lib/libc_nonshared.a succeeded
/mnt/lfs/usr/lib/libc_nonshared.a
attempt to open /mnt/lfs/usr/lib/ld-linux-x86-64.so.2 succeeded
/mnt/lfs/usr/lib/ld-linux-x86-64.so.2
/mnt/lfs/usr/lib/libc_nonshared.a
/mnt/lfs/usr/lib/ld-linux-x86-64.so.2
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libgcc.so failed
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libgcc.a succeeded
/mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/libgcc.a
attempt to open /mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/crtendS.o succeeded
/mnt/lfs/tools/lib/gcc/x86_64-lfs-linux-gnu/14.2.0/crtendS.o
attempt to open /mnt/lfs/lib/../lib/crtn.o succeeded
/mnt/lfs/lib/../lib/crtn.o
ld-linux-x86-64.so.2 needed by /mnt/lfs/lib/../lib/libstdc++.so
found ld-linux-x86-64.so.2 at /mnt/lfs/usr/lib/ld-linux-x86-64.so.2
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.