Re: Matheus, Brazil kernel 2.6.32-21-generic

Install with
$ sudo dpkg -i agrsm-*.deb
The .deb is essential with the dpkg command

MarvS

On Mon, Mar 7, 2011 at 8:51 PM, Antonio Olivares
<[email protected]> wrote:
> Matheus,
>
> scanModem reports that your modem is supported through LSI 11c11040
> agere modem driver :
>
> From http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>
> Get the packages
> agrsm-11c11040_20091225_i386.deb and for automation & testing the package
> agrsm-tools_0.0.1_all.deb
>
> Install with
> $ sudo dpkg -i agrsm-*
>
> It would be nice if you have dkms enabled/installed for automation of
> newer kernels.  Read the following carefully:
>
> Presently install your Linux Distributions dkms package. It provides
> for automated driver updates,
> following upgrade of your kernel.  For details see
> http://linux.dell.com/projects.shtml#dkms
>
>
>
> Predictive  diagnostics for card in bus 00:1b.0:
>        Modem chipset  detected on
> NAME="Audio device: Intel Corporation 82801I "
> CLASS=0403
> PCIDEV=8086:293e
> SUBSYS=1297:2000
> IRQ=22
> HDA2=00:1b.0
> SOFT=8086:293e.HDA
> HDAchipVendorID=11c1
> CHIP=0x11c11040
> IDENT=agrsm
> Driver=agrsm
> package=agrsm-11c11040
>
>  For candidate modem in:  00:1b.0
>   0403 Audio device: Intel Corporation 82801I
>      Primary device ID:  8086:293e
>    Subsystem PCI_id  1297:2000
>    Softmodem codec or chipset from diagnostics: 0x11c11040
>                               from    Archives:
>                        The HDA card softmodem chip is 0x11c11040
>
>
> Support type needed or chipset: agrsm
>
>
> Writing DOCs/Intel.txt
>
> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
> agrserial driver pair.
> There are a few different chipsets which use this driver pair, but
> they use different code resources:
> Chipsets                        KV*     PackageNames (most current as of November 2009)
> ----------------------------------------------------------------------------------------------
> 11c1:048c and 11c1:048f
> 2.6.29  agrsm048pci-2.1.60_20100108_i386.deb or
> agrsm048pci-2.1.60_20100108.tar.gz
> 11c1:0620                       2.6.31
> agrsm06pci-2.1.80_20100106_i386.deb or
> agrsm06pci-2.1.80~20100106.tar.gz !!
> 11c11040 (on HDA audio cards)   2.6.31
> agrsm-11c11040_20091225_i386.deb or
> agrsm-11c11040-2.1.80~20091225.tar.bz2  !!
>   All available at:
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> Additionally there are;
> automation & testing                    agrsm-tools_0.0.1_all.deb or
> agrsm-tools-0.0.1-2.noarch.rpm
> General background                      agrsm_howto.txt
> ------------------------------------------------------------------------------------------------
> * KV == latest kernel release with a reported success
> !! Latest update with major credit to  Nikolay Zhuravlev
>   But see conflict issue:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
>   For the 11c11040 chip with kernels 2.6.31 and later a change in a
> modules loading settingmay be necessary.
>   Within the file /etc/modprobe.d/alsa-base.conf  (or equivalent for
> your Distro), change the phrase:
>      options snd-hda-intel power_save=10
>   to:
>      options snd-hda-intel power_save=0
>   or the agrsm drivers will not function. For Ubuntu related systems
> this can be done with:
>   $ sudo gedit /etc/modprobe.d/alsa-base.conf
>
> Report from  Bjorn Wielens:
> Please note- trying to load the modules on a OpenSuSE 11.2 system gives
>  an error about the module_version symbol. Using:
> # modprobe --force agrmodem
> # modprobe --force agrserial
> is necessary to load the drivers, and does not appear to cause ill effects.
>
>
> All of the above packages are dkms competent.  This means that if your
> Linux distros dkms package
> is previously installed, if provides for future updates matching
> forthcoming kernels.
>
> -------------- end Agere Systems section -------------------
>
> If you install the driver correctly and the modem is unresponsive
> please read the following carefully should you need extra help:
>
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1b.0        8086:293e       1297:2000       Audio device: Intel Corporation 82801I
>
>  Modem interrupt assignment and sharing:
>  22:        440        836   IO-APIC-fasteoi   HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    0.286020] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9f4000-0xfe9f7fff]
> [    0.286064] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.286068] pci 0000:00:1b.0: PME# disabled
> [   10.382853] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
> low) -> IRQ 22
> [   10.382960] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [   10.500031] input: HDA Digital PCBeep as
> /devices/pci0000:00/0000:00:1b.0/input/input6
> [   10.517489] input: HDA Intel Mic at Ext Front Jack as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> [   10.517563] input: HDA Intel HP Out at Ext Front Jack as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>
>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to [email protected]
>  if help is needed.
>
>
> Regards,
>
>
> Antonio
>
> On Mon, Mar 7, 2011 at 6:46 PM, Matheus Maquiné <[email protected]> wrote:
>>   I want to know how drive (if exists) is compatible with may modem
>> listed on ModemData.txt. If exists, I want where to download and how
>> to install, I want to use it with gnome ppp.
>>
>