which driver for this modem

Hi,

I am a bit stuck trying to set up my dial-up connection under
linux. Can anybody tell me what driver I need and where to get
it?

Thanks for your support,
Kirsten

This is my ModemData.txt:

 Only plain text email is forwarded by the  [email protected] List 
Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-28-generic
 With this Subject Line cogent experts will be alerted, and useful case 
names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in 
YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for 
dialup service.
Responses from [email protected] are sometimes blocked by an 
Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.16
Linux version 2.6.24-28-generic (buildd@palmer) (gcc version 4.2.4 
(Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Nov 24 09:30:14 UTC 2010
 scanModem update of:  2011_02_04

Distrib_ID=Ubuntu
DistribCodeName=hardy


Presently install your Linux Distributions dkms package. It provides for 
automated driver updates,
following upgrade of your kernel.  For details see 
http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
       snd_hda_intel          

Attached USB devices are:
 ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
 ID 413c:0058 Dell Computer Corp.
 ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
 ID 0b97:7761 O2 Micro, Inc.
 ID 413c:a005 Dell Computer Corp.
If a cellphone is not detected, see 
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to [email protected]

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller (rev 01)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup 
diagnostics are:
 PCI slot       PCI ID          SubsystemID     Name
 ----------     ---------       ---------       --------------
 00:1b.0        8086:27d8       1028:01c2       Audio device: Intel 
Corporation 82801G

 Modem interrupt assignment and sharing:
 20:        941          0   IO-APIC-fasteoi   uhci_hcd:usb2, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[  603.060124] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, 
low) -> IRQ 20
[  603.060146] PCI: Setting latency timer of device 0000:00:1b.0 to 64


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-01: STAC92xx Digital : STAC92xx Digital : playback 1 : capture 1
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xefebc000 irq 20

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.24-26-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-21-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-27-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.22-15-generic/ubuntu/media/snd-hda-intel/snd-hda-intel.ko
/lib/modules/2.6.24-25-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-22-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-23-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-24-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-28-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x14f100c3
Revision Id: 0x90000
Modem Function Group: 0x2

 The audio card hosts a softmodem chip:  0x14f12bfa

 14f1 is the Conexant Vendor ID, and 0x14f12bfa a softmodem chipset.
 Get a hsfmodem package through http://www.linuxant.com

If not a Conexant modem, the driver hsfmodem-drivers with its dependent 
drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent 
software. ===

Predictive  diagnostics for card in bus 00:1b.0:
        Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1028:01c2
IRQ=20
HDA2=00:1b.0
SOFT=8086:27d8.HDA
CodecDiagnosed=Conexant_
HDAchipVendorID=14f1
CHIP=0x14f12bfa
CodecClass=14f1
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801G
      Primary device ID:  8086:27d8
    Subsystem PCI_id  1028:01c2
    Softmodem codec or chipset from diagnostics: Conexant_0x14f12bfa
                               from    Archives:
                        The HDA card softmodem chip is 0x14f12bfa
     

Support type needed or chipset: hsfmodem


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source 
package with full speed enabled is available, but requires driver 
compiling. Read DOCs/Conexant.txt


Modem support packages from Linuxant include resources for compiling 
drivers. 
If an installer package matching your kernel_version  is not provided,
just install a generic code package.

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.05full_k2.6.24_28_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above 
procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to 
find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the 
FileName,
your KernelVersion:     2.6.24_28_generic
They can be found through 
http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder 
is OK)
and unzipped with:
        unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm 
permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.2.4
             and the compiler used in kernel assembly: 4.2.4


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-28-generic/build

 However some compilations and executable functions may need additional 
files,
 in the FileNames.h (so called kernel "h"eaders) collection installed 
in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also 
required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev 
packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at 
http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some 
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. 
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to 
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
        -rwsr-xr-- 1 root dip 269256 2007-10-05 05:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
        $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
        sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from 
http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed 
to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble 
shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:  
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to 
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

-- 
Kirsten Winter                                    Tel: +61 7 3365 1629
School of Information Technology                  Fax: +61 7 3365 4999 
      and Electrical Engineering
The University of Queensland             email: [email protected]
Queensland    4072   Australia      http://www.itee.uq.edu.au/~kirsten