Re: Correct modem driver device id 0621 agere systems

Roderick,

scanModem does report that your modem is supported but for 32 bit
version of linux an agrsm driver would serve you modem:

Predictive  diagnostics for card in bus 03:05.0:
	Modem chipset  detected on
NAME="Communication controller: Agere Systems Lucent V.92 Data/Fax Modem"
CLASS=0780
PCIDEV=11c1:0620
SUBSYS=11c1:0621
IRQ=11
HDA2=00:14.2
HDA2=01:05.1
IDENT=agrsm

 For candidate modem in:  03:05.0
   0780 Communication controller: Agere Systems Lucent V.92 Data/Fax Modem
      Primary device ID:  11c1:0620
 Support type needed or chipset:	agrsm




 There is no agrsm software support for x86_64 systems, through the
modem may be
 supported on Intel/i386 installations, which do more slowly servce
x86_64 processors.


The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets			KV*	PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f
2.6.29	agrsm048pci-2.1.60_20100108_i386.deb or
agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620                       2.6.31
agrsm06pci-2.1.80_20100106_i386.deb or
agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards)   2.6.31
agrsm-11c11040_20091225_i386.deb or
agrsm-11c11040-2.1.80~20091225.tar.bz2  !!
   All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing                    agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background                      agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to  Nikolay Zhuravlev
   But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
   For the 11c11040 chip with kernels 2.6.31 and later a change in a
modules loading settingmay be necessary.
   Within the file /etc/modprobe.d/alsa-base.conf  (or equivalent for
your Distro), change the phrase:
      options snd-hda-intel power_save=10
   to:
      options snd-hda-intel power_save=0
   or the agrsm drivers will not function. For Ubuntu related systems
this can be done with:
   $ sudo gedit /etc/modprobe.d/alsa-base.conf

Report from  Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
 an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.


All of the above packages are dkms competent.  This means that if your
Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.

-------------- end Agere Systems section -------------------

If you install 32 bit linux the package:

11c1:0620                       2.6.31  agrsm06pci-2.1.80_20100106_i386.deb

would serve.

Regards,

Antonio

On Tue, May 10, 2011 at 4:28 PM, Roderick Pearson
<[email protected]> wrote:
> I have been searching for the correct driver but I get mixed results
> about it's existences. Please enlighten me.  I have attached my
> ModemData file for perusal.
>
> --
> Roderick Pearson
> 915.996.2040
>