Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?

Hi Antonio!

Indeed, dgcmodem_1.13_i386.deb seemed to install fine without USB modem, 
and I'll gladly go buy me one! (which one though/!?)

I don't quite understand the first part - do you still think I should 
try another hsfmodem package?? I'd love to wrestle with/get some 
response out of that softmodem chip, but haven't we exhausted all 
options as the HowToConexant 11.04 link didn't do the trick? Thanks much,

Jeff




On 08/27/2011 07:21 PM, Antonio Olivares wrote:
> Jeffrey,
>
> You installed this on the VAIO with
>
> Codec: Conexant ID 2c06
> Address: 1
> MFG Function Id: 0x2 (unsol 1)
> Vendor Id: 0x14f12c06
> Subsystem Id: 0x104d1700
> Revision Id: 0x100000
> Modem Function Group: 0x2
>
>   The audio card hosts a softmodem chip:  0x14f12c06
>
>   14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
>   Get a hsfmodem package through http://www.linuxant.com
>
> If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
>
> and how about the one with the usb modem:
>
> have you tried install dgcmodem_1.13_i386.deb?
>
> Regards,
>
> Antonio
>
> On Sat, Aug 27, 2011 at 9:00 PM, Jeffrey Cohan<[email protected]>  wrote:
>> Hi Marv,
>>
>> 1)
>> installing hsfmodem_7.80.02.06full_i386.deb with dpkg, I get
>> "ERROR: Module build failed!
>> Please examine the log file "/etc/hsfmodem/log/buildlog-20110827173945.txt"
>> to determine why."
>>
>> 2)
>> I clicked on the .deb file and reinstalled it through synaptic package
>> manager, and it gave me no eror message, but hsfconfig gave me the error as
>> above. (Module build failed)
>>
>> 3)
>> so I went to the Ubuntu Conexant link. They start by confirming that his HSF
>> modem (USB in this case) is recognized b the system. But how can I do
>> that????
>>
>> ...and after making the substitutions they recommend and running hsfconfig I
>> got the familiar:
>> "Warning: no device detected by hsf driver - HDA modems may require reboot
>> Note: HDA support not compiled in the driver"
>>
>> Can I help it find my device somehow, as ScanModem finds it? Is it certain
>> that this last process can be effective? or might it work only for USB
>> modems? What kind?
>>
>> Many thanks,
>>
>> Jeff
>>
>>
>> -----Original Message-----
>> From: Jeffrey Cohan<[email protected]>
>> To: [email protected]
>> Cc: [email protected]; [email protected]
>> Sent: Sat, Aug 27, 2011 3:29 pm
>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>
>> Hi Marv,
>>
>> I actually never had a
>> /usr/lib/hcfpcimodem/
>> folder on my system. I misled you by giving in my email the list of
>> substitutions that Jonathan gave, instead of the ones I ACTUALLY did for
>> which I substituted  /hsfmodem/  (the same files existed in this folder).
>> Sorry. But perhaps it is a good idea to clean up - I'll do so and reinstall!
>> Should I follow the substitution advice from the 11.04 link on the
>> DialupModemHowtoConexant page as before? If I don't hear from you I'll try
>> installing it before and then after these fixes.
>> Thanks,
>> Jeff
>>
>> (and I could reinstall Ubuntu if you think I might have corrupted something)
>>
>>
>> -----Original Message-----
>> From: Marvin Stodolsky<[email protected]>
>> To: Jeffrey Cohan<[email protected]>
>> Cc: [email protected]; [email protected]
>> Sent: Sat, Aug 27, 2011 2:56 pm
>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>
>> Jeff
>>
>> Installing the hsfmodem on my System, there was not created a folder
>>   /usr/lib/hcfpcimodem/
>> So some odd remnants seem to be on your System
>>
>> I suggest doing uninstalls on all your modem packages , just to clean up
>> To get the Names for the uninstalls, do
>> $ sudo apt-cache search hsf
>> which will display the installaled package Name
>> Then
>> $ sudo apt-get remove Name
>> will uninstall it.
>>
>> Repeat with:
>> $ sudo apt-cache search hcf
>> etc.
>>
>> Then please again try the install of the  hsfmodem package
>>
>> MarvS
>>
>> On Sat, Aug 27, 2011 at 5:31 PM, Jeffrey Cohan<[email protected]>  wrote:
>>> Hi Marv,
>>>
>>> Actually the HP is the 64-bit machine withthe 11c11040 chip. On the VAIO I
>>> did use
>>> hsfmodem-7.80.02.06full.tar.gz
>>> which I'm guessing is correct for the 32-bit Vaio, and I followed exactly
>>> the instructions on the "for Ubuntu 11.04" link on the
>>> DialupModemHowtoConexant page, making substitutions called for, and got
>>> "Warning: no device detected by hsf driver - HDA modems may require
>>> reboot"
>>> and "Note: HDA support not compiled in the driver"
>>>   - exactly as when I had previously followed Jonathan's slightly different
>>> substitutions. Ah, you were confused as I did in fact make these changes
>>> in
>>> the hsfmodem folder and not an hcfmodem folder, which I did not have.
>>>
>>> But perhaps I did successfully install the USB modem package? (see last
>>> email) Hope so...
>>>
>>> Jeff
>>>
>>>
>>> -----Original Message-----
>>> From: Marvin Stodolsky<[email protected]>
>>> To: Jeffrey Cohan<[email protected]>; Linmodems
>>> <[email protected]>
>>> Sent: Sat, Aug 27, 2011 1:58 pm
>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>
>>> Jeff
>>>
>>> Let's summarize and clarify some issues.
>>> With respect to the VIAO PC x86_64 , with the 11c11040 modem chip
>>> there is no support. If you want to install the 32 bit Ubuntu variant on
>>> this PC
>>> there may be support.  We haven't had a clean test since Antonio did a
>>> code update,
>>> but compilng is OK on Ubuntu Natty 32 bit
>>>
>>> With respect to the HP PC with the the Conexant chip modem,
>>> the code package which you should be using is
>>> hsfmodem-7.80.02.06x86_64full.tar.gz,
>>> obtained from the bottom of
>>> http://www.linuxant.com/drivers/hsf/full/downloads.php
>>>
>>> Is this the package on which you are having the compile problems?
>>>
>>> I am confused about your description of the attempted fixes,
>>> because they were done on files like
>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>> but that is hcfpcimodem code, while cogent changes if any should be on
>>> a hsfmodem code
>>>
>>> MarvS
>>>
>>>
>>> On Sat, Aug 27, 2011 at 4:43 PM, Jeffrey Cohan<[email protected]>
>>> wrote:
>>>> Hi Antonio!
>>>>
>>>> in response I get
>>>> GNU grep 2.6.3
>>>> License GPLv3+: GNU GPL version 3 or later
>>>>
>>>> ...so all is ok?  I'm trying to install dgcmodem_1.13_i386.deb which I
>>>> have
>>>> unzipped but can't yet get dpkg to work (I get "dpkg: error: need an
>>>> action
>>>> option") and will let you know how it goes. Again, I'd be happy to
>>>> re-install Ubuntu if necessary.
>>>>
>>>> Jeff
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Antonio Olivares<[email protected]>
>>>> To: Jeffrey Cohan<[email protected]>
>>>> Cc: [email protected]; [email protected];
>>>> [email protected]
>>>> Sent: Sat, Aug 27, 2011 1:20 pm
>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>>
>>>> Jeffrey,
>>>>
>>>> I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc'
>>>> hen gcc --version like
>>>>
>>>> [olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc'
>>>> [    0.000000] Linux version 2.6.40-4.fc15.i686
>>>> ([email protected]) (gcc version 4.6.0 20110530
>>>> (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011
>>>> [olivares@acer-aspire-1 ~]$ gcc --version
>>>> gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10)
>>>> Copyright (C) 2011 Free Software Foundation, Inc.
>>>> This is free software; see the source for copying conditions.  There is
>>>> NO
>>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
>>>> PURPOSE.
>>>>
>>>> [olivares@acer-aspire-1 ~]$
>>>>
>>>> Notice that the gcc versions do match :)
>>>>
>>>> You may pursue to try Marv's suggestion linuxant's usb drivers and see
>>>> if they work.
>>>>
>>>> Regards,
>>>>
>>>> Antonio
>>>>
>>>> On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan<[email protected]>
>>>> wrote:
>>>>> Antonio, here's what I get - do these correspond?
>>>>>
>>>>> uname -a
>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul
>>>>> 29
>>>>> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux
>>>>>
>>>>> gcc --version
>>>>> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>>>>> Copyright (C) 2010 Free Software Foundation, Inc.
>>>>>
>>>>> I'll gladly reinstall anything! and will look at your other options as
>>>>> well.
>>>>> Thanks,
>>>>>
>>>>> Jeffrey
>>>>> - - - - - -
>>>>>
>>>>> Jeffrey,
>>>>>
>>>>> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan<[email protected]>
>>>>> wrote:
>>>>>
>>>>>> Good morning Antonio! I found something from you about the USRobotics
>>>>>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu
>>>>>> 11.04?
>>>>>> I
>>>>>> don't find anything on the web that confirms that any other USB modem
>>>>>> does
>>>>>> work. Or a replacement internal one for the VAIO?
>>>>>>
>>>>>> I'm reluctant to install an older Ubuntu version as you suggest Marv as
>>>>>> sooner or later it would not be supported, because it would take so
>>>>>> much
>>>>>> time to go back and forth unless one version can be accessed within
>>>>>> another
>>>>>> (at home I have only dial-up and use it many times each day) and
>>>>>> because
>>>>>> of
>>>>>> a potential problem with Thunderbird: due to family needs I go between
>>>>>> the
>>>>>> 2
>>>>>> laptops (I can check email via wifi when not at home), must keep my
>>>>>> Thunderbird profile on an external drive, and the profile has been
>>>>>> severely
>>>>>> compromised when accessed through different systems/versions (I'd like
>>>>>> to
>>>>>> have the latest Ubuntu on both machines, and do need to use both to run
>>>>>> ALL
>>>>>> of my software). If it were for the occasional fax, this option would
>>>>>> be
>>>>>> fine.
>>>>>>
>>>>> Maybe you can install an older kernel, for the meantime to give some
>>>>> time for a fix.
>>>>>
>>>>>> So I'll assume that the message:
>>>>>> no device detected by hsf driver - HDA modems may require reboot
>>>>>> Note: HDA support not compiled in the driver
>>>>>>
>>>>>> ...leads me too a dead end. On both computers, alas.
>>>>>>
>>>>>> On this page:
>>>>>> https://help.ubuntu.com/community/DialupModemHowto/Conexant
>>>>>> shouldn't this link:
>>>>>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this
>>>>>> thread.
>>>>>> :
>>>>>> http://ubuntuforums.org/showthread.php?t=1781268
>>>>>> be removed? or why would it not work in my case?
>>>>>>
>>>>> Might be due to some kernel problem* , kernel devel package/kernel
>>>>> headers, some type of mismatch when I see the errors in the messages
>>>>> that you have sent us:
>>>>>
>>>>> <quote>
>>>>>     alsa-driver-linuxant_1.0.23.1_all.deb:
>>>>> ----in terminal:
>>>>> Building modules for the 2.6.38-11-generic kernel, please wait... done.
>>>>> ERROR: Build failed. Please review the build log at
>>>>> /tmp/alsa-driver-linuxant.26528.log
>>>>> dpkg: error processing alsa-driver-linuxant (--install):
>>>>>   subprocess installed post-installation script returned error exit
>>>>> status
>>>>> 2
>>>>> ----in log file:
>>>>> checking for GCC version... Kernel compiler:  Used compiler: gcc
>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
>>>>> *** Assuming the same compiler is used with the current system compiler.
>>>>> *** Please make sure that the same compiler version was used for
>>>>> building kernel.
>>>>> and later...
>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
>>>>> ‘snd_pcm_hw_params’:
>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error:
>>>>> implicit declaration of function ‘pm_qos_remove_requirement’
>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error:
>>>>> implicit declaration of function ‘pm_qos_add_requirement’
>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1
>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>>>> make: *** [compile] Error 2
>>>>> </quote>
>>>>>
>>>>> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED
>>>>> *** Assuming the same compiler is used with the current system compiler.
>>>>> *** Please make sure that the same compiler version was used for
>>>>> building kernel.
>>>>> '' is the one that makes me believe that the running kernel is not the
>>>>> same gcc as the one in the system.  In this case and in others it is
>>>>> important that the running kernel and the gcc be the same so that no
>>>>> errors occurs.  If you can you can confirm
>>>>>
>>>>> run
>>>>> $ uname -a
>>>>> and
>>>>> $ gcc --version
>>>>>
>>>>> and that may tell us why things are not working.  To get it working,
>>>>> the kernel and the gcc must be the same.
>>>>>
>>>>> If you want and have access to a livecd like
>>>>> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to
>>>>> get a connection to internet via dialup.  Puppy in many cases has out
>>>>> of box support for many winmodems.  In porteus I have successfully
>>>>> built some buildscripts to build a module that will make the modems
>>>>> work.  Some modems except the hsf/hcf modems since these are
>>>>> proprietary, except for the 14 kbps one but that one many people would
>>>>> get mad in the case that it is built(they would want full speed, and
>>>>> it is a difficult to accomodate to many people*).  One person built
>>>>> such a module for slax, but I have no status for it as Slax has not
>>>>> been updated for a while.  Without screwing up your running system
>>>>> and/or installing again you may try out one livecd(if you can get one)
>>>>> and try the driver and see if you can make the modem work and connect
>>>>> via dialup or install a kernel that matches gcc and try the fixes
>>>>> again.
>>>>>
>>>>> * unless you have a Dell machine, then you can use the oem drivers and
>>>>> you can get full speed on the modem.
>>>>>
>>>>> If you have a cell phone, you may also use it as a modem to connect to
>>>>> internet.  In ModemData.txt, there is a report you can see :
>>>>>
>>>>> If a cellphone is not detected, see
>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html
>>>>> A sample report is:
>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>>>>
>>>>> Don't get discouraged, a little bit of patience can go a long way.  I
>>>>> almost forgot, you can also virtualize a version of linux and with an
>>>>> older kernel you can run an older installation along with your current
>>>>> one and have a working dialup connection on that one with a working
>>>>> driver.  These are things you can take a look at.
>>>>>
>>>>> When there were no fixes for smartlink modem after kernel 2.6.30/31, I
>>>>> used Slax livecd with older kernel to access the internet and then
>>>>> later the fixes came along thanks to a person that figured things out.
>>>>>   You may try to do something similar and not be left without internet
>>>>> for a fix to come in the meantime.  Hang in there!  You can do it.
>>>>>
>>>>> Regards,
>>>>>
>>>>>
>>>>>
>>>>> Antonio
>>>>>
>>>>>> I've much appreciated your advice - thanks!
>>>>>>
>>>>>> Jeff
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: [email protected]
>>>>>> To: [email protected]; [email protected];
>>>>>> [email protected]; [email protected]
>>>>>> Sent: Fri, Aug 26, 2011 7:23 pm
>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>>>>
>>>>>> Thank you Antonio and Marv - really appreciate it!
>>>>>>
>>>>>> After another full day I'll try to take your advice tomorrow Marv, and
>>>>>> it
>>>>>> seems from Ganton at
>>>>>> http://ubuntuforums.org/showthread.php?t=1597605&page=4
>>>>>> that the most recent kernel that will work will be Ubuntu 10.10. Or
>>>>>> could
>>>>>> I
>>>>>> buy an external modem on ebay that is said to work on Linux? If you
>>>>>> have
>>>>>> further ideas after reading what follows (especially, re "Warning: no
>>>>>> device
>>>>>> detected by hsf driver - HDA modems may require reboot" and "Note: HDA
>>>>>> support not compiled in the driver"), I would be most grateful!
>>>>>>
>>>>>> Today I removed alsa-driver-linuxant and installed
>>>>>> hsfmodem-7.80.02.06full,
>>>>>> and got code similar to yours Antonio.
>>>>>>
>>>>>> But an "hsfconfig" resulted in (excerpts):
>>>>>> Conexant HSF softmodem driver, version 7.80.02.06full
>>>>>> When reporting a problem for the first time, please send
>>>>>> us the file generated by "hsfconfig --dumpdiag".
>>>>>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP
>>>>>> ...and the punchline:
>>>>>> ERROR: Module build failed!
>>>>>> - - -
>>>>>> buildlog excerpts:
>>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here
>>>>>> (not
>>>>>> in a function)
>>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>>>>>>
>>>>>> so I again did this:
>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>>>>> replace .ioctl with .compat_ioctl in:
>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>>>>>
>>>>>> and "hsfconfig" got...
>>>>>> Warning: no device detected by hsf driver - HDA modems may require
>>>>>> reboot
>>>>>> Note: HDA support not compiled in the driver
>>>>>>
>>>>>> then I ran everything (whew!) from "Ganton's Avatar" at
>>>>>> http://ubuntuforums.org/showthread.php?t=1781268
>>>>>> and again got exactly the same message with "hsfconfig"
>>>>>> (issue not [SOLVED] as stated)
>>>>>>
>>>>>> with another hsfconfig, it asked
>>>>>> Warning: existing driver modules found under:
>>>>>>      /lib/modules/2.6.38-11-generic/
>>>>>> Would you like to keep using them? [no]
>>>>>> ...and I pressed [enter]
>>>>>> but got similar results
>>>>>> -  -  - (end of exploits for the day, besides a little blackberry
>>>>>> picking)-
>>>>>> - - - - -
>>>>>>
>>>>>> Thanks again for helping,
>>>>>>
>>>>>> Jeff
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Antonio Olivares<[email protected]>
>>>>>> To: [email protected]
>>>>>> Cc: [email protected]; Linuxant support (Jonathan)
>>>>>> <[email protected]>; Marvin Stodolsky<[email protected]>
>>>>>> Sent: Thu, Aug 25, 2011 6:56 pm
>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Jeffrey,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Something is strange.  I try the package (hsf) and it runs for me, I
>>>>>>
>>>>>>
>>>>>>
>>>>>> can't find errors:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install'
>>>>>>
>>>>>>
>>>>>>
>>>>>> Password:
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Entering directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>>>>>
>>>>>>
>>>>>>
>>>>>> mkdir -m 755 -p cvt
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n
>>>>>>
>>>>>>
>>>>>>
>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2<  "inf/hsf.cty";
>>>>>>
>>>>>>
>>>>>>
>>>>>> else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfpcibasic2/Region&&  grep -v -l '*' *NAME | sed -e 's/^0//'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>>> ' ',' | sed -e 's/,$//' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^/"/' -e 's/$/"/' ; echo "")>  cvt/hsfpcibasic2/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n
>>>>>>
>>>>>>
>>>>>>
>>>>>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart<  ""; else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf
>>>>>>
>>>>>>
>>>>>>
>>>>>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfpcibasic2smart/Region&&  grep -v -l '*' *NAME | sed -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr'
>>>>>> ' ',' | sed -e 's/,$//'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")>
>>>>>>
>>>>>>
>>>>>>
>>>>>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n
>>>>>>
>>>>>>
>>>>>>
>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi<
>>>>>>
>>>>>>
>>>>>>
>>>>>> "inf/hsf.cty"; else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -rf cvt/hsfpcibasic2hsfi/Region
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfpcibasic2hsfi/Region&&  grep -v -l '*' *NAME | sed -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr'
>>>>>> ' ',' | sed -e 's/,$//'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")>
>>>>>>
>>>>>>
>>>>>>
>>>>>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n
>>>>>>
>>>>>>
>>>>>>
>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry<  "inf/hsf.cty";
>>>>>>
>>>>>>
>>>>>>
>>>>>> else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -rf cvt/hsfpcibasic2bry/Region
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfpcibasic2bry/Region&&  grep -v -l '*' *NAME | sed -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr'
>>>>>> ' ',' | sed -e 's/,$//'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")>
>>>>>>
>>>>>>
>>>>>>
>>>>>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n
>>>>>>
>>>>>>
>>>>>>
>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3<  "inf/hsf.cty";
>>>>>>
>>>>>>
>>>>>>
>>>>>> else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -rf cvt/hsfpcibasic3/Region
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfpcibasic3/Region&&  grep -v -l '*' *NAME | sed -e 's/^0//'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>>> ' ',' | sed -e 's/,$//' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^/"/' -e 's/$/"/' ; echo "")>  cvt/hsfpcibasic3/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then
>>>>>>
>>>>>>
>>>>>>
>>>>>> ./cvtinf.pl cvt/hsfmc97<  ""; else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -f mc97/HW_ADAPTER_TYPE
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfmc97/Region&&  grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^0//' -e 's/_NAME$//' | tr'
>>>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/$/"/' ; echo "")>  cvt/hsfmc97/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then
>>>>>>
>>>>>>
>>>>>>
>>>>>> ./cvtinf.pl cvt/hsfcadmus2<  ""; else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -f cadmus2/HW_ADAPTER_TYPE
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfcadmus2/Region&&  grep -v -l '*' *NAME | sed -e 's/^0//'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>>> ' ',' | sed -e 's/,$//' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^/"/' -e 's/$/"/' ; echo "")>  cvt/hsfcadmus2/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n ""
>>>>>>
>>>>>>
>>>>>>
>>>>>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart<  ""; else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -f cadmus2smart/HW_ADAPTER_TYPE
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfcadmus2smart/Region&&  grep -v -l '*' *NAME | sed -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr'
>>>>>> ' ',' | sed -e 's/,$//'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")>
>>>>>>
>>>>>>
>>>>>>
>>>>>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'<
>>>>>>
>>>>>>
>>>>>>
>>>>>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then
>>>>>>
>>>>>>
>>>>>>
>>>>>> ./cvtinf.pl cvt/hsfhda<  ""; else true; fi
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -f hda/HW_ADAPTER_TYPE
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/.
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd cvt/hsfhda/Region&&  grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's/^0//' -e 's/_NAME$//' | tr'
>>>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>>>>>
>>>>>>
>>>>>>
>>>>>> -e 's/$/"/' ; echo "")>  cvt/hsfhda/COUNTRY_CODE_LIST
>>>>>>
>>>>>>
>>>>>>
>>>>>> cd cvt&&  find . -type f ! -empty -exec md5sum {} ';' | sort |
>>>>>>
>>>>>>
>>>>>>
>>>>>> while read sum file ; do
>>>>>>
>>>>>>
>>>>>>
>>>>>>      if [ "$sum" = "$prevsum" ]&&  cmp -s "$file" "$prevfile"; then
>>>>>>
>>>>>>
>>>>>>
>>>>>>          rm -f "$file";
>>>>>>
>>>>>>
>>>>>>
>>>>>>          if ! ln "$prevfile" "$file"; then
>>>>>>
>>>>>>
>>>>>>
>>>>>>              echo 2>&1 "$0: ln FAILED - recreate $file based on
>>>>>> $prevfile";
>>>>>>
>>>>>>
>>>>>>
>>>>>>              exit 1;
>>>>>>
>>>>>>
>>>>>>
>>>>>>          fi;
>>>>>>
>>>>>>
>>>>>>
>>>>>>      else
>>>>>>
>>>>>>
>>>>>>
>>>>>>          prevsum="$sum";
>>>>>>
>>>>>>
>>>>>>
>>>>>>          prevfile="$file";
>>>>>>
>>>>>>
>>>>>>
>>>>>>      fi;
>>>>>>
>>>>>>
>>>>>>
>>>>>> done
>>>>>>
>>>>>>
>>>>>>
>>>>>> touch cvt/.linksame
>>>>>>
>>>>>>
>>>>>>
>>>>>> mkdir -m 755 -p /etc/hsfmodem/nvm
>>>>>>
>>>>>>
>>>>>>
>>>>>> cd cvt&&  (find  hsfpcibasic2  hsfpcibasic2smart  hsfpcibasic2hsfi
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfpcibasic2bry  hsfpcibasic3  hsfmc97  hsfmc97ali  hsfmc97ati
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfmc97ich  hsfmc97sis  hsfmc97via  hsfcadmus2  hsfcadmus2smart
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm)
>>>>>>
>>>>>>
>>>>>>
>>>>>> 127 blocks
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Leaving directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Entering directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRIVER@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTTARGET@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTARCH@!i386!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERDEV@!HSF!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMAXMDM@!8!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUX_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      <  patcher.in>  patcher
>>>>>>
>>>>>>
>>>>>>
>>>>>> chmod --reference=patcher.in patcher
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -s cnxtconfig.in hsfconfig.in
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRIVER@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTTARGET@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTARCH@!i386!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERDEV@!HSF!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMAXMDM@!8!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUX_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      <  hsfconfig.in>  hsfconfig
>>>>>>
>>>>>>
>>>>>>
>>>>>> chmod --reference=hsfconfig.in hsfconfig
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -s cnxtstop.in hsfstop.in
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRIVER@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTTARGET@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTARCH@!i386!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERDEV@!HSF!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMAXMDM@!8!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUX_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      <  hsfstop.in>  hsfstop
>>>>>>
>>>>>>
>>>>>>
>>>>>> chmod --reference=hsfstop.in hsfstop
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -s cnxtmodconflicts.in hsfmodconflicts.in
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRIVER@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTTARGET@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTARCH@!i386!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERDEV@!HSF!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMAXMDM@!8!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUX_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      <  hsfmodconflicts.in>  hsfmodconflicts
>>>>>>
>>>>>>
>>>>>>
>>>>>> chmod --reference=hsfmodconflicts.in hsfmodconflicts
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -s cnxtdcpd.in hsfdcpd.in
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRIVER@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTTARGET@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTARCH@!i386!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERDEV@!HSF!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMAXMDM@!8!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUX_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      <  hsfdcpd.in>  hsfdcpd
>>>>>>
>>>>>>
>>>>>>
>>>>>> chmod --reference=hsfdcpd.in hsfdcpd
>>>>>>
>>>>>>
>>>>>>
>>>>>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin
>>>>>>
>>>>>>
>>>>>>
>>>>>> ln -s rccnxt.in rchsf.in
>>>>>>
>>>>>>
>>>>>>
>>>>>> sed
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRIVER@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTTARGET@!hsf!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTARCH@!i386!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERDEV@!HSF!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMAXMDM@!8!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUX_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>>
>>>>>>
>>>>>>
>>>>>>      <  rchsf.in>  rchsf
>>>>>>
>>>>>>
>>>>>>
>>>>>> chmod --reference=rchsf.in rchsf
>>>>>>
>>>>>>
>>>>>>
>>>>>> mkdir -m 755 -p /usr/lib/hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> install -m 700 rchsf /usr/lib/hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Leaving directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Entering directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>>>>>
>>>>>>
>>>>>>
>>>>>> rm -rf "/usr/lib/hsfmodem/config.mak"
>>>>>>
>>>>>>
>>>>>>
>>>>>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules"
>>>>>>
>>>>>>
>>>>>>
>>>>>> mkdir -m 755 -p /usr/lib/hsfmodem/modules
>>>>>>
>>>>>>
>>>>>>
>>>>>> (cd ..&&  find config.mak modules/imported -depth -print | cpio -pdmu
>>>>>>
>>>>>>
>>>>>>
>>>>>> /usr/lib/hsfmodem)
>>>>>>
>>>>>>
>>>>>>
>>>>>> 5892 blocks
>>>>>>
>>>>>>
>>>>>>
>>>>>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name
>>>>>>
>>>>>>
>>>>>>
>>>>>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu
>>>>>>
>>>>>>
>>>>>>
>>>>>> /usr/lib/hsfmodem/modules
>>>>>>
>>>>>>
>>>>>>
>>>>>> 3712 blocks
>>>>>>
>>>>>>
>>>>>>
>>>>>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules
>>>>>>
>>>>>>
>>>>>>
>>>>>> 0 blocks
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Leaving directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Entering directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Nothing to be done for `install'.
>>>>>>
>>>>>>
>>>>>>
>>>>>> make[1]: Leaving directory
>>>>>>
>>>>>>
>>>>>>
>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>>>>>
>>>>>>
>>>>>>
>>>>>> mkdir -p /etc/hsfmodem/log
>>>>>>
>>>>>>
>>>>>>
>>>>>> install -m 444 LICENSE /usr/lib/hsfmodem
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> To complete the installation and configuration of your modem,
>>>>>>
>>>>>>
>>>>>>
>>>>>> please run "hsfconfig" (or "/usr/sbin/hsfconfig")
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Might it be with Ubuntu?  I used generic package with
>>>>>>
>>>>>>
>>>>>>
>>>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a
>>>>>>
>>>>>>
>>>>>>
>>>>>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2011 i686 i686 i386 GNU/Linux
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Maybe Marv can test to find out what could be wrong?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Antonio
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares
>>>>>>
>>>>>>
>>>>>>
>>>>>> <[email protected]>  wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Jeffrey,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> In the case you provided, you installed/tried to install the
>>>>>>
>>>>>>
>>>>>>> alsa-linuxant package?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> You may not have needed this package.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> You do have kernel sources and compiler ready.  However, the
>>>>>>
>>>>>>
>>>>>>> replacements on the hsfmodem would differ with the ones suggested by
>>>>>>
>>>>>>
>>>>>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after
>>>>>>
>>>>>>
>>>>>>> you have detected where it bombs out or wait a bit till they(Linuxant)
>>>>>>
>>>>>>
>>>>>>> patch up the code and make it ready to work.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> If someone has suggestions, please forward them to Jeffrey.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Regards,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Antonio
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On Thu, Aug 25, 2011 at 5:15 PM,<[email protected]>  wrote:
>>>>>>
>>>>>>
>>>>>>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit
>>>>>>>> VAIO
>>>>>>
>>>>>>
>>>>>>>> VGN-N130G and will attach ModemData.txt again.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial
>>>>>>>> does
>>>>>>
>>>>>>
>>>>>>>> not find a modem:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>>>>>
>>>>>>
>>>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>>>>>
>>>>>>
>>>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>>>>>
>>>>>>
>>>>>>>> replace .ioctl with .compat_ioctl in:
>>>>>>
>>>>>>
>>>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install
>>>>>>>> with
>>>>>>
>>>>>>
>>>>>>>> errors, even when I remove them and re-install. Here are excerpts:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>      alsa-driver-linuxant_1.0.23.1_all.deb:
>>>>>>
>>>>>>
>>>>>>>> ----in terminal:
>>>>>>
>>>>>>
>>>>>>>> Building modules for the 2.6.38-11-generic kernel, please wait...
>>>>>>>> done.
>>>>>>
>>>>>>
>>>>>>>> ERROR: Build failed. Please review the build log at
>>>>>>
>>>>>>
>>>>>>>> /tmp/alsa-driver-linuxant.26528.log
>>>>>>
>>>>>>
>>>>>>>> dpkg: error processing alsa-driver-linuxant (--install):
>>>>>>
>>>>>>
>>>>>>>>   subprocess installed post-installation script returned error exit
>>>>>>>> status
>>>>>>>> 2
>>>>>>
>>>>>>
>>>>>>>> ----in log file:
>>>>>>
>>>>>>
>>>>>>>> checking for GCC version... Kernel compiler:  Used compiler: gcc
>>>>>>
>>>>>>
>>>>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>>>>>>
>>>>>>
>>>>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
>>>>>>
>>>>>>
>>>>>>>> *** Assuming the same compiler is used with the current system
>>>>>>>> compiler.
>>>>>>
>>>>>>
>>>>>>>> *** Please make sure that the same compiler version was used for
>>>>>>>> building
>>>>>>
>>>>>>
>>>>>>>> kernel.
>>>>>>
>>>>>>
>>>>>>>> and later...
>>>>>>
>>>>>>
>>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
>>>>>>
>>>>>>
>>>>>>>> ‘snd_pcm_hw_params’:
>>>>>>
>>>>>>
>>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error:
>>>>>>>> implicit
>>>>>>
>>>>>>
>>>>>>>> declaration of function ‘pm_qos_remove_requirement’
>>>>>>
>>>>>>
>>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error:
>>>>>>>> implicit
>>>>>>
>>>>>>
>>>>>>>> declaration of function ‘pm_qos_add_requirement’
>>>>>>
>>>>>>
>>>>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error
>>>>>>>> 1
>>>>>>
>>>>>>
>>>>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
>>>>>>
>>>>>>
>>>>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
>>>>>>
>>>>>>
>>>>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>>>>>
>>>>>>
>>>>>>>> make: *** [compile] Error 2
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>      hsfmodem_7.80.02.06full_i386.deb:
>>>>>>
>>>>>>
>>>>>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame
>>>>>>>> size
>>>>>>>> of
>>>>>>
>>>>>>
>>>>>>>> 1028 bytes is larger than 1024 bytes
>>>>>>
>>>>>>
>>>>>>>>    CC [M]  /usr/lib/hsfmodem/modules/osstdio.o
>>>>>>
>>>>>>
>>>>>>>>    CC [M]  /usr/lib/hsfmodem/modules/osnvm.o
>>>>>>
>>>>>>
>>>>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared
>>>>>>>> here
>>>>>>>> (not
>>>>>>
>>>>>>
>>>>>>>> in a function)
>>>>>>
>>>>>>
>>>>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>>>>>>
>>>>>>
>>>>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>>>>>>
>>>>>>
>>>>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>>>>>
>>>>>>
>>>>>>>> make: *** [all] Error 2
>>>>>>
>>>>>>
>>>>>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and
>>>>>>>> the
>>>>>>
>>>>>>
>>>>>>>> buildlog files
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> 3) $ uname -a (Jonathan had asked someone for this) gets:
>>>>>>
>>>>>>
>>>>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri
>>>>>>>> Jul
>>>>>>>> 29
>>>>>>
>>>>>>
>>>>>>>> 19:05:14 UTC 2011 i68
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't
>>>>>>>> remember
>>>>>>>> how
>>>>>>
>>>>>>
>>>>>>>> I did it. Is it possible that it CAN'T be done in 11.04?!
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> I'm not sure if any of this will be of use to you, but am
>>>>>>>> particularly
>>>>>>
>>>>>>
>>>>>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is
>>>>>>>> 2)
>>>>>>>> an
>>>>>>
>>>>>>
>>>>>>>> issue? Also would it have been important to reboot at certain points?
>>>>>>>> Should
>>>>>>
>>>>>>
>>>>>>>> I install a new modem in either beast? I so depend on dial-up! Many
>>>>>>>> thanks!
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Jeffrey
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>
>>>>>>
>>>>>>>> From: Antonio Olivares<[email protected]>
>>>>>>
>>>>>>
>>>>>>>> To: Jeffrey Cohan<[email protected]>
>>>>>>
>>>>>>
>>>>>>>> Cc: [email protected]
>>>>>>
>>>>>>
>>>>>>>> Sent: Wed, Aug 24, 2011 7:17 pm
>>>>>>
>>>>>>
>>>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Jeffrey,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it
>>>>>>>> would
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> be a nice opportunity for you to check the modified driver *to see if
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> it would work*, but since it is 64 bit you get the message directly
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> from ModemData.txt
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> There is no agrsm software support for x86_64 systems, through the
>>>>>>>> modem
>>>>>>>> may
>>>>>>
>>>>>>
>>>>>>>> be
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>   supported on Intel/i386 installations, which do more slowly servce
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> x86_64 processors.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> * driver
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> + new agrsm tools
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> For the other modem, Jonathan at Linuxant has posted ways to
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> circumvent the errors:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> <quote>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Hi,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> this is a known build issue with recent kernels, even with the latest
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> release of the driver. A used provided the following workaround to
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> solve it:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> ---
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> replace .ioctl with .compat_ioctl in:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> ---
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> This build problem will be fixed in a future release of the driver.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Regards,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Jonathan
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Technical specialist / Linuxant
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> www.linuxant.com
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> [email protected]
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> </quote>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> So you may try the fixes suggested by Jonathan in the meantime.  Or
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> you have the option to try the driver 11c11040 but on 32 bit linux.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Hopefully you can get one of these modems to work.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Regards,
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> Antonio
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan<[email protected]>
>>>>>>>> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> I have spent many many hours trying to get dial-up working on two
>>>>>>>>> laptops
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> and would so appreciate your help. Dial-up on either one would be
>>>>>>>>> just
>>>>>>
>>>>>>
>>>>>>>>> fine.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I
>>>>>>>>> found
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> this:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86
>>>>>>>>> system
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core
>>>>>>>>> in
>>>>>>>>> the
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> code compiled for x86 systems."
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of
>>>>>>>>> Ubuntu
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> before upgrading.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> I can't seem to find an appropriate driver at www.linuxant.com for
>>>>>>>>> my
>>>>>>
>>>>>>
>>>>>>>>> Linux
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> version 2.6.38-11-generic.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> Alsa-driver-linuxant doesn't seem to be properly installed.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> I get this error message:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> ERROR: Module build failed!
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> Please examine the log file
>>>>>>
>>>>>>
>>>>>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt"
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> to determine why.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> dpkg: error processing alsa-driver-linuxant (--configure):
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>   subprocess installed post-installation script returned error exit
>>>>>>>>> status
>>>>>>
>>>>>>
>>>>>>>>> 2
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> Errors were encountered while processing:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>   alsa-driver-linuxant
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> ===============
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> Thanks much!
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> Jeff
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>