Re: please help

Hasham,

First of all you would need to have Development Tools installed.  If
there would way for you to have internet access on that machine
# yum groupinstall "Development Tools"
to install a compiler and some needed libraries.  Otherwise, you would
have to hunt them down or install from install DVD if it is at hand.
Then a kernel-devel package for your running kernel would need to be
installed.  Again with internet connection ready, you would do a
# yum install kernel-devel
and install the required package.

After this, you would have to hunt down the package I have suggested
previously and extract the file and proceed to read the install
file/README to proceed.  However, the compiler and kernel-devel
package need to be installed if the modem driver is to have a chance
to work on your machine.

Hope this helps in some way,

Antonio

On Tue, Dec 13, 2011 at 2:10 PM, Hesham M.Hafez <[email protected]> wrot=
e:
> On 12/13/2011 09:37 PM, Antonio Olivares wrote:
>>
>> Hashem,
>>
>> Forgot to add you may need to add kernel-devel package and Development
>> Tools to compile the driver as I did not see the lines:
>>
>> ----------------------------
>> =A0The kernel was compiled with gcc version 4.4.4 and a compiler is not
>> installed
>>
>> =A0linux-headers-2.6.32-71.el6.i686 resources needed for compiling are
>> not manifestly ready!
>>
>> =A0If compiling is necessary packages must be installed, providing:
>> =A0 =A0 =A0 =A0gcc-4.4 =A0kernel-source-2.6.32-71.el6.i686
>> ---------------------------
>>
>> on first inspection :(
>>
>> Regards,
>>
>> Antonio
>>
>> On Tue, Dec 13, 2011 at 1:35 PM, Antonio Olivares
>> <[email protected]> =A0wrote:
>>>
>>> Hesham,
>>>
>>> scanModem reports that you have an agrsm modem supported through agrsm
>>> modem driver:
>>>
>>> Predictive =A0diagnostics for card in bus 05:00.0:
>>> =A0 =A0 =A0 =A0Modem chipset =A0detected on
>>> NAME=3D"Communication controller: Agere Systems V.92 56K WinModem "
>>> CLASS=3D0780
>>> PCIDEV=3D11c1:048c
>>> SUBSYS=3D11c1:044c
>>> IRQ=3D3
>>> HDA2=3D00:1b.0
>>> HDA2=3D01:00.1
>>> IDENT=3Dagrsm
>>>
>>> =A0For candidate modem in: =A005:00.0
>>> =A0 0780 Communication controller: Agere Systems V.92 56K WinModem
>>> =A0 =A0 =A0Primary device ID: =A011c1:048c
>>> =A0Support type needed or chipset: =A0 =A0 =A0 =A0agrsm
>>>
>>>
>>>
>>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
>>> agrserial driver pair.
>>> There are a few different chipsets which use this driver pair, but
>>> they use different code resources:
>>> Chipsets =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0KV* =A0 =A0 Pac=
kageNames (most current as of
>>> November 2009)
>>>
>>> -----------------------------------------------------------------------=
-----------------------
>>> 11c1:048c and 11c1:048f
>>> 2.6.29 =A0agrsm048pci-2.1.60_20100108_i386.deb or
>>> agrsm048pci-2.1.60_20100108.tar.gz
>>> 11c1:0620 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 2.6.31
>>> agrsm06pci-2.1.80_20100106_i386.deb or
>>> agrsm06pci-2.1.80~20100106.tar.gz !!
>>> 11c11040 (on HDA audio cards) =A0 2.6.31
>>> agrsm-11c11040_20091225_i386.deb or
>>> agrsm-11c11040-2.1.80~20091225.tar.bz2 =A0!!
>>> =A0 All available at:
>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>> Additionally there are;
>>> automation& =A0testing =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0agrsm-too=
ls_0.0.1_all.deb or
>>>
>>> agrsm-tools-0.0.1-2.noarch.rpm
>>> General background =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0agrsm_how=
to.txt
>>>
>>> -----------------------------------------------------------------------=
-------------------------
>>> * KV =3D=3D latest kernel release with a reported success
>>> !! Latest update with major credit to =A0Nikolay Zhuravlev
>>> =A0 But see conflict issue:
>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
>>> =A0 For the 11c11040 chip with kernels 2.6.31 and later a change in a
>>> modules loading settingmay be necessary.
>>> =A0 Within the file /etc/modprobe.d/alsa-base.conf =A0(or equivalent fo=
r
>>> your Distro), change the phrase:
>>> =A0 =A0 =A0options snd-hda-intel power_save=3D10
>>> =A0 to:
>>> =A0 =A0 =A0options snd-hda-intel power_save=3D0
>>> =A0 or the agrsm drivers will not function. For Ubuntu related systems
>>> this can be done with:
>>> =A0 $ sudo gedit /etc/modprobe.d/alsa-base.conf
>>>
>>> Report from =A0Bjorn Wielens:
>>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives
>>> =A0an error about the module_version symbol. Using:
>>> # modprobe --force agrmodem
>>> # modprobe --force agrserial
>>> is necessary to load the drivers, and does not appear to cause ill
>>> effects.
>>>
>>>
>>> All of the above packages are dkms competent. =A0This means that if you=
r
>>> Linux distros dkms package
>>> is previously installed, if provides for future updates matching
>>> forthcoming kernels.
>>>
>>> -------------- end Agere Systems section -------------------
>>>
>>> From
>>>
>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>>
>>> download
>>>
>>> agrsm048pci-2.1.60_20100108.tar.gz
>>> file and follow instructions provided in the readme or as provided in
>>> Modem/DOCs/Agrsm.txt.
>>>
>>> Regards,
>>>
>>>
>>> Antonio
>>>
>>> On Tue, Dec 13, 2011 at 11:47 AM, Hesham M.Hafez<[email protected]>
>>> =A0wrote:
>
> Thank you for your quick respond actually I spent 2 days to install modem
> driver and I didn't until now please I you have quick Howto to follow or =
any
> help it will be appreciated
> I'm using centos 6