Re: Clinton Bridge Newzealand Kernel 3.0.0-14-Generic
Antonio Olivares <[email protected]> Mon, 2 Jan 2012 09:32:21 -0600
| Newsgroups | gmane.linux.linmodem |
|---|---|
| Message-ID | <CAJ5UdcP4BXpX8vORENr7XpeS7qGQNrux=awnfEL1L-RDWEKL_A@mail.gmail.com> |
Clinton, These and other issues have been reported to Linuxant, which is proprietary by the way and not open source. You may try some things at your own risk: http://patchwork.ozo.com/patch/235/ so replace it with DEFINE_SPIN_LOCK() An example provided there -static spinlock_t swdevs_lock =3D SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(swdevs_lock); Try that and hopefully it works (cross your fingers), otherwise you are at the mercy of Linuxant and hopefully Jonathan has a package that you can test or you try to fix it on your own :( Regards, Antonio On Mon, Jan 2, 2012 at 4:40 AM, Clinton Bridge <[email protected]> wrote: > Hi there, > I need help to install a Conexant HSF 56k modem. > I downloaded and run ScanModem, output files are attached, following the > instructions within the ModemData file, whilst running the command > line=A0=A0 $ sudo dpkg -i hsfmodem*.deb=A0 an error occured while buildin= g > driver packages, something to with=A0 SPIN_LOCK_UNLOCKED in the > oscompat.h file, also i've attached the buildlog file. > This is the first time i've tried to install a dialup modem in ubuntu. > I was able to extract =A0 oscompat.h file from the > hsfmodem_7.80.02.06full_i386.deb=A0=A0 file, If anyone is able to help me > and i need to reinsert a corrected version, then i'll need instructions > on how to do that as i've never needed to build a deb file. > Any assistance would be great > ------ ----------- ---------- -------------- > ModemData.txt > > =A0Only plain text email is forwarded by the=A0 [email protected] Lis= t Server, > =A0as HTML can contain viruses. Use as the email Subject Line: > =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 YourName, YourCountry=A0 kernel 3.0.0-14-g= eneric > =A0With this Subject Line cogent experts will be alerted, and useful case= names left in the Archive. > =A0YourCountry will enable Country specific guidance. Linux experts in Yo= urCountry > =A0can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dial= up service. > Responses from [email protected] are sometimes blocked by an Internet= Provider mail filters. > =A0So in a day, also check the Archived responses at http://www.linmodems= .org > --------------------------=A0 System > =A0information ---------------------------- > CPU=3Di686,=A0 Ubuntu ,=A0 ALSA_version=3D1.0.24 > Linux > =A0version 3.0.0-14-generic (buildd@palmer) (gcc version 4.6.1 > (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:34:47 UTC > 2011 > =A0scanModem update of:=A0 2011_08_08 > > Distrib_ID=3DUbuntu > DistribCodeName=3Doneiric > AptRepositoryStem=3Dhttp://nz.archive.ubuntu.com/ubuntu/ > > > Presently install your Linux Distributions dkms package. It provides for = automated driver updates, > following upgrade of your kernel.=A0 For details see http://linux.dell.co= m/projects.shtml#dkms > > =A0There are no blacklisted modem drivers in /etc/modprobe*=A0 files > > =A0Potentially useful modem drivers now loaded are: > =A0=A0=A0=A0=A0=A0 snd_hda_intel > > Attached USB devices are: > =A0ID 0458:0007 KYE Systems Corp. (Mouse Systems) > =A0ID 04ca:0020 Lite-On Technology Corp. > If a cellphone is not detected, see http://ubuntuforums.org/archive/index= .php/t-878554.html > A sample report is:=A0 http://linmodems.technion.ac.il/bigarch/archive-ni= neth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to [email protected] > > Candidate PCI devices with modem chips are: > 05:04.0 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Mod= em (rev 01) > High Definition Audio cards can host modem chips. > > For candidate card in slot 05:04.0, firmware information and bootup diagn= ostics are: > =A0PCI slot=A0=A0=A0 PCI ID=A0=A0=A0 =A0=A0=A0 SubsystemID=A0=A0=A0 Name > =A0----------=A0=A0=A0 ---------=A0=A0=A0 ---------=A0=A0=A0 ------------= -- > =A005:04.0=A0=A0=A0 14f1:2f00 > =A014f1:2004=A0=A0=A0 Communication controller: Conexant Systems, Inc. HS= F 56k HSFi Modem > > =A0Modem interrupt assignment and sharing: > =A0--- Bootup diagnostics for card in PCI slot 05:04.0 ---- > [=A0=A0=A0 0.078463] pci 0000:05:04.0: [14f1:2f00] type 0 class 0x000780 > [=A0=A0=A0 0.078481] pci 0000:05:04.0: reg 10: [mem 0xfc510000-0xfc51ffff= ] > [=A0=A0=A0 0.078491] pci 0000:05:04.0: reg 14: [io=A0 0x1000-0x1007] > [=A0=A0=A0 0.078545] pci 0000:05:04.0: PME# supported from D3hot D3cold > [=A0=A0=A0 0.078550] pci 0000:05:04.0: PME# disabled > > =A0The PCI slot 05:04.0 of the modem card may be disabled early in > =A0a bootup process,=A0 but then enabled later. If modem drivers load > =A0but the=A0 modem is not responsive, read DOCs/Bootup.txt about possibl= e fixes. > =A0Send dmesg.txt along with ModemData.txt to [email protected] > =A0if help is > =A0needed. > > > =3D=3D=3D Finished firmware and bootup diagnostics, next deducing cogent = software. =3D=3D=3D > > Predictive=A0 diagnostics for card in bus 05:04.0: > =A0=A0=A0 Modem chipset=A0 detected on > NAME=3D"Communication controller: Conexant Systems, Inc. HSF 56k HSFi Mod= em " > CLASS=3D0780 > PCIDEV=3D14f1:2f00 > SUBSYS=3D14f1:2004 > IRQ=3D11 > IDENT=3Dhsfmodem > Driver=3Dhsfmodem-drivers > > =A0For candidate modem in:=A0 05:04.0 > =A0=A0 0780 Communication controller: Conexant Systems, Inc. HSF 56k HSFi= Modem > =A0=A0=A0=A0=A0 Primary device ID:=A0 14f1:2f00 > =A0Support type needed or chipset:=A0=A0=A0 hsfmodem > > > > For > =A0owners of a Dell PCs with Conexant HSF modems, a driver source package > with full speed enabled is available, but requires driver compiling. > Read DOCs/Conexant.txt > > > Modem support packages from Linuxant include resources for compiling > =A0drivers. > If an installer package matching your kernel_version=A0 is not provided, > just install a generic code package. > > =A0From=A0 http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.= php > =A0download hsfmodem-7.80.02.05full_k3.0.0_14_generic_ubuntu_i386.deb.zip > =A0Under Linux unpack with: > =A0$ unzip hsfmodem*.zip > =A0Then install with: > =A0$ sudo dpkg -i hsfmodem*.deb > =A0Subsequently, the modem should be found with > =A0$ sudo wvdialconf /etc/wvdial.conf > =A0Edit in your personal information with: > =A0$ sudo gedit /etc/wvdial.conf > =A0and try dialing out with: > =A0$ sudo wvdial. > =A0See DOCs/Testing.txt=A0 for details. > > =A0The directions following below need only be pursued, if the above proc= edures are not adequate. > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to fin= d the > hsfmodem package matching your > =A0System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the Fi= leName, > your KernelVersion:=A0=A0=A0 3.0.0_14_generic > They can be found through http://www.linuxant.com/drivers/hsf/full/downlo= ads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder i= s OK) > and unzipped with: > =A0=A0=A0 unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm per= mission: > =A0 sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > =A0 rpm -i hsf*.rpm > =A0Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > =A0Completed candidate modem analyses. > > =A0The base of the UDEV > =A0device file system is: /dev/.udev > > =A0Versions adequately match for the compiler installed: 4.6.1 > =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 and the compiler used in kernel asse= mbly: 4.6.1 > > =A0linux-headers-3.0.0-14-generic resources needed for compiling are not = manifestly ready! > > =A0If compiling is necessary packages must be installed, providing: > =A0=A0=A0 =A0linux-headers-3.0.0-14-generic > > > If a driver compilation fails, with message including some lack of some F= ileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. Th= e minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $=A0 apt-get update > $=A0 apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related > =A0distributions, run the following command to display the needed package= list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > =A0=A0=A0 -rwsr-xr-x 1 root dip 273272 2011-02-04 21:43 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > =A0=A0=A0 http://linmodems.technion.ac.il/linmodems/archive-sixth/msg0263= 7.html > > To enable dialout without Root permission do: > =A0=A0=A0 $ su - root=A0 (not for Ubuntu) > =A0=A0=A0=A0=A0=A0=A0 sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > =A0=A0=A0 sudo chmod a+x /usr/sbin/pppd > > Checking settings of:=A0=A0=A0 /etc/ppp/options > asyncmap > =A00 > noauth > crtscts > lock > hide-password > modem > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > =A0=A0 Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from http://linmodems.technion.ac.il/packa= ges/=A0 get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be changed = to match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > =A0Don't worry about the following, it is for experts should trouble shoo= ting be necessary. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D > > =A0Checking for modem support lines: > =A0-------------------------------------- > =A0=A0=A0=A0 /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > =A0=A0=A0=A0 Within /etc/udev/ files: > > =A0=A0=A0=A0 Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=3D-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=3D-2 > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order t= o blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > =A0=A0=A0=A0 Within any ancient /etc/devfs files: > > =A0=A0=A0=A0 Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > dmesg.txt > > =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 CPU0 > =A0 0:=A0=A0=A0=A0=A0=A0=A0=A0 44 > =A0IO-APIC-edge=A0=A0=A0=A0=A0 timer > =A0 1:=A0=A0=A0=A0=A0=A0=A0=A0=A0 2=A0=A0 IO-APIC-edge=A0=A0=A0=A0=A0 i80= 42 > =A0 3:=A0=A0=A0=A0=A0=A0=A0=A0=A0 3=A0=A0 IO-APIC-edge > =A0 4:=A0=A0=A0=A0=A0=A0=A0=A0=A0 3=A0=A0 IO-APIC-edge > =A0 6:=A0=A0=A0=A0=A0=A0=A0=A0=A0 3=A0=A0 IO-APIC-edge=A0=A0=A0=A0=A0 flo= ppy > =A0 7:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 IO-APIC-edge=A0=A0=A0=A0=A0 par= port0 > =A0 8:=A0=A0=A0=A0=A0=A0=A0=A0=A0 1=A0=A0 IO-APIC-edge=A0=A0=A0=A0=A0 rtc= 0 > =A0 9:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 IO-APIC-fasteoi > =A0acpi > =A012:=A0=A0=A0=A0=A0=A0=A0=A0=A0 4=A0=A0 IO-APIC-edge=A0=A0=A0=A0=A0 i80= 42 > =A014:=A0=A0=A0=A0=A0=A0 8938=A0=A0 IO-APIC-edge=A0=A0=A0=A0=A0 ata_piix > =A015:=A0=A0=A0=A0=A0=A0=A0 834=A0=A0 IO-APIC-edge=A0=A0=A0=A0=A0 ata_pii= x > =A016:=A0=A0=A0=A0=A0=A0 2209=A0=A0 IO-APIC-fasteoi=A0=A0 uhci_hcd:usb2, = i915 > =A017:=A0=A0=A0=A0=A0=A0=A0=A0 54=A0=A0 IO-APIC-fasteoi=A0=A0 Intel ICH5 > =A018:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 IO-APIC-fasteoi=A0=A0 ata_piix,= uhci_hcd:usb4 > =A019:=A0=A0=A0=A0=A0=A0 7588=A0=A0 IO-APIC-fasteoi=A0=A0 uhci_hcd:usb3 > =A020:=A0=A0=A0=A0=A0=A0=A0 202=A0=A0 IO-APIC-fasteoi > =A0eth0 > =A023:=A0=A0=A0=A0=A0=A0=A0=A0=A0 3=A0=A0 IO-APIC-fasteoi=A0=A0 ehci_hcd:= usb1 > NMI:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 Non-maskable interrupts > LOC:=A0=A0=A0=A0=A0 43714=A0=A0 Local timer interrupts > SPU:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 Spurious interrupts > PMI:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 Performance monitoring interrupts > IWI:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 IRQ work interrupts > RES:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 Rescheduling interrupts > CAL:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 Function call interrupts > TLB:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 TLB shootdowns > TRM: > =A00=A0=A0 Thermal event interrupts > THR:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 Threshold APIC interrupts > MCE:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0=A0=A0 Machine check exceptions > MCP:=A0=A0=A0=A0=A0=A0=A0=A0=A0 2=A0=A0 Machine check polls > ERR:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0 > MIS:=A0=A0=A0=A0=A0=A0=A0=A0=A0 0 > > [=A0=A0=A0 0.000000] Initializing cgroup subsys cpuset > [=A0=A0=A0 0.000000] Initializing cgroup subsys cpu > [ > =A00.000000] Linux version 3.0.0-14-generic (buildd@palmer) (gcc version > 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 > 20:34:47 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9) > [=A0=A0=A0 0.000000] KERNEL supported cpus: > [=A0=A0=A0 0.000000]=A0=A0 Intel GenuineIntel > [ > =A00.000000]=A0=A0 AMD AuthenticAMD > [=A0=A0=A0 0.000000]=A0=A0 NSC Geode by NSC > [=A0=A0=A0 0.000000]=A0=A0 Cyrix CyrixInstead > [=A0=A0=A0 0.000000]=A0=A0 Centaur CentaurHauls > [=A0=A0=A0 0.000000]=A0=A0 Transmeta GenuineTMx86 > [=A0=A0=A0 0.000000]=A0=A0 Transmeta TransmetaCPU > [=A0=A0=A0 0.000000]=A0=A0 UMC UMC UMC UMC > [=A0=A0=A0 0.000000] BIOS-provided physical RAM map: > [=A0=A0=A0 0.000000]=A0 BIOS-e820: 0000000000000000 - 000000000009fc00 (u= sable) > [=A0=A0=A0 0.000000]=A0 BIOS-e820: 000000000009fc00 - 00000000000a0000 (r= eserved) > [=A0=A0=A0 0.000000]=A0 BIOS-e820: 00000000000e0000 - 0000000000100000 (r= eserved) > [=A0=A0=A0 0.000000]=A0 BIOS-e820: 0000000000100000 - 000000007f7f0000 (u= sable) > [=A0=A0=A0 0.000000]=A0 BIOS-e820: 000000007f7f0000 - 0000000080000000 > =A0(reserved) > [=A0=A0=A0 0.000000]=A0 BIOS-e820: 00000000fec00000 - 0000000100000000 (r= eserved) > [=A0=A0=A0 0.000000] Notice: NX (Execute Disable) protection missing in C= PU! > [=A0=A0=A0 0.000000] NX (Execute Disable) protection: approximated by x86= segment limits > [=A0=A0=A0 0.000000] DMI 2.3 present. > [=A0=A0=A0 0.000000] DMI: Hewlett-Packard HP d530 SFF(DC578AV)/085Ch, BIO= S 786B2 v1.11 07/10/2003 > [=A0=A0=A0 0.000000] e820 update range: 0000000000000000 - 00000000000100= 00 (usable) =3D=3D> (reserved) > [=A0=A0=A0 0.000000] e820 remove range: 00000000000a0000 - 00000000001000= 00 (usable) > [=A0=A0=A0 0.000000] last_pfn =3D 0x7f7f0 max_arch_pfn =3D 0x100000 > [=A0=A0=A0 0.000000] MTRR default type: uncachable > [=A0=A0=A0 0.000000] MTRR fixed ranges enabled: > [=A0=A0=A0 0.000000]=A0=A0 00000-9FFFF write-back > [ > =A00.000000]=A0=A0 A0000-BFFFF uncachable > [=A0=A0=A0 0.000000]=A0=A0 C0000-DFFFF write-protect > [=A0=A0=A0 0.000000]=A0=A0 E0000-EFFFF write-back > [=A0=A0=A0 0.000000]=A0=A0 F0000-FFFFF write-protect > [=A0=A0=A0 0.000000] MTRR variable ranges enabled: > [=A0=A0=A0 0.000000]=A0=A0 0 base 000000000 mask F80000000 write-back > [=A0=A0=A0 0.000000]=A0=A0 1 base 07F800000 mask FFF800000 uncachable > [=A0=A0=A0 0.000000]=A0=A0 2 base 0FEDA0000 mask FFFFE0000 write-back > [=A0=A0=A0 0.000000]=A0=A0 3 disabled > [=A0=A0=A0 0.000000]=A0=A0 4 disabled > [=A0=A0=A0 0.000000]=A0=A0 5 disabled > [=A0=A0=A0 0.000000]=A0=A0 6 disabled > [=A0=A0=A0 0.000000]=A0=A0 7 disabled > [=A0=A0=A0 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > =A00x7010600070106 > [=A0=A0=A0 0.000000] original variable MTRRs > [=A0=A0=A0 0.000000] reg 0, base: 0GB, range: 2GB, type WB > [=A0=A0=A0 0.000000] reg 1, base: 2040MB, range: 8MB, type UC > [=A0=A0=A0 0.000000] reg 2, base: 4175488KB, range: 128KB, type WB > [=A0=A0=A0 0.000000] total RAM covered: 2040M > [=A0=A0=A0 0.000000] Found optimal setting for mtrr clean up > [=A0=A0=A0 0.000000]=A0 gran_size: 64K =A0=A0=A0 chunk_size: 16M =A0=A0= =A0 num_reg: 3=A0 =A0=A0=A0 lose cover RAM: 0G > [=A0=A0=A0 0.000000] New variable MTRRs > [=A0=A0=A0 0.000000] reg 0, base: 0GB, range: 2GB, type WB > [=A0=A0=A0 0.000000] reg 1, base: 2040MB, range: 8MB, type UC > [=A0=A0=A0 0.000000] reg 2, base: 4175488KB, range: 128KB, type WB > [=A0=A0=A0 0.000000] e820 update range: 000000007f800000 - 00000000feda00= 00 (usable) > =A0=3D=3D> (reserved) > [=A0=A0=A0 0.000000] found SMP MP-table at [c00faa60] faa60 > [=A0=A0=A0 0.000000] initial memory mapped : 0 - 01c00000 > [=A0=A0=A0 0.000000] Base memory trampoline at [c009b000] 9b000 size 1638= 4 > [=A0=A0=A0 0.000000] init_memory_mapping: 0000000000000000-00000000377fe0= 00 > [=A0=A0=A0 0.000000]=A0 0000000000 - 0000400000 page 4k > [=A0=A0=A0 0.000000]=A0 0000400000 - 0037400000 page 2M > [=A0=A0=A0 0.000000]=A0 0037400000 - 00377fe000 page 4k > [=A0=A0=A0 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb00= 0-1c00000 > [=A0=A0=A0 0.000000] RAMDISK: 365ea000 - 372ed000 > [=A0=A0=A0 0.000000] ACPI: RSDP 000ea410 00014 (v00 COMPAQ) > [=A0=A0=A0 0.000000] ACPI: RSDT 000e5e40 0007C (v01 COMPAQ CPQ0064=A0 200= 30710=A0=A0=A0=A0=A0 00000000) > [=A0=A0=A0 0.000000] ACPI: FACP 000e5ef8 > =A000074 (v01 COMPAQ SPRINGD=A0 00000001=A0=A0=A0=A0=A0 00000000) > [=A0=A0=A0 0.000000] ACPI: DSDT 000e6008 00D7D (v01 COMPAQ=A0=A0=A0=A0 DS= DT 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: FACS 000e5e00 00040 > [=A0=A0=A0 0.000000] ACPI: SSDT 000e6d85 005FE (v01 COMPAQ=A0 PROJECT 000= 00001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e7383 0053A (v01 COMPAQ CORE_PNP 00000= 001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e78bd 001F2 (v01 COMPAQ CORE_UTL 00000= 001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e7aaf 0032E (v01 COMPAQ VILLTBL1 00000= 001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e7ddd 0053F (v01 COMPAQ LGCYLITE 00000= 001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e831c 00167 (v01 COMPAQ=A0=A0=A0 UART2= 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e8483 0014E > =A0(v01 COMPAQ=A0=A0 FLOPPY 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: APIC 000e5f6c 00068 (v01 COMPAQ SPRINGD=A0 000= 00001=A0=A0=A0=A0=A0 00000000) > [=A0=A0=A0 0.000000] ACPI: SSDT 000ea16d 000B2 (v01 COMPAQ=A0=A0=A0=A0 AP= IC 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: ASF! 000e5fd4 00034 (v16 COMPAQ SPRINGD=A0 000= 00001=A0=A0=A0=A0=A0 00000000) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e8a3f 0040F (v01 COMPAQ PNP_PRSS 00000= 001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e8e4e 0016D (v01 COMPAQ UR2_PRSS 00000= 001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e8fbb 00119 (v01 COMPAQ FPY_PRSS 00000= 001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e9189 00167 (v01 COMPAQ=A0=A0=A0=A0=A0= =A0 S3 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e92f0 000E3 (v01 > =A0COMPAQ=A0 CORE_S3 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e93d3 0013E (v01 COMPAQ=A0=A0 PIDETM 0= 0000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e9955 0016B (v01 COMPAQ=A0=A0=A0=A0 GT= F0 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e9511 00143 (v01 COMPAQ=A0=A0 SIDETM 0= 0000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e9c30 00170 (v01 COMPAQ=A0=A0=A0=A0 GT= F2 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000e9f10 000F0 (v01 COMPAQ=A0=A0=A0=A0=A0= L08 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: SSDT 000ea371 00054 (v01 COMPAQ=A0=A0=A0 FINIS= 00000001 MSFT 0100000E) > [=A0=A0=A0 0.000000] ACPI: Local APIC address 0xfee00000 > [=A0=A0=A0 0.000000] 1151MB HIGHMEM available. > [=A0=A0=A0 0.000000] 887MB LOWMEM > =A0available. > [=A0=A0=A0 0.000000]=A0=A0 mapped low ram: 0 - 377fe000 > [=A0=A0=A0 0.000000]=A0=A0 low ram: 0 - 377fe000 > [=A0=A0=A0 0.000000] Zone PFN ranges: > [=A0=A0=A0 0.000000]=A0=A0 DMA=A0=A0=A0=A0=A0 0x00000010 -> 0x00001000 > [=A0=A0=A0 0.000000]=A0=A0 Normal=A0=A0 0x00001000 -> 0x000377fe > [=A0=A0=A0 0.000000]=A0=A0 HighMem=A0 0x000377fe -> 0x0007f7f0 > [=A0=A0=A0 0.000000] Movable zone start PFN for each node > [=A0=A0=A0 0.000000] early_node_map[2] active PFN ranges > [=A0=A0=A0 0.000000]=A0=A0=A0=A0 0: 0x00000010 -> 0x0000009f > [=A0=A0=A0 0.000000]=A0=A0=A0=A0 0: 0x00000100 -> 0x0007f7f0 > [=A0=A0=A0 0.000000] On node 0 totalpages: 522111 > [=A0=A0=A0 0.000000] free_area_init_node: node 0, pgdat c17b3400, node_me= m_map > =A0f55fa200 > [=A0=A0=A0 0.000000]=A0=A0 DMA zone: 32 pages used for memmap > [=A0=A0=A0 0.000000]=A0=A0 DMA zone: 0 pages reserved > [=A0=A0=A0 0.000000]=A0=A0 DMA zone: 3951 pages, LIFO batch:0 > [=A0=A0=A0 0.000000]=A0=A0 Normal zone: 1744 pages used for memmap > [=A0=A0=A0 0.000000]=A0=A0 Normal zone: 221486 pages, LIFO batch:31 > [=A0=A0=A0 0.000000]=A0=A0 HighMem zone: 2304 pages used for memmap > [=A0=A0=A0 0.000000]=A0=A0 HighMem zone: 292594 pages, LIFO batch:31 > [=A0=A0=A0 0.000000] Using APIC driver default > [=A0=A0=A0 0.000000] ACPI: PM-Timer IO Port: 0xf808 > [=A0=A0=A0 0.000000] ACPI: Local APIC address 0xfee00000 > [=A0=A0=A0 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [=A0=A0=A0 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] > =A0disabled) > [=A0=A0=A0 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [=A0=A0=A0 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > [=A0=A0=A0 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[= 0]) > [=A0=A0=A0 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000= , GSI 0-23 > [=A0=A0=A0 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl = dfl) > [=A0=A0=A0 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high= level) > [=A0=A0=A0 0.000000] ACPI: IRQ0 used by override. > [=A0=A0=A0 0.000000] ACPI: IRQ2 used by override. > [=A0=A0=A0 0.000000] ACPI: IRQ9 used by override. > [=A0=A0=A0 0.000000] Using ACPI (MADT) for SMP configuration information > [=A0=A0=A0 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs > [=A0=A0=A0 0.000000] nr_irqs_gsi: 40 > [ > =A00.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000= a0000 > [=A0=A0=A0 0.000000] PM: Registered nosave memory: 00000000000a0000 - 000= 00000000e0000 > [=A0=A0=A0 0.000000] PM: Registered nosave memory: 00000000000e0000 - 000= 0000000100000 > [=A0=A0=A0 0.000000] Allocating PCI resources starting at 80000000 (gap: = 80000000:7ec00000) > [=A0=A0=A0 0.000000] Booting paravirtualized kernel on bare hardware > [=A0=A0=A0 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids= :2 nr_node_ids:1 > [=A0=A0=A0 0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s26240 r0 d2= 2912 u2097152 > [=A0=A0=A0 0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=3D1*4194= 304 > [=A0=A0=A0 0.000000] pcpu-alloc: [0] 0 1 > [=A0=A0=A0 0.000000] Built 1 zonelists in Zone order, mobility grouping o= n.=A0 Total pages: 518031 > [=A0=A0=A0 0.000000] Kernel command > =A0line: BOOT_IMAGE=3D/boot/vmlinuz-3.0.0-14-generic root=3DUUID=3D759189= 5d-3ef0-4335-9f9d-9fa698505e62 ro quiet splash vt.handoff=3D7 > [=A0=A0=A0 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [=A0=A0=A0 0.000000] Dentry cache hash table entries: 131072 (order: 7, 5= 24288 bytes) > [=A0=A0=A0 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262= 144 bytes) > [=A0=A0=A0 0.000000] Initializing CPU#0 > [=A0=A0=A0 0.000000] allocated 8355328 bytes of page_cgroup > [=A0=A0=A0 0.000000] please try 'cgroup_disable=3Dmemory' option if you d= on't want memory cgroups > [=A0=A0=A0 0.000000] Initializing HighMem for node 0 (000377fe:0007f7f0) > [=A0=A0=A0 0.000000] Memory: 2040148k/2088896k available (5335k kernel co= de, 48296k reserved, 2592k data, 696k init, 1179592k highmem) > [=A0=A0=A0 0.000000] virtual kernel memory layout: > [ > =A00.000000]=A0=A0=A0=A0 fixmap=A0 : 0xfff16000 - 0xfffff000=A0=A0 ( 932 = kB) > [=A0=A0=A0 0.000000]=A0=A0=A0=A0 pkmap=A0=A0 : 0xff800000 - 0xffc00000=A0= =A0 (4096 kB) > [=A0=A0=A0 0.000000]=A0=A0=A0=A0 vmalloc : 0xf7ffe000 - 0xff7fe000=A0=A0 = ( 120 MB) > [=A0=A0=A0 0.000000]=A0=A0=A0=A0 lowmem=A0 : 0xc0000000 - 0xf77fe000=A0= =A0 ( 887 MB) > [=A0=A0=A0 0.000000]=A0=A0=A0=A0=A0=A0 .init : 0xc17bf000 - 0xc186d000=A0= =A0 ( 696 kB) > [=A0=A0=A0 0.000000]=A0=A0=A0=A0=A0=A0 .data : 0xc1535d84 - 0xc17be080=A0= =A0 (2592 kB) > [=A0=A0=A0 0.000000]=A0=A0=A0=A0=A0=A0 .text : 0xc1000000 - 0xc1535d84=A0= =A0 (5335 kB) > [=A0=A0=A0 0.000000] Checking if this processor honours the WP bit even i= n supervisor mode...Ok. > [=A0=A0=A0 0.000000] SLUB: > =A0Genslabs=3D15, HWalign=3D128, Order=3D0-3, MinObjects=3D0, CPUs=3D2, N= odes=3D1 > [=A0=A0=A0 0.000000] Hierarchical RCU implementation. > [=A0=A0=A0 0.000000] =A0=A0=A0 RCU dyntick-idle grace-period acceleration= is enabled. > [=A0=A0=A0 0.000000] NR_IRQS:2304 nr_irqs:512 16 > [=A0=A0=A0 0.000000] CPU 0 irqstacks, hard=3Df4408000 soft=3Df440a000 > [=A0=A0=A0 0.000000] vt handoff: transparent VT on vt#7 > [=A0=A0=A0 0.000000] Console: colour dummy device 80x25 > [=A0=A0=A0 0.000000] console [tty0] enabled > [=A0=A0=A0 0.000000] Fast TSC calibration using PIT > [=A0=A0=A0 0.000000] Detected 2792.716 MHz processor. > [=A0=A0=A0 0.004005] Calibrating delay loop (skipped), value calculated u= sing timer frequency.. 5585.43 BogoMIPS (lpj=3D11170864) > [=A0=A0=A0 0.004013] pid_max: default: 32768 minimum: 301 > [=A0=A0=A0 0.004049] Security Framework > =A0initialized > [=A0=A0=A0 0.004087] AppArmor: AppArmor initialized > [=A0=A0=A0 0.004091] Yama: becoming mindful. > [=A0=A0=A0 0.004176] Mount-cache hash table entries: 512 > [=A0=A0=A0 0.004433] Initializing cgroup subsys cpuacct > [=A0=A0=A0 0.004442] Initializing cgroup subsys memory > [=A0=A0=A0 0.004455] Initializing cgroup subsys devices > [=A0=A0=A0 0.004459] Initializing cgroup subsys freezer > [=A0=A0=A0 0.004463] Initializing cgroup subsys net_cls > [=A0=A0=A0 0.004467] Initializing cgroup subsys blkio > [=A0=A0=A0 0.004480] Initializing cgroup subsys perf_event > [=A0=A0=A0 0.004529] CPU0: Hyper-Threading is disabled > [=A0=A0=A0 0.004535] mce: CPU supports 4 MCE banks > [=A0=A0=A0 0.004550] CPU0: Thermal monitoring enabled (TM1) > [=A0=A0=A0 0.004839] SMP alternatives: switching to UP > =A0code > [=A0=A0=A0 0.017184] ACPI: Core revision 20110413 > [=A0=A0=A0 0.022223] ftrace: allocating 24878 entries in 49 pages > [=A0=A0=A0 0.024151] Enabling APIC mode:=A0 Flat.=A0 Using 1 I/O APICs > [=A0=A0=A0 0.024451] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1= pin2=3D-1 > [=A0=A0=A0 0.067662] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 > [=A0=A0=A0 0.068003] Performance Events: Netburst events, Netburst P4/Xeo= n PMU driver. > [=A0=A0=A0 0.068003] ... version:=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0 0 > [=A0=A0=A0 0.068003] ... bit width:=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 40 > [=A0=A0=A0 0.068003] ... generic registers:=A0=A0=A0=A0=A0 18 > [=A0=A0=A0 0.068003] ... value > =A0mask:=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 000000ffffffffff > [=A0=A0=A0 0.068003] ... max period:=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = 0000007fffffffff > [=A0=A0=A0 0.068003] ... fixed-purpose events:=A0=A0 0 > [=A0=A0=A0 0.068003] ... event mask:=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = 000000000003ffff > [=A0=A0=A0 0.068003] Brought up 1 CPUs > [=A0=A0=A0 0.068003] Total of 1 processors activated (5585.43 BogoMIPS). > [=A0=A0=A0 0.068003] devtmpfs: initialized > [=A0=A0=A0 0.068501] print_constraints: dummy: > [=A0=A0=A0 0.068529] Time:=A0 0:32:57=A0 Date: 01/02/12 > [=A0=A0=A0 0.068591] NET: Registered protocol family 16 > [=A0=A0=A0 0.068752] EISA bus registered > [=A0=A0=A0 0.068765] ACPI: bus type pci > =A0registered > [=A0=A0=A0 0.069069] PCI: PCI BIOS revision 2.20 entry at 0xec5a9, last b= us=3D5 > [=A0=A0=A0 0.069073] PCI: Using configuration type 1 for base access > [=A0=A0=A0 0.070484] bio: create slab <bio-0> at 0 > [=A0=A0=A0 0.071296] ACPI: EC: Look up EC in DSDT > [=A0=A0=A0 0.072911] ACPI: Interpreter enabled > [=A0=A0=A0 0.072920] ACPI: (supports S0 S1 S3 S4 S5) > [=A0=A0=A0 0.072947] ACPI: Using IOAPIC for interrupt routing > [=A0=A0=A0 0.076665] ACPI: No dock devices found. > [=A0=A0=A0 0.076669] HEST: Table not found. > [=A0=A0=A0 0.076676] PCI: Ignoring host bridge windows from ACPI; if nece= ssary, use "pci=3Duse_crs" and report a bug > [=A0=A0=A0 0.076818] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff= ]) > [=A0=A0=A0 0.077069] pci_root PNP0A03:00: host bridge window [mem 0x80100= 000-0xfebfffff] > =A0(ignored) > [=A0=A0=A0 0.077074] pci_root PNP0A03:00: host bridge window [io=A0 0x000= 0-0x0cf7] (ignored) > [=A0=A0=A0 0.077077] pci_root PNP0A03:00: host bridge window [io=A0 0x0d0= 0-0xffff] (ignored) > [=A0=A0=A0 0.077080] pci_root PNP0A03:00: host bridge window [mem 0x000a0= 000-0x000bffff] (ignored) > [=A0=A0=A0 0.077099] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600 > [=A0=A0=A0 0.077105] pci 0000:00:00.0: Enabling MCH 'Overflow' Device > [=A0=A0=A0 0.077117] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff= pref] > [=A0=A0=A0 0.077182] pci 0000:00:02.0: [8086:2572] type 0 class 0x000300 > [=A0=A0=A0 0.077198] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff= pref] > [=A0=A0=A0 0.077208] pci 0000:00:02.0: reg 14: [mem 0xfc400000-0xfc47ffff= ] > [=A0=A0=A0 0.077217] pci 0000:00:02.0: reg 18: [io=A0 0x24e0-0x24e7] > [ > =A00.077277] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880 > [=A0=A0=A0 0.077289] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff= ] > [=A0=A0=A0 0.077375] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03 > [=A0=A0=A0 0.077422] pci 0000:00:1d.0: reg 20: [io=A0 0x2440-0x245f] > [=A0=A0=A0 0.077459] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03 > [=A0=A0=A0 0.077506] pci 0000:00:1d.1: reg 20: [io=A0 0x2460-0x247f] > [=A0=A0=A0 0.077543] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03 > [=A0=A0=A0 0.077589] pci 0000:00:1d.2: reg 20: [io=A0 0x2480-0x249f] > [=A0=A0=A0 0.077638] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03 > [=A0=A0=A0 0.077661] pci 0000:00:1d.7: reg 10: [mem 0xfc480000-0xfc4803ff= ] > [=A0=A0=A0 0.077745] pci 0000:00:1d.7: PME# supported from D0 D3hot D3col= d > [=A0=A0=A0 0.077751] pci 0000:00:1d.7: > =A0PME# disabled > [=A0=A0=A0 0.077770] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 > [=A0=A0=A0 0.077815] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601 > [=A0=A0=A0 0.077883] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 > [=A0=A0=A0 0.077890] pci 0000:00:1f.0: Enabled i801 SMBus device > [=A0=A0=A0 0.077900] pci 0000:00:1f.0: quirk: [io=A0 0xf800-0xf87f] claim= ed by ICH4 ACPI/GPIO/TCO > [=A0=A0=A0 0.077905] pci 0000:00:1f.0: quirk: [io=A0 0xfa00-0xfa3f] claim= ed by ICH4 GPIO > [=A0=A0=A0 0.077923] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101 > [=A0=A0=A0 0.077939] pci 0000:00:1f.1: reg 10: [io=A0 0x24e8-0x24ef] > [=A0=A0=A0 0.077950] pci 0000:00:1f.1: reg 14: [io=A0 0x2808-0x280b] > [=A0=A0=A0 0.077961] pci 0000:00:1f.1: reg 18: [io=A0 0x24f0-0x24f7] > [=A0=A0=A0 0.077971] pci 0000:00:1f.1: reg 1c: [io > =A00x280c-0x280f] > [=A0=A0=A0 0.077982] pci 0000:00:1f.1: reg 20: [io=A0 0x24c0-0x24cf] > [=A0=A0=A0 0.077993] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff= ] > [=A0=A0=A0 0.078022] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101 > [=A0=A0=A0 0.078035] pci 0000:00:1f.2: reg 10: [io=A0 0x24f8-0x24ff] > [=A0=A0=A0 0.078045] pci 0000:00:1f.2: reg 14: [io=A0 0x2810-0x2813] > [=A0=A0=A0 0.078055] pci 0000:00:1f.2: reg 18: [io=A0 0x2800-0x2807] > [=A0=A0=A0 0.078064] pci 0000:00:1f.2: reg 1c: [io=A0 0x2814-0x2817] > [=A0=A0=A0 0.078074] pci 0000:00:1f.2: reg 20: [io=A0 0x24d0-0x24df] > [=A0=A0=A0 0.078108] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05 > [=A0=A0=A0 0.078155] pci 0000:00:1f.3: reg 20: [io=A0 0xfc00-0xfc1f] > [=A0=A0=A0 0.078200] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401 > [ > =A00.078217] pci 0000:00:1f.5: reg 10: [io=A0 0x2000-0x20ff] > [=A0=A0=A0 0.078227] pci 0000:00:1f.5: reg 14: [io=A0 0x2400-0x243f] > [=A0=A0=A0 0.078237] pci 0000:00:1f.5: reg 18: [mem 0xfc480400-0xfc4805ff= ] > [=A0=A0=A0 0.078248] pci 0000:00:1f.5: reg 1c: [mem 0xfc480600-0xfc4806ff= ] > [=A0=A0=A0 0.078288] pci 0000:00:1f.5: PME# supported from D0 D3hot D3col= d > [=A0=A0=A0 0.078293] pci 0000:00:1f.5: PME# disabled > [=A0=A0=A0 0.078335] pci 0000:05:02.0: [14e4:1696] type 0 class 0x000200 > [=A0=A0=A0 0.078364] pci 0000:05:02.0: reg 10: [mem 0x00000000-0x0000ffff= 64bit] > [=A0=A0=A0 0.078436] pci 0000:05:02.0: PME# supported from D3hot D3cold > [=A0=A0=A0 0.078441] pci 0000:05:02.0: PME# disabled > [=A0=A0=A0 0.078463] pci 0000:05:04.0: [14f1:2f00] type 0 class 0x000780 > [=A0=A0=A0 0.078481] pci 0000:05:04.0: reg 10: [mem > =A00xfc510000-0xfc51ffff] > [=A0=A0=A0 0.078491] pci 0000:05:04.0: reg 14: [io=A0 0x1000-0x1007] > [=A0=A0=A0 0.078545] pci 0000:05:04.0: PME# supported from D3hot D3cold > [=A0=A0=A0 0.078550] pci 0000:05:04.0: PME# disabled > [=A0=A0=A0 0.078589] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtrac= tive decode) > [=A0=A0=A0 0.078594] pci 0000:00:1e.0:=A0=A0 bridge window [io=A0 0x1000-= 0x1fff] > [=A0=A0=A0 0.078600] pci 0000:00:1e.0:=A0=A0 bridge window [mem 0xfc50000= 0-0xfc7fffff] > [=A0=A0=A0 0.078605] pci 0000:00:1e.0:=A0=A0 bridge window [mem 0xfff0000= 0-0x000fffff pref] (disabled) > [=A0=A0=A0 0.078609] pci 0000:00:1e.0:=A0=A0 bridge window [io=A0 0x0000-= 0xffff] (subtractive decode) > [=A0=A0=A0 0.078612] pci 0000:00:1e.0:=A0=A0 bridge window [mem 0x0000000= 0-0xffffffff] (subtractive decode) > [=A0=A0=A0 0.078622] > =A0pci_bus 0000:00: on NUMA node 0 > [=A0=A0=A0 0.078627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [=A0=A0=A0 0.078772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._= PRT] > [=A0=A0=A0 0.079048]=A0 pci0000:00: Unable to request _OSC control (_OSC = support mask: 0x1e) > [=A0=A0=A0 0.083208] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *= 11 14 15) > [=A0=A0=A0 0.083282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 = 11 14 15) > [=A0=A0=A0 0.083354] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 = 11 14 15) > [=A0=A0=A0 0.083425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 = 11 14 15) > [=A0=A0=A0 0.083496] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 = 11 14 15) > [=A0=A0=A0 0.083567] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 1= 1 14 15) *0, disabled. > [=A0=A0=A0 0.083640] ACPI: PCI Interrupt Link [LNKG] > =A0(IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. > [=A0=A0=A0 0.083713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 = 11 14 15) > [=A0=A0=A0 0.083866] vgaarb: device added: PCI:0000:00:02.0,decodes=3Dio+= mem,owns=3Dio+mem,locks=3Dnone > [=A0=A0=A0 0.083875] vgaarb: loaded > [=A0=A0=A0 0.083877] vgaarb: bridge control possible 0000:00:02.0 > [=A0=A0=A0 0.084235] SCSI subsystem initialized > [=A0=A0=A0 0.084344] libata version 3.00 loaded. > [=A0=A0=A0 0.084423] usbcore: registered new interface driver usbfs > [=A0=A0=A0 0.084438] usbcore: registered new interface driver hub > [=A0=A0=A0 0.084478] usbcore: registered new device driver usb > [=A0=A0=A0 0.084609] PCI: Using ACPI for IRQ routing > [=A0=A0=A0 0.084747] PCI: pci_cache_line_size set to 64 bytes > [=A0=A0=A0 0.084816] reserve RAM buffer: 000000000009fc00 - 000000000009f= fff > [=A0=A0=A0 0.084819] reserve RAM buffer: 000000007f7f0000 - 000000007ffff= fff > [=A0=A0=A0 0.084977] NetLabel: Initializing > [=A0=A0=A0 0.084980] NetLabel:=A0 domain hash size =3D 128 > [=A0=A0=A0 0.084982] NetLabel:=A0 protocols =3D UNLABELED CIPSOv4 > [=A0=A0=A0 0.084998] NetLabel:=A0 unlabeled traffic allowed by default > [=A0=A0=A0 0.085172] hpet clockevent registered > [=A0=A0=A0 0.085178] HPET: 3 timers in total, 0 timers will be used for p= er-cpu timer > [=A0=A0=A0 0.085184] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [=A0=A0=A0 0.085191] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [=A0=A0=A0 0.088083] Switching to clocksource hpet > [=A0=A0=A0 0.091955] Switched to NOHz mode on CPU #0 > [=A0=A0=A0 0.098388] AppArmor: AppArmor Filesystem Enabled > [=A0=A0=A0 0.098459] pnp: PnP ACPI > =A0init > [=A0=A0=A0 0.098494] ACPI: bus type pnp registered > [=A0=A0=A0 0.098905] pnp 00:00: [mem 0x80100000-0xfebfffff window] > [=A0=A0=A0 0.098909] pnp 00:00: [bus 00-ff] > [=A0=A0=A0 0.098912] pnp 00:00: [io=A0 0x0cf8-0x0cff] > [=A0=A0=A0 0.098915] pnp 00:00: [io=A0 0x0000-0x0cf7 window] > [=A0=A0=A0 0.098918] pnp 00:00: [io=A0 0x0d00-0xffff window] > [=A0=A0=A0 0.098921] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [=A0=A0=A0 0.098986] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (a= ctive) > [=A0=A0=A0 0.099007] pnp 00:01: [io=A0 0x00f0-0x00ff] > [=A0=A0=A0 0.099029] pnp 00:01: [irq 13] > [=A0=A0=A0 0.099061] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (a= ctive) > [=A0=A0=A0 0.099079] pnp 00:02: [io=A0 0x0000-0x000f] > [=A0=A0=A0 0.099083] pnp 00:02: [io > =A00x0080-0x008f] > [=A0=A0=A0 0.099085] pnp 00:02: [io=A0 0x00c0-0x00df] > [=A0=A0=A0 0.099088] pnp 00:02: [dma 4] > [=A0=A0=A0 0.099127] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (a= ctive) > [=A0=A0=A0 0.099140] pnp 00:03: [io=A0 0x0070-0x0071] > [=A0=A0=A0 0.099150] pnp 00:03: [irq 8] > [=A0=A0=A0 0.099182] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (a= ctive) > [=A0=A0=A0 0.099195] pnp 00:04: [io=A0 0x0061] > [=A0=A0=A0 0.099231] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (a= ctive) > [=A0=A0=A0 0.099247] pnp 00:05: [irq 12] > [=A0=A0=A0 0.099281] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PN= P0f0e (active) > [=A0=A0=A0 0.099294] pnp 00:06: [io=A0 0x0060] > [=A0=A0=A0 0.099297] pnp 00:06: [io=A0 0x0064] > [=A0=A0=A0 0.099303] pnp 00:06: [irq 1] > [=A0=A0=A0 0.099335] pnp 00:06: > =A0Plug and Play ACPI device, IDs PNP0303 (active) > [=A0=A0=A0 0.099663] pnp 00:07: [irq 7] > [=A0=A0=A0 0.099666] pnp 00:07: [dma 3] > [=A0=A0=A0 0.099670] pnp 00:07: [io=A0 0x0378-0x037f] > [=A0=A0=A0 0.099672] pnp 00:07: [io=A0 0x0778-0x077d] > [=A0=A0=A0 0.099769] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (a= ctive) > [=A0=A0=A0 0.100075] pnp 00:08: [irq 4] > [=A0=A0=A0 0.100079] pnp 00:08: [io=A0 0x03f8-0x03ff] > [=A0=A0=A0 0.100178] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PN= P0500 (active) > [=A0=A0=A0 0.100405] pnp 00:09: [irq 6] > [=A0=A0=A0 0.100408] pnp 00:09: [dma 2] > [=A0=A0=A0 0.100411] pnp 00:09: [io=A0 0x03f0-0x03f5] > [=A0=A0=A0 0.100413] pnp 00:09: [io=A0 0x03f7] > [=A0=A0=A0 0.100461] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (a= ctive) > [=A0=A0=A0 0.100527] pnp > =A000:0a: [mem 0xfec00000-0xfec00fff] > [=A0=A0=A0 0.100563] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (a= ctive) > [=A0=A0=A0 0.100597] pnp 00:0b: [io=A0 0x0010-0x001f] > [=A0=A0=A0 0.100600] pnp 00:0b: [io=A0 0x0050-0x0053] > [=A0=A0=A0 0.100603] pnp 00:0b: [io=A0 0x0072-0x0077] > [=A0=A0=A0 0.100606] pnp 00:0b: [io=A0 0x0090-0x009f] > [=A0=A0=A0 0.100608] pnp 00:0b: [io=A0 0x04d0-0x04d1] > [=A0=A0=A0 0.100676] system 00:0b: [io=A0 0x04d0-0x04d1] has been reserve= d > [=A0=A0=A0 0.100681] system 00:0b: Plug and Play ACPI device, IDs PNP0c02= (active) > [=A0=A0=A0 0.100697] pnp 00:0c: [io=A0 0x0400-0x041f] > [=A0=A0=A0 0.100701] pnp 00:0c: [io=A0 0x0420-0x043f] > [=A0=A0=A0 0.100703] pnp 00:0c: [io=A0 0x0440-0x045f] > [=A0=A0=A0 0.100706] pnp 00:0c: [io=A0 0x0460-0x047f] > [=A0=A0=A0 0.100709] > =A0pnp 00:0c: [io=A0 0xf800-0xf81f] > [=A0=A0=A0 0.100717] pnp 00:0c: [io=A0 0xf820-0xf83f] > [=A0=A0=A0 0.100720] pnp 00:0c: [io=A0 0xf840-0xf85f] > [=A0=A0=A0 0.100722] pnp 00:0c: [io=A0 0xf860-0xf87f] > [=A0=A0=A0 0.100725] pnp 00:0c: [io=A0 0xfa00-0xfa3f] > [=A0=A0=A0 0.100728] pnp 00:0c: [io=A0 0xfc00-0xfc7f] > [=A0=A0=A0 0.100730] pnp 00:0c: [io=A0 0xfc80-0xfcff] > [=A0=A0=A0 0.100733] pnp 00:0c: [io=A0 0xfe00-0xfe7f] > [=A0=A0=A0 0.100735] pnp 00:0c: [io=A0 0xfe80-0xfeff] > [=A0=A0=A0 0.100749] pnp 00:0c: disabling [io=A0 0xf800-0xf81f] because i= t overlaps 0000:00:1f.0 BAR 13 [io=A0 0xf800-0xf87f] > [=A0=A0=A0 0.100753] pnp 00:0c: disabling [io=A0 0xf820-0xf83f] because i= t overlaps 0000:00:1f.0 BAR 13 [io=A0 0xf800-0xf87f] > [=A0=A0=A0 0.100757] pnp 00:0c: disabling [io=A0 0xf840-0xf85f] because i= t > =A0overlaps 0000:00:1f.0 BAR 13 [io=A0 0xf800-0xf87f] > [=A0=A0=A0 0.100762] pnp 00:0c: disabling [io=A0 0xf860-0xf87f] because i= t overlaps 0000:00:1f.0 BAR 13 [io=A0 0xf800-0xf87f] > [=A0=A0=A0 0.100816] system 00:0c: [io=A0 0x0400-0x041f] has been reserve= d > [=A0=A0=A0 0.100820] system 00:0c: [io=A0 0x0420-0x043f] has been reserve= d > [=A0=A0=A0 0.100823] system 00:0c: [io=A0 0x0440-0x045f] has been reserve= d > [=A0=A0=A0 0.100827] system 00:0c: [io=A0 0x0460-0x047f] has been reserve= d > [=A0=A0=A0 0.100830] system 00:0c: [io=A0 0xfa00-0xfa3f] has been reserve= d > [=A0=A0=A0 0.100834] system 00:0c: [io=A0 0xfc00-0xfc7f] could not be res= erved > [=A0=A0=A0 0.100838] system 00:0c: [io=A0 0xfc80-0xfcff] has been reserve= d > [=A0=A0=A0 0.100841] system 00:0c: [io=A0 0xfe00-0xfe7f] has been reserve= d > [=A0=A0=A0 0.100845] system > =A000:0c: [io=A0 0xfe80-0xfeff] has been reserved > [=A0=A0=A0 0.100849] system 00:0c: Plug and Play ACPI device, IDs PNP0c02= (active) > [=A0=A0=A0 0.101163] pnp 00:0d: [mem 0x00000000-0x0009ffff] > [=A0=A0=A0 0.101166] pnp 00:0d: [mem 0x00100000-0x7f7fffff] > [=A0=A0=A0 0.101169] pnp 00:0d: [mem 0x7f800000-0x7f8fffff] > [=A0=A0=A0 0.101172] pnp 00:0d: [mem 0x000e0000-0x000fffff] > [=A0=A0=A0 0.101175] pnp 00:0d: [mem 0xfec01000-0xffffffff] > [=A0=A0=A0 0.101177] pnp 00:0d: [mem 0x000ca600-0x000dffff] > [=A0=A0=A0 0.101233] system 00:0d: [mem 0x00000000-0x0009ffff] could not = be reserved > [=A0=A0=A0 0.101238] system 00:0d: [mem 0x00100000-0x7f7fffff] could not = be reserved > [=A0=A0=A0 0.101241] system 00:0d: [mem 0x7f800000-0x7f8fffff] has been r= eserved > [=A0=A0=A0 0.101245] system 00:0d: [mem 0x000e0000-0x000fffff] could not = be > =A0reserved > [=A0=A0=A0 0.101249] system 00:0d: [mem 0xfec01000-0xffffffff] could not = be reserved > [=A0=A0=A0 0.101252] system 00:0d: [mem 0x000ca600-0x000dffff] has been r= eserved > [=A0=A0=A0 0.101256] system 00:0d: Plug and Play ACPI device, IDs PNP0c01= (active) > [=A0=A0=A0 0.101266] pnp: PnP ACPI: found 14 devices > [=A0=A0=A0 0.101268] ACPI: ACPI bus type pnp unregistered > [=A0=A0=A0 0.101274] PnPBIOS: Disabled by ACPI PNP > [=A0=A0=A0 0.138234] PCI: max bus depth: 1 pci_try_num: 2 > [=A0=A0=A0 0.138263] pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x= 800003ff] > [=A0=A0=A0 0.138271] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x80= 0003ff] (PCI address [0x80000000-0x800003ff]) > [=A0=A0=A0 0.138276] pci 0000:05:02.0: BAR 0: assigned [mem 0xfc500000-0x= fc50ffff 64bit] > [=A0=A0=A0 0.138285] pci 0000:05:02.0: BAR 0: set to [mem > =A00xfc500000-0xfc50ffff 64bit] (PCI address [0xfc500000-0xfc50ffff]) > [=A0=A0=A0 0.138289] pci 0000:00:1e.0: PCI bridge to [bus 05-05] > [=A0=A0=A0 0.138293] pci 0000:00:1e.0:=A0=A0 bridge window [io=A0 0x1000-= 0x1fff] > [=A0=A0=A0 0.138299] pci 0000:00:1e.0:=A0=A0 bridge window [mem 0xfc50000= 0-0xfc7fffff] > [=A0=A0=A0 0.138304] pci 0000:00:1e.0:=A0=A0 bridge window [mem pref disa= bled] > [=A0=A0=A0 0.138325] pci 0000:00:1e.0: setting latency timer to 64 > [=A0=A0=A0 0.138330] pci_bus 0000:00: resource 0 [io=A0 0x0000-0xffff] > [=A0=A0=A0 0.138333] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffff= ff] > [=A0=A0=A0 0.138337] pci_bus 0000:05: resource 0 [io=A0 0x1000-0x1fff] > [=A0=A0=A0 0.138340] pci_bus 0000:05: resource 1 [mem 0xfc500000-0xfc7fff= ff] > [=A0=A0=A0 0.138343] pci_bus 0000:05: resource 4 [io > =A00x0000-0xffff] > [=A0=A0=A0 0.138346] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffff= ff] > [=A0=A0=A0 0.138415] NET: Registered protocol family 2 > [=A0=A0=A0 0.138506] IP route cache hash table entries: 32768 (order: 5, = 131072 bytes) > [=A0=A0=A0 0.138945] TCP established hash table entries: 131072 (order: 8= , 1048576 bytes) > [=A0=A0=A0 0.140389] TCP bind hash table entries: 65536 (order: 7, 524288= bytes) > [=A0=A0=A0 0.141137] TCP: Hash tables configured (established 131072 bind= 65536) > [=A0=A0=A0 0.141142] TCP reno registered > [=A0=A0=A0 0.141157] UDP hash table entries: 512 (order: 2, 16384 bytes) > [=A0=A0=A0 0.141188] UDP-Lite hash table entries: 512 (order: 2, 16384 by= tes) > [=A0=A0=A0 0.141423] NET: Registered protocol family 1 > [=A0=A0=A0 0.141462] pci 0000:00:02.0: Boot video device > [=A0=A0=A0 0.141589] PCI: CLS 64 > =A0bytes, default 64 > [=A0=A0=A0 0.142153] audit: initializing netlink socket (disabled) > [=A0=A0=A0 0.142171] type=3D2000 audit(1325464377.140:1): initialized > [=A0=A0=A0 0.163298] Trying to unpack rootfs image as initramfs... > [=A0=A0=A0 0.208390] highmem bounce pool size: 64 pages > [=A0=A0=A0 0.208400] HugeTLB registered 4 MB page size, pre-allocated 0 p= ages > [=A0=A0=A0 0.248371] VFS: Disk quotas dquot_6.5.2 > [=A0=A0=A0 0.248478] Dquot-cache hash table entries: 1024 (order 0, 4096 = bytes) > [=A0=A0=A0 0.256397] fuse init (API version 7.16) > [=A0=A0=A0 0.256604] msgmni has been set to 1680 > [=A0=A0=A0 0.264620] Block layer SCSI generic (bsg) driver version 0.4 lo= aded (major 253) > [=A0=A0=A0 0.264673] io scheduler noop registered > [=A0=A0=A0 0.264677] io scheduler deadline registered > [=A0=A0=A0 0.264702] io scheduler > =A0cfq registered (default) > [=A0=A0=A0 0.264902] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [=A0=A0=A0 0.264937] pciehp: PCI Express Hot Plug Controller Driver versi= on: 0.4 > [=A0=A0=A0 0.265144] input: Power Button as /devices/LNXSYSTM:00/device:0= 0/PNP0C0C:00/input/input0 > [=A0=A0=A0 0.265156] ACPI: Power Button [PBTN] > [=A0=A0=A0 0.265214] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN= :00/input/input1 > [=A0=A0=A0 0.265219] ACPI: Power Button [PWRF] > [=A0=A0=A0 0.265250] ACPI: acpi_idle registered with cpuidle > [=A0=A0=A0 0.266583] ERST: Table is not found! > [=A0=A0=A0 0.266802] Serial: 8250/16550 driver, 32 ports, IRQ sharing ena= bled > [=A0=A0=A0 0.287202] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 1655= 0A > [=A0=A0=A0 0.292134] isapnp: Scanning for PnP cards... > [=A0=A0=A0 0.420553] serial8250: ttyS1 at I/O > =A00x2f8 (irq =3D 3) is a 16550A > [=A0=A0=A0 0.462217] 00:08: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A > [=A0=A0=A0 0.528646] Linux agpgart interface v0.103 > [=A0=A0=A0 0.528734] agpgart-intel 0000:00:00.0: Intel 865 Chipset > [=A0=A0=A0 0.528771] agpgart-intel 0000:00:00.0: detected gtt size: 13107= 2K total, 131072K mappable > [=A0=A0=A0 0.528927] agpgart-intel 0000:00:00.0: detected 8192K stolen me= mory > [=A0=A0=A0 0.529110] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0= xf0000000 > [=A0=A0=A0 0.530769] brd: module loaded > [=A0=A0=A0 0.531536] loop: module loaded > [=A0=A0=A0 0.531792] ata_piix 0000:00:1f.1: version 2.13 > [=A0=A0=A0 0.531813] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007= ) > [=A0=A0=A0 0.531841] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, l= ow) -> IRQ 18 > [=A0=A0=A0 0.531918] ata_piix > =A00000:00:1f.1: setting latency timer to 64 > [=A0=A0=A0 0.540297] scsi0 : ata_piix > [=A0=A0=A0 0.540533] scsi1 : ata_piix > [=A0=A0=A0 0.540765] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x= 24c0 irq 14 > [=A0=A0=A0 0.540769] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x= 24c8 irq 15 > [=A0=A0=A0 0.540846] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, l= ow) -> IRQ 18 > [=A0=A0=A0 0.540854] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] > [=A0=A0=A0 0.703661] ata_piix 0000:00:1f.2: setting latency timer to 64 > [=A0=A0=A0 0.708449] ata2.00: ATAPI: ATAPI=A0=A0 MS-8148C1,=A0=A0=A0=A0 H= .05, max MWDMA2 > [=A0=A0=A0 0.712418] ata1.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/1= 00 > [=A0=A0=A0 0.712423] ata1.00: 78165360 sectors, multi 16: LBA > [=A0=A0=A0 0.712666] scsi2 : ata_piix > [=A0=A0=A0 0.716282] > =A0scsi3 : ata_piix > [=A0=A0=A0 0.716396] ata3: SATA max UDMA/133 cmd 0x24f8 ctl 0x2810 bmdma = 0x24d0 irq 18 > [=A0=A0=A0 0.716401] ata4: SATA max UDMA/133 cmd 0x2800 ctl 0x2814 bmdma = 0x24d8 irq 18 > [=A0=A0=A0 0.716995] Fixed MDIO Bus: probed > [=A0=A0=A0 0.717032] PPP generic driver version 2.4.2 > [=A0=A0=A0 0.717147] tun: Universal TUN/TAP device driver, 1.6 > [=A0=A0=A0 0.717150] tun: (C) 1999-2004 Max Krasnyansky <[email protected]= m> > [=A0=A0=A0 0.717304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) = Driver > [=A0=A0=A0 0.717365] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, l= ow) -> IRQ 23 > [=A0=A0=A0 0.717396] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [=A0=A0=A0 0.717401] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [=A0=A0=A0 0.717452] ehci_hcd 0000:00:1d.7: new USB bus registered, assig= ned bus number > =A01 > [=A0=A0=A0 0.717501] ehci_hcd 0000:00:1d.7: debug port 1 > [=A0=A0=A0 0.721403] ehci_hcd 0000:00:1d.7: cache line size of 64 is not = supported > [=A0=A0=A0 0.721769] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000 > [=A0=A0=A0 0.725795] ata2.00: configured for MWDMA2 > [=A0=A0=A0 0.728298] ata1.00: configured for UDMA/100 > [=A0=A0=A0 0.740125] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [=A0=A0=A0 0.740435] hub 1-0:1.0: USB hub found > [=A0=A0=A0 0.740443] hub 1-0:1.0: 8 ports detected > [=A0=A0=A0 0.740562] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driv= er > [=A0=A0=A0 0.740587] uhci_hcd: USB Universal Host Controller Interface dr= iver > [=A0=A0=A0 0.740691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, l= ow) -> IRQ 16 > [=A0=A0=A0 0.740704] uhci_hcd 0000:00:1d.0: setting latency timer to > =A064 > [=A0=A0=A0 0.740709] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [=A0=A0=A0 0.740781] uhci_hcd 0000:00:1d.0: new USB bus registered, assig= ned bus number 2 > [=A0=A0=A0 0.740828] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440 > [=A0=A0=A0 0.740998] hub 2-0:1.0: USB hub found > [=A0=A0=A0 0.741005] hub 2-0:1.0: 2 ports detected > [=A0=A0=A0 0.741095] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, l= ow) -> IRQ 19 > [=A0=A0=A0 0.741105] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [=A0=A0=A0 0.741109] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [=A0=A0=A0 0.741164] uhci_hcd 0000:00:1d.1: new USB bus registered, assig= ned bus number 3 > [=A0=A0=A0 0.741202] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460 > [=A0=A0=A0 0.741365] hub 3-0:1.0: USB hub found > [=A0=A0=A0 0.741371] hub 3-0:1.0: 2 ports > =A0detected > [=A0=A0=A0 0.741448] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, l= ow) -> IRQ 18 > [=A0=A0=A0 0.741458] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [=A0=A0=A0 0.741462] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [=A0=A0=A0 0.741519] uhci_hcd 0000:00:1d.2: new USB bus registered, assig= ned bus number 4 > [=A0=A0=A0 0.741545] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002480 > [=A0=A0=A0 0.741710] hub 4-0:1.0: USB hub found > [=A0=A0=A0 0.741716] hub 4-0:1.0: 2 ports detected > [=A0=A0=A0 0.741865] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2= M] at 0x60,0x64 irq 1,12 > [=A0=A0=A0 0.749129] serio: i8042 KBD port at 0x60,0x64 irq 1 > [=A0=A0=A0 0.749151] serio: i8042 AUX port at 0x60,0x64 irq 12 > [=A0=A0=A0 0.749421] mousedev: PS/2 mouse device common for all mice > [=A0=A0=A0 0.749633] rtc_cmos > =A000:03: RTC can wake from S4 > [=A0=A0=A0 0.749751] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc= 0 > [=A0=A0=A0 0.749777] rtc0: alarms up to one month, y3k, 114 bytes nvram, = hpet irqs > [=A0=A0=A0 0.749965] device-mapper: uevent: version 1.0.3 > [=A0=A0=A0 0.750074] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) init= ialised: [email protected] > [=A0=A0=A0 0.750122] EISA: Probing bus 0 at eisa.0 > [=A0=A0=A0 0.750134] Cannot allocate resource for EISA slot 1 > [=A0=A0=A0 0.750136] Cannot allocate resource for EISA slot 2 > [=A0=A0=A0 0.750164] EISA: Detected 0 cards. > [=A0=A0=A0 0.750185] cpufreq-nforce2: No nForce2 chipset. > [=A0=A0=A0 0.750189] cpuidle: using governor ladder > [=A0=A0=A0 0.750191] cpuidle: using governor menu > [=A0=A0=A0 0.750194] EFI Variables Facility v0.08 2004-May-17 > [=A0=A0=A0 0.750562] > =A0TCP cubic registered > [=A0=A0=A0 0.750756] NET: Registered protocol family 10 > [=A0=A0=A0 0.751468] NET: Registered protocol family 17 > [=A0=A0=A0 0.751500] Registering the dns_resolver key type > [=A0=A0=A0 0.751544] Using IPI No-Shortcut mode > [=A0=A0=A0 0.751696] PM: Hibernation image not present or could not be lo= aded. > [=A0=A0=A0 0.751726] registered taskstats version 1 > [=A0=A0=A0 0.903633] isapnp: No Plug & Play device found > [=A0=A0=A0 0.925489] scsi 0:0:0:0: Direct-Access=A0=A0=A0=A0 ATA=A0=A0=A0= =A0=A0 Maxtor 6E040L0=A0=A0 NAR6 PQ: 0 ANSI: 5 > [=A0=A0=A0 0.925780] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [=A0=A0=A0 0.926019] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: = (40.0 GB/37.2 GiB) > [=A0=A0=A0 0.926095] sd 0:0:0:0: [sda] Write Protect is off > [=A0=A0=A0 0.926100] > =A0sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [=A0=A0=A0 0.926132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: = enabled, doesn't support DPO or FUA > [=A0=A0=A0 0.927955] scsi 1:0:0:0: CD-ROM=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 ATAPI=A0=A0=A0 MS-8148C1=A0=A0=A0=A0=A0=A0=A0 H.05 PQ: 0 ANSI: 5 > [=A0=A0=A0 0.930208] sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tra= y > [=A0=A0=A0 0.930216] cdrom: Uniform CD-ROM driver Revision: 3.20 > [=A0=A0=A0 0.930431] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [=A0=A0=A0 0.930550] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [=A0=A0=A0 0.966041]=A0 sda: sda1 sda2 < sda5 > > [=A0=A0=A0 0.966596] sd 0:0:0:0: [sda] Attached SCSI disk > [=A0=A0=A0 1.069265] Freeing initrd memory: 13324k freed > [=A0=A0=A0 1.105122]=A0=A0 Magic number: > =A012:590:505 > [=A0=A0=A0 1.105140] i8042 i8042: hash matches > [=A0=A0=A0 1.105268] rtc_cmos 00:03: setting system clock to 2012-01-02 0= 0:32:59 UTC (1325464379) > [=A0=A0=A0 1.105297] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [=A0=A0=A0 1.105299] EDD information not available. > [=A0=A0=A0 1.105463] Freeing unused kernel memory: 696k freed > [=A0=A0=A0 1.106472] Write protecting the kernel text: 5336k > [=A0=A0=A0 1.106509] Write protecting the kernel read-only data: 2192k > [=A0=A0=A0 1.140096] Refined TSC clocksource calibration: 2792.999 MHz. > [=A0=A0=A0 1.140107] Switching to clocksource tsc > [=A0=A0=A0 1.144331] udevd[86]: starting version 173 > [=A0=A0=A0 1.356134] hub 1-0:1.0: over-current condition on port 7 > [=A0=A0=A0 1.366397] Floppy drive(s): fd0 is 1.44M > [=A0=A0=A0 1.399530] FDC 0 is a post-1991 > =A082077 > [=A0=A0=A0 1.469169] tg3.c:v3.119 (May 18, 2011) > [=A0=A0=A0 1.469186] tg3 0000:05:02.0: enabling device (0104 -> 0106) > [=A0=A0=A0 1.469217] tg3 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -= > IRQ 20 > [=A0=A0=A0 1.520057] tg3 0000:05:02.0: eth0: Tigon3 [partno(BCM95782A50) = rev 3003] (PCI:33MHz:32-bit) MAC address 00:0e:7f:a9:75:05 > [=A0=A0=A0 1.520065] tg3 0000:05:02.0: eth0: attached PHY is 5705 (10/100= /1000Base-T Ethernet) (WireSpeed[0], EEE[0]) > [=A0=A0=A0 1.520070] tg3 0000:05:02.0: eth0: RXcsums[1] LinkChgREG[0] MIi= rq[0] ASF[0] TSOcap[1] > [=A0=A0=A0 1.520074] tg3 0000:05:02.0: eth0: dma_rwctrl[763f0000] dma_mas= k[64-bit] > [=A0=A0=A0 1.596045] usb 3-1: new low speed USB device number 2 using uhc= i_hcd > [=A0=A0=A0 1.780733] EXT4-fs (sda1): mounted filesystem with ordered data= mode. Opts: (null) > [=A0=A0=A0 1.799896] input: > =A0KYE Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0= /input/input2 > [ > =A01.800148] generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID v1.1= 0 > =A0Mouse [KYE Optical Mouse] on usb-0000:00:1d.1-1/input0 > [=A0=A0=A0 1.800178] usbcore: registered new interface driver usbhid > [=A0=A0=A0 1.800181] usbhid: USB HID core driver > [=A0=A0=A0 2.012044] usb 3-2: new low speed USB device number 3 using uhc= i_hcd > [=A0=A0=A0 2.226786] input: LITEON Technology USB Keyboard as /devices/pc= i0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3 > [ > =A02.226952] generic-usb 0003:04CA:0020.0002: input,hidraw1: USB HID v1.1= 0 > =A0Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1d.1-2/input0 > [=A0=A0=A0 2.259122] input: LITEON Technology USB Keyboard as /devices/pc= i0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input4 > [=A0=A0=A0 2.259276] generic-usb > =A00003:04CA:0020.0003: input,hidraw2: USB HID v1.10 Device [LITEON Techn= ology USB Keyboard] on usb-0000:00:1d.1-2/input1 > [=A0=A0 10.818338] udevd[270]: starting version 173 > [=A0=A0 10.913677] lp: driver loaded but no devices found > [=A0=A0 10.980204] Adding 2086908k swap on /dev/sda5.=A0 Priority:-1 exte= nts:1 across:2086908k > [=A0=A0 11.194353] EXT4-fs (sda1): re-mounted. Opts: errors=3Dremount-ro > [=A0=A0 11.363901] [drm] Initialized drm 1.1.0 20060810 > [=A0=A0 11.423552] parport_pc 00:07: reported by Plug and Play ACPI > [=A0=A0 11.423611] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCS= PP,TRISTATE,COMPAT,ECP,DMA] > [ > =A011.650872] type=3D1400 audit(1325464390.040:2): apparmor=3D"STATUS" > operation=3D"profile_load" name=3D"/sbin/dhclient" pid=3D479 > comm=3D"apparmor_parser" > [=A0=A0 11.651481] type=3D1400 audit(1325464390.040:3): apparmor=3D"STATU= S" operation=3D"profile_load" > =A0name=3D"/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3D479 comm= =3D"apparmor_parser" > [ > =A011.651805] type=3D1400 audit(1325464390.040:4): apparmor=3D"STATUS" > operation=3D"profile_load" name=3D"/usr/lib/connman/scripts/dhclient-scri= pt" > =A0pid=3D479 comm=3D"apparmor_parser" > [=A0=A0 11.734578] intel_rng: Firmware space is locked read-only. If you = can't or > [=A0=A0 11.734581] intel_rng: don't want to disable this in firmware setu= p, and if > [=A0=A0 11.734583] intel_rng: you are certain that your system has a func= tional > [=A0=A0 11.734585] intel_rng: RNG, try using the 'no_fwh_detect' option. > [=A0=A0 11.738314] lp0: using parport0 (interrupt-driven). > [=A0=A0 11.765013] shpchp: Standard Hot Plug PCI Controller Driver versio= n: 0.4 > [=A0=A0 12.073426] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->= IRQ 16 > [=A0=A0 12.073437] i915 0000:00:02.0: setting latency timer to 64 > [ > =A012.288603] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [=A0=A0 12.288608] [drm] Driver supports precise vblank timestamp query. > [=A0=A0 12.288705] vgaarb: device changed decodes: PCI:0000:00:02.0,oldde= codes=3Dio+mem,decodes=3Dio+mem:owns=3Dio+mem > [=A0=A0 12.426002] [drm] initialized overlay support > [=A0=A0 13.460084] ppdev: user-space parallel port driver > [=A0=A0 13.536990] fbcon: inteldrmfb (fb0) is primary device > [=A0=A0 13.538444] Console: switching to colour frame buffer device 180x5= 6 > [=A0=A0 13.538489] fb0: inteldrmfb frame buffer device > [=A0=A0 13.538492] drm: registered panic notifier > [=A0=A0 13.538548] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0= on minor 0 > [=A0=A0 13.538643] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, lo= w) -> IRQ 17 > [=A0=A0 13.538693] Intel ICH 0000:00:1f.5: setting latency timer to > =A064 > [=A0=A0 13.598822] ADDRCONF(NETDEV_UP): eth0: link is not ready > [=A0=A0 13.851444] init: failsafe main process (700) killed by TERM signa= l > [=A0=A0 13.960036] intel8x0_measure_ac97_clock: measured 52477 usecs (252= 9 samples) > [=A0=A0 13.960043] intel8x0: clocking to 48000 > [ > =A014.238410] type=3D1400 audit(1325464392.628:5): apparmor=3D"STATUS" > operation=3D"profile_load" > name=3D"/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=3D769 > comm=3D"apparmor_parser" > [=A0=A0 14.243471] type=3D1400 > audit(1325464392.632:6): apparmor=3D"STATUS" operation=3D"profile_load" > name=3D"/usr/lib/cups/backend/cups-pdf" pid=3D768 comm=3D"apparmor_parser= " > [ > =A014.249569] type=3D1400 audit(1325464392.640:7): apparmor=3D"STATUS" > operation=3D"profile_replace" name=3D"/sbin/dhclient" pid=3D770 > comm=3D"apparmor_parser" > [=A0=A0 14.250498] type=3D1400 audit(1325464392.640:8): apparmor=3D"STATU= S" operation=3D"profile_load" name=3D"/usr/sbin/cupsd" > =A0pid=3D768 comm=3D"apparmor_parser" > [=A0=A0 14.267718] type=3D1400 > audit(1325464392.656:9): apparmor=3D"STATUS" operation=3D"profile_replace= " > name=3D"/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3D770 > comm=3D"apparmor_parser" > [=A0=A0 14.268367] type=3D1400 > audit(1325464392.660:10): apparmor=3D"STATUS" operation=3D"profile_replac= e" > name=3D"/usr/lib/connman/scripts/dhclient-script" pid=3D770 > comm=3D"apparmor_parser" > [=A0=A0 14.289071] type=3D1400 > audit(1325464392.680:11): apparmor=3D"STATUS" operation=3D"profile_load" > name=3D"/usr/bin/evince" pid=3D774 comm=3D"apparmor_parser" > [=A0=A0 14.608394] init: apport pre-start process (818) terminated with s= tatus 1 > [=A0=A0 14.694667] init: apport post-stop process (845) terminated with s= tatus 1 > [=A0=A0 15.023605] tg3 0000:05:02.0: eth0: Link is up at 100 Mbps, full d= uplex > [=A0=A0 15.023611] tg3 0000:05:02.0: eth0: Flow control is on for TX and = on for RX > [=A0=A0 15.048711] > =A0ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [=A0=A0 19.266977] EXT4-fs (sda1): re-mounted. Opts: errors=3Dremount-ro,= commit=3D0 > [=A0=A0 25.272021] eth0: no IPv6 routers present > [=A0=A0 38.191739] Bluetooth: Core ver 2.16 > [=A0=A0 38.191837] NET: Registered protocol family 31 > [=A0=A0 38.191840] Bluetooth: HCI device and connection manager initializ= ed > [=A0=A0 38.191844] Bluetooth: HCI socket layer initialized > [=A0=A0 38.191846] Bluetooth: L2CAP socket layer initialized > [=A0=A0 38.195259] Bluetooth: SCO socket layer initialized > [=A0=A0 38.204975] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [=A0=A0 38.204982] Bluetooth: BNEP filters: protocol multicast > [=A0=A0 38.207675] Bluetooth: RFCOMM TTY layer initialized > [=A0=A0 38.207694] Bluetooth: RFCOMM socket layer initialized > [=A0=A0 38.207697] Bluetooth: RFCOMM ver 1.11 > [ > =A038.464104] init: plymouth-stop pre-start process (2680) terminated wit= h status 1 > > Module=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Size=A0 Used by > bnep=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 17923=A0 2 > rfcomm=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 38408=A0 0 > bluetooth=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 148839=A0 10 bnep,rfcomm > snd_hda_intel=A0=A0=A0=A0=A0=A0=A0=A0=A0 24262=A0 0 > snd_hda_codec=A0=A0=A0=A0=A0=A0=A0=A0=A0 91754=A0 1 snd_hda_intel > snd_hwdep=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 13276=A0 1 > =A0snd_hda_codec > ppdev=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 12849=A0 0 > snd_intel8x0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 33318=A0 0 > snd_ac97_codec=A0=A0=A0=A0=A0=A0=A0 106082=A0 1 snd_intel8x0 > ac97_bus=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 12642=A0 1 snd_ac97_co= dec > snd_pcm=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 80435=A0 4 snd_hda_i= ntel,snd_hda_codec,snd_intel8x0,snd_ac97_codec > snd_seq_midi=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 13132=A0 0 > snd_rawmidi=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 25241=A0 1 snd_seq_midi > snd_seq_midi_event=A0=A0=A0=A0 14475=A0 1 > =A0snd_seq_midi > snd_seq=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 51567=A0 2 snd_seq_m= idi,snd_seq_midi_event > snd_timer=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 28932=A0 2 snd_pcm,snd_s= eq > snd_seq_device=A0=A0=A0=A0=A0=A0=A0=A0 14172=A0 3 snd_seq_midi,snd_rawmid= i,snd_seq > psmouse=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 73673=A0 0 > i915=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 505159=A0 2 > snd=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 55902=A0 10 > =A0snd_hda_intel,snd_hda_codec,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_= pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > serio_raw=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 12990=A0 0 > soundcore=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 12600=A0 1 snd > snd_page_alloc=A0=A0=A0=A0=A0=A0=A0=A0 14115=A0 3 snd_hda_intel,snd_intel= 8x0,snd_pcm > binfmt_misc=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 17292=A0 1 > shpchp=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 32356=A0 0 > drm_kms_helper=A0=A0=A0=A0=A0=A0=A0=A0 32889=A0 1 i915 > parport_pc=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 32114=A0 1 > drm > =A0192194=A0 3 i915,drm_kms_helper > i2c_algo_bit=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 13199=A0 1 i915 > video=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 18908=A0 1 i915 > lp=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 17455=A0 0 > parport=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 40930=A0 3 ppdev,par= port_pc,lp > usbhid=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 41905=A0 0 > hid=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 77367=A0 1 u= sbhid > tg3=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 132972=A0 0 > floppy=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 60310=A0 0 > > --------------- --------------=A0 ---------------=A0 -------------- > > oscopat.h > > /* > =A0*=A0 oscompat.h: Compatibility defines to handle various Linux version= s > =A0*/ > > /* > =A0* Copyright (c) 2003-2004 Linuxant inc. > =A0* > =A0* 1.=A0 General Public License. This program is free software, and may > =A0* be redistributed or modified subject to the terms of the GNU General > =A0* Public License (version 2) or the GNU Lesser General Public License, > =A0* or (at your option) any later versions ("Open Source" code). You may > =A0* obtain a copy of the GNU General Public License at > =A0* http://www.fsf.org/copyleft/gpl.html and a copy of the GNU Lesser > =A0* General Public License at http://www.fsf.org/copyleft/less.html, > =A0* or you may > =A0alternatively write to the Free Software Foundation, Inc., > =A0* 59 Temple Place, Suite 330, Boston, MA=A0 02111-1307 USA. > =A0* > =A0* 2.=A0=A0 Disclaimer of Warranties. LINUXANT AND OTHER CONTRIBUTORS M= AKE NO > =A0* REPRESENTATION ABOUT THE SUITABILITY OF THIS SOFTWARE FOR ANY PURPOS= E. > =A0* IT IS PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY = KIND. > =A0* LINUXANT AND OTHER CONTRIBUTORS DISCLAIMS ALL WARRANTIES WITH REGARD= TO > =A0* THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, = FITNESS > =A0* FOR A PARTICULAR PURPOSE, GOOD TITLE AND AGAINST INFRINGEMENT. > =A0* > =A0* This software has not been formally tested, and there is no guarante= e that > =A0* it is free of errors including, but not limited to, bugs, defects, > =A0* interrupted operation, or unexpected results. Any use of this softwa= re is > =A0* at user's own risk. > =A0* > =A0* > =A03.=A0=A0 No Liability. > =A0* > =A0* (a) Linuxant or contributors shall not be responsible for any loss o= r > =A0* damage to user, or any third parties for any reason whatsoever, and > =A0* LINUXANT OR CONTRIBUTORS SHALL NOT BE LIABLE FOR ANY ACTUAL, DIRECT, > =A0* INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL > =A0* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR > =A0* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) > =A0* HOWEVER CAUSED, WHETHER IN CONTRACT, STRICT OR OTHER LEGAL THEORY OF > =A0* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN AN= Y > =A0* WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBIL= ITY > =A0* OF SUCH DAMAGE. > =A0* > =A0* (b) User agrees to hold Linuxant and contributors harmless from any > =A0* liability, loss, cost, damage or expense, including attorney's fees, > =A0* as a > =A0result of any claims which may be made by any person, including > =A0* but not limited to User, its agents and employees, its customers, or > =A0* any third parties that arise out of or result from the manufacture, > =A0* delivery, actual or alleged ownership, performance, use, operation > =A0* or possession of the software furnished hereunder, whether such clai= ms > =A0* are based on negligence, breach of contract, absolute liability or a= ny > =A0* other legal theory. > =A0* > =A0* 4.=A0=A0 Notices. User hereby agrees not to remove, alter or destroy= any > =A0* copyright, trademark, credits, other proprietary notices or confiden= tial > =A0* legends placed upon, contained within or associated with the Softwar= e, > =A0* and shall include all such unaltered copyright, trademark, credits, > =A0* other proprietary notices or confidential legends on or in every cop= y of > =A0* the Software. > =A0* > =A0*/ > #ifndef __OSCOMPAT_H > #define __OSCOMPAT_H > > #ifdef __cplusplus > extern "C" > { > #endif > > #include "osuniqredef.h" > > #include <linux/version.h> > #ifdef FOUND_LINUX_CONFIG > #include <linux/config.h> > #endif > #include <linux/types.h> > > #if defined(STATIC_ERRNO) > #ifndef _LINUX_UNISTD_H_ > #define _LINUX_UNISTD_H_ > #endif > static int errno; > #include <asm/unistd.h> > #endif > > #include <linux/sched.h> > #include <linux/slab.h> > #include <linux/mm.h> > #include <linux/interrupt.h> > #include <linux/wait.h> > #include <linux/module.h> > #include <linux/init.h> > #include <linux/kernel.h> > #include <linux/string.h> > #include <linux/kdev_t.h> > > #ifdef FOUND_LINUX_BYTEORDER_SWAB > #include <linux/byteorder/swab.h> > #else > #include <linux/swab.h> > #endif > > #include > =A0<linux/proc_fs.h> > > #ifdef FOUND_LINUX_SEMAPHORE > #include <linux/semaphore.h> > #endif > > #ifdef FOUND_MODULE_PARAM > #include <linux/moduleparam.h> > #endif > > #if LINUX_VERSION_CODE =3D=3D KERNEL_VERSION(2,4,9) > /* get rid of non-standard min/max macros */ > #undef min > #undef max > #endif > > #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) > #include <linux/tqueue.h> > #else > > #include <linux/spinlock.h> > #include <linux/list.h> > #include <asm/bitops.h> > #include <asm/system.h> > > /* > =A0* New proposed "bottom half" handlers: > =A0* (C) 1994 Kai Petzke, [email protected] > =A0* > =A0* Advantages: > =A0* - Bottom halfs are implemented as a linked list.=A0 You can have as = many > =A0*=A0=A0 of them, as you want. > =A0* - No more scanning of a bit field is required upon call of a bottom = half. > =A0* - Support > =A0for chained bottom half lists.=A0 The run_task_queue() function can be > =A0*=A0=A0 used as a bottom half handler.=A0 This is for example useful f= or bottom > =A0*=A0=A0 halfs, which want to be delayed until the next clock tick. > =A0* > =A0* Notes: > =A0* - Bottom halfs are called in the reverse order that they were linked= into > =A0*=A0=A0 the list. > =A0*/ > > struct tq_struct { > =A0=A0=A0 struct list_head list;=A0=A0=A0 =A0=A0=A0 /* linked list of act= ive bh's */ > =A0=A0=A0 unsigned long sync;=A0=A0=A0 =A0=A0=A0 /* must be initialized t= o zero */ > =A0=A0=A0 void (*routine)(void *);=A0=A0=A0 /* function to call */ > =A0=A0=A0 void *data;=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 /* argument to functio= n */ > }; > > /* > =A0* Emit code to initialise a tq_struct's routine and data > =A0pointers > =A0*/ > #define PREPARE_TQUEUE(_tq, _routine, _data)=A0=A0=A0 =A0=A0=A0 =A0=A0=A0= \ > =A0=A0=A0 do {=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0= =A0=A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->routine =3D _routine;=A0=A0=A0 =A0=A0=A0 =A0= =A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->data =3D _data;=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 = =A0=A0=A0 \ > =A0=A0=A0 } while (0) > > /* > =A0* Emit code to initialise all of a tq_struct > =A0*/ > #define INIT_TQUEUE(_tq, _routine, _data)=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 \ > =A0=A0=A0 do {=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0= =A0=A0=A0 \ > > =A0=A0=A0=A0 INIT_LIST_HEAD(&(_tq)->list);=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->sync =3D 0;=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0= =A0=A0 \ > =A0=A0=A0 =A0=A0=A0 PREPARE_TQUEUE((_tq), (_routine), (_data));=A0=A0=A0 = \ > =A0=A0=A0 } while (0) > > typedef struct list_head task_queue; > > #define DECLARE_TASK_QUEUE(q)=A0=A0=A0 LIST_HEAD(q) > #define TQ_ACTIVE(q)=A0=A0=A0 =A0=A0=A0 (!list_empty(&q)) > > extern task_queue tq_timer, tq_immediate, tq_disk; > > /* > =A0* To implement your own list of active bottom halfs, use the following > =A0* two definitions: > =A0* > =A0* DECLARE_TASK_QUEUE(my_tqueue); > =A0* struct tq_struct my_task =3D { > =A0* =A0=A0=A0 routine: (void (*)(void *)) my_routine, > =A0*=A0=A0=A0 data: > =A0&my_data > =A0* }; > =A0* > =A0* To activate a bottom half on a list, use: > =A0* > =A0*=A0=A0=A0 queue_task(&my_task, &my_tqueue); > =A0* > =A0* To later run the queued tasks use > =A0* > =A0*=A0=A0=A0 run_task_queue(&my_tqueue); > =A0* > =A0* This allows you to do deferred processing.=A0 For example, you could > =A0* have a task queue called tq_timer, which is executed within the time= r > =A0* interrupt. > =A0*/ > > > =A0#ifdef STATIC_TQUEUE_LOCK > =A0static spinlock_t tqueue_lock __attribute__((unused)) =3D SPIN_LOCK_UN= LOCKED; > =A0#else > =A0extern spinlock_t tqueue_lock; > =A0#endif > > > /* > =A0* Queue a task on a tq.=A0 Return non-zero if it was successfully > =A0* added. > =A0*/ > static inline int queue_task(struct tq_struct *bh_pointer, task_queue *bh= _list) > { > =A0=A0=A0 int ret =3D > =A00; > =A0=A0=A0 if (!test_and_set_bit(0,&bh_pointer->sync)) { > =A0=A0=A0 =A0=A0=A0 unsigned long flags; > =A0=A0=A0 =A0=A0=A0 spin_lock_irqsave(&tqueue_lock, flags); > =A0=A0=A0 =A0=A0=A0 list_add_tail(&bh_pointer->list, bh_list); > =A0=A0=A0 =A0=A0=A0 spin_unlock_irqrestore(&tqueue_lock, flags); > =A0=A0=A0 =A0=A0=A0 ret =3D 1; > =A0=A0=A0 } > =A0=A0=A0 return ret; > } > > /* > =A0* Call all "bottom halfs" on a given list. > =A0*/ > > static inline void run_task_queue(task_queue *list) > { > =A0=A0=A0 if (TQ_ACTIVE(*list)) { > =A0=A0=A0 struct list_head head, *next; > =A0=A0=A0 unsigned long flags; > > =A0=A0=A0 spin_lock_irqsave(&tqueue_lock, flags); > =A0=A0=A0 list_add(&head, list); > > =A0list_del_init(list); > =A0=A0=A0 spin_unlock_irqrestore(&tqueue_lock, flags); > > =A0=A0=A0 next =3D head.next; > =A0=A0=A0 while (next !=3D &head) { > =A0=A0=A0 =A0=A0=A0 void (*f) (void *); > =A0=A0=A0 =A0=A0=A0 struct tq_struct *p; > =A0=A0=A0 =A0=A0=A0 void *data; > > =A0=A0=A0 =A0=A0=A0 p =3D list_entry(next, struct tq_struct, list); > =A0=A0=A0 =A0=A0=A0 next =3D next->next; > =A0=A0=A0 =A0=A0=A0 f =3D p->routine; > =A0=A0=A0 =A0=A0=A0 data =3D p->data; > =A0=A0=A0 =A0=A0=A0 wmb(); > =A0=A0=A0 =A0=A0=A0 p->sync =3D 0; > =A0=A0=A0 =A0=A0=A0 if (f) > =A0=A0=A0 =A0=A0=A0 f(data); > =A0=A0=A0 } > =A0=A0=A0 } > } > > > #define devfs_register_chrdev register_chrdev > > #endif /* > =A0LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) */ > > #if LINUX_VERSION_CODE >=3D KERNEL_VERSION(2,6,0) && !defined(FOUND_DEVFS= ) > #define devfs_register_chrdev register_chrdev > #endif > > #if LINUX_VERSION_CODE >=3D KERNEL_VERSION(2,4,2) > #include <linux/circ_buf.h> > #else > > struct circ_buf { > =A0=A0=A0 char *buf; > =A0=A0=A0 int head; > =A0=A0=A0 int tail; > }; > > /* Return count in buffer.=A0 */ > #define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1)) > > /* Return space available, 0..size-1.=A0 We always leave one free char > =A0=A0 as a completely full buffer has head =3D=3D tail, which is the sam= e as > =A0=A0 empty.=A0 */ > #define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size)) > > /* Return count up to the end of the buffer.=A0 Carefully avoid > =A0=A0 accessing head and tail more than once, so they can > =A0change > =A0=A0 underneath us without returning inconsistent results.=A0 */ > #define CIRC_CNT_TO_END(head,tail,size) \ > =A0=A0=A0 ({int end =3D (size) - (tail); \ > =A0=A0=A0 =A0 int n =3D ((head) + end) & ((size)-1); \ > =A0=A0=A0 =A0 n < end ? n : end;}) > > /* Return space available up to the end of the buffer.=A0 */ > #define CIRC_SPACE_TO_END(head,tail,size) \ > =A0=A0=A0 ({int end =3D (size) - 1 - (head); \ > =A0=A0=A0 =A0 int n =3D (end + (tail)) & ((size)-1); \ > =A0=A0=A0 =A0 n <=3D end ? n : end+1;}) > > #endif > > #ifdef CONFIG_KDB > #define KDB_ENTER() asm("\tint $129\n") > #else > #define KDB_ENTER() do {} while(0) > #endif > > #ifndef minor > #define minor(d) MINOR(d) > #endif > > #ifndef unlikely > #define unlikely(x) (x) > #endif > > #ifdef MODULE > #ifndef THIS_MODULE > #define THIS_MODULE > =A0(&__this_module) > #endif > #ifndef module_init > #define module_init(x)=A0 int init_module(void) { return x(); } > #endif > #ifndef module_exit > #define module_exit(x)=A0 void cleanup_module(void) { x(); } > #endif > #endif > > #ifndef MODULE_LICENSE > #define MODULE_LICENSE(x) > #endif > > #ifndef MODULE_INFO > #define MODULE_INFO(x,y) > #endif > > #ifndef EXPORT_SYMBOL_NOVERS > #define EXPORT_SYMBOL_NOVERS(x) EXPORT_SYMBOL(x) > #endif > > #ifndef __exit > #define __exit > #endif > > #ifndef __devexit_p > #define __devexit_p(x) x > #endif > > #ifndef DECLARE_MUTEX > #define DECLARE_MUTEX(name)=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 struct semaphore name=3DMUTEX > #define > =A0init_MUTEX(x)=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 *(x)=3DMUTEX > #endif > > #ifndef DECLARE_WAITQUEUE > #define DECLARE_WAITQUEUE(wait, current) struct wait_queue wait =3D { cur= rent, NULL } > #define DECLARE_WAIT_QUEUE_HEAD(wait)=A0=A0=A0=A0=A0=A0 wait_queue_head_t= wait > typedef struct wait_queue *wait_queue_head_t; > #define init_waitqueue_head(x)=A0=A0=A0=A0=A0=A0=A0=A0=A0 *(x)=3DNULL > #endif > > #ifndef set_current_state > #define __set_current_state(state_value)=A0=A0=A0 do { current->state =3D= state_value; } while (0) > #ifdef __SMP__ > #define set_current_state(state_value)=A0=A0=A0 =A0=A0=A0 do { __set_curr= ent_state(state_value); mb(); } while (0) > #else > #define set_current_state(state_value) > =A0=A0=A0=A0 __set_current_state(state_value) > #endif > #endif // set_current_state > > #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) > #define get_zeroed_page get_free_page > #define try_inc_mod_count(mod) ((mod && !(mod->flags & MOD_DELETED)) ? __= MOD_INC_USE_COUNT(mod), 1 : 0) > #endif // LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) > > #ifndef PREPARE_TQUEUE > /* > =A0* Emit code to initialise a tq_struct's routine and data pointers > =A0*/ > #define PREPARE_TQUEUE(_tq, _routine, _data)=A0=A0=A0 =A0=A0=A0 =A0=A0=A0= \ > =A0=A0=A0 do {=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0= =A0=A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->routine =3D _routine;=A0=A0=A0 =A0=A0=A0 =A0= =A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->data =3D > =A0_data;=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 \ > =A0=A0=A0 } while (0) > #endif > > #ifndef INIT_TQUEUE > /* > =A0* Emit code to initialise all of a tq_struct > =A0*/ > #if LINUX_VERSION_CODE >=3D KERNEL_VERSION(2,4,0) > #define INIT_TQUEUE(_tq, _routine, _data)=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 \ > =A0=A0=A0 do {=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0= =A0=A0=A0 \ > =A0=A0=A0 =A0=A0=A0 INIT_LIST_HEAD(&(_tq)->list);=A0=A0=A0 =A0=A0=A0 =A0= =A0=A0 =A0=A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->sync =3D 0;=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0= =A0=A0 \ > =A0=A0=A0 =A0=A0=A0 PREPARE_TQUEUE((_tq), (_routine), (_data));=A0=A0=A0 = \ > =A0=A0=A0 } > =A0while (0) > #else > #define INIT_TQUEUE(_tq, _routine, _data)=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 \ > =A0=A0=A0 do {=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0= =A0=A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->next =3D NULL;=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 = =A0=A0=A0 \ > =A0=A0=A0 =A0=A0=A0 (_tq)->sync =3D 0;=A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0= =A0=A0 \ > =A0=A0=A0 =A0=A0=A0 PREPARE_TQUEUE((_tq), (_routine), (_data));=A0=A0=A0 = \ > =A0=A0=A0 } while (0) > #endif > #endif > > #ifndef DECLARE_TASKLET > #define tasklet_struct tq_struct > #define tasklet_init(tlet, func, parm) INIT_TQUEUE(tlet, (void (*)(void *= ))(func), (void *)(parm)) > #define tasklet_schedule(tlet) queue_task(tlet, &tq_immediate); > =A0mark_bh(IMMEDIATE_BH) > static inline void tasklet_kill(struct tasklet_struct *t) > { > =A0=A0=A0 unsigned long flags; > =A0=A0=A0 struct tq_struct **pp; > > =A0=A0=A0 spin_lock_irqsave(&tqueue_lock, flags); > > =A0=A0=A0 if(t->sync) { > =A0=A0=A0 =A0=A0=A0 for(pp =3D &tq_immediate; *pp; pp =3D &(*pp)->next) { > =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 if(*pp =3D=3D t) { > =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 *pp =3D t->next; > =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 t->sync =3D 0; > =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 break; > =A0=A0=A0 =A0=A0=A0 =A0=A0=A0 } > =A0=A0=A0 =A0=A0=A0 } > =A0=A0=A0 } > > =A0=A0=A0 spin_unlock_irqrestore(&tqueue_lock, > =A0flags); > } > #endif > > #if defined(EXPORT_SYMTAB) > > #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) && defined(memcpy) > /* accomodate references to memcpy caused by gcc */ > void * memcpy_for_gcc(void *dest, const void *src, __kernel_size_t n) > { > =A0=A0=A0 return memcpy(dest, src, n); > } > #undef memcpy > void * memcpy(void *dest, const void *src, __kernel_size_t n) __attribute= __ ((weak, alias ("memcpy_for_gcc"))); > #endif > #endif // EXPORT_SYMTAB > > static inline void OsModuleUseCountInc(void) > { > #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) > =A0=A0=A0 MOD_INC_USE_COUNT; > #else > =A0=A0=A0 (void)try_module_get(THIS_MODULE); > #endif > } > > static inline void OsModuleUseCountDec(void) > { > #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) > =A0=A0=A0 MOD_DEC_USE_COUNT; > #else > =A0=A0=A0 module_put(THIS_MODULE); > #endif > } > > #if > =A0defined(DEBUG_CHECK_STACK) && (defined(EXPORT_SYMTAB) || defined(CNXTS= ERIAL_INCLUDE_CORE)) > > /* inspired by Benjamin LaHaise's CONFIG_X86_STACK_CHECK patch */ > > static void __attribute__ ((unused, used)) > _OSUNIQDEF(stack_overflow)(void *esp, void *eip) > { > =A0=A0=A0 printk(KERN_ERR "%s: from %p.=A0 esp: %p\n", __FUNCTION__, eip,= esp); > =A0=A0=A0 KDB_ENTER(); > } > > void mcount(void) __attribute__ ((alias (_OSUNIQDEF_STR(mcount)))); > > static int __attribute__ ((unused)) stack_danger_zone =3D > =A0=A0=A0 =A0=A0=A0 sizeof(struct task_struct) + 512; > > asm( > "\n" > "THREAD_SIZE=A0=A0=A0=A0=A0=A0 =3D 8192\n" /* 2 * PAGE_SIZE */ > "\n" > ".data\n" > "\n" > "stack_overflowed:\n" > "=A0=A0=A0 .long=A0=A0 0\n" > "\n" > ".text\n" > "\n" > "=A0=A0=A0 .align 16\n" > "\n" > "=A0=A0=A0 .type > =A0"_OSUNIQDEF_STR(mcount)",@function\n" > "=A0=A0=A0 .globl "_OSUNIQDEF_STR(mcount)"\n" > "\n" > _OSUNIQDEF_STR(mcount)":\n" > "=A0=A0=A0 push %eax\n" > "=A0=A0=A0 movl $(THREAD_SIZE - 1),%eax\n" > "=A0=A0=A0 andl %esp,%eax\n" > "=A0=A0=A0 cmpl stack_danger_zone, %eax\n" > "=A0=A0=A0 jle 1f\n" > "2:\n" > "=A0=A0=A0 popl %eax\n" > "=A0=A0=A0 ret\n" > "\n" > "1:\n" > "=A0=A0=A0 movl=A0=A0=A0 %esp,%eax\n" > "\n" > "=A0=A0=A0 lock; btsl $0,stack_overflowed\n" /* prevent re-entry */ > "=A0=A0=A0 jc 2b\n" > "\n" > "=A0=A0=A0 pushf\n" > "=A0=A0=A0 cli\n" > "\n" > =A0=A0=A0 /* push eip then esp of error for stack_overflow */ > "=A0=A0=A0 pushl=A0=A0=A0 4(%eax)\n" > "=A0=A0=A0 pushl=A0=A0=A0 %eax\n" > "=A0=A0=A0 call > =A0"_OSUNIQDEF_STR(stack_overflow)"\n" > "=A0=A0=A0 addl=A0=A0=A0 $8,%esp\n" > "\n" > "=A0=A0=A0 popf\n" > "\n" > "=A0=A0=A0 popl=A0=A0=A0 %eax\n" > "=A0=A0=A0 movl=A0=A0=A0 $0,stack_overflowed\n" > "=A0=A0=A0 ret\n" > ); > > #warning stack check enabled > > #endif > > #ifndef irqs_disabled > #define irqs_disabled() \ > ({ \ > =A0=A0=A0=A0 unsigned long flags;\ > =A0=A0=A0 __asm__ __volatile__("pushfl ; popl %0":"=3Dg" (flags): /* no i= nput */); \ > =A0=A0=A0 !(flags & (1<<9)); \ > }) > #endif > > static inline int OsContextAllowsSleeping(void) > { > =A0=A0=A0 if(irqs_disabled()) > =A0=A0=A0=A0=A0=A0=A0 return 0; > > =A0=A0=A0 if(in_irq()) > =A0=A0=A0=A0=A0=A0=A0 return > =A00; > > =A0=A0=A0 if((in_interrupt()) > #ifdef in_atomic > =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 || (in_atomic()) > #endif > =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 || (in_softirq()) > =A0=A0=A0=A0=A0 ) > =A0=A0=A0=A0=A0=A0=A0 return 0; > > =A0=A0=A0 return 1; > } > > #if defined(CONFIG_ALL_PPC) && !defined(CONFIG_PPC_PMAC) && (LINUX_VERSIO= N_CODE < KERNEL_VERSION(2,6,0)) > #define CONFIG_PPC_PMAC > #endif > > #ifdef __cplusplus > } > #endif > > #ifdef FOUND_DEV_NAME > #define PCI_SLOT_NAME(x)=A0 dev_name(&(x)->dev) > #else > #ifdef FOUND_PCI_DEV_SLOT_NAME > #define PCI_SLOT_NAME(x)=A0 (x)->slot_name > #else > #define PCI_SLOT_NAME(x) > =A0(x)->dev.bus_id > #endif > #endif > > #ifdef FOUND_CLASS_SIMPLE > #define CLASS_DEVICE_CREATE(class, dev, device, fmt, rest...) class_simpl= e_device_add(class, dev, device, fmt, ## rest) > #define CLASS_DESTROY(class) class_simple_destroy(class) > #define CLASS_DEVICE_DESTROY(class, dev) class_simple_device_remove(dev) > #define CLASS_CREATE(owner, name) class_simple_create(owner, name) > #else > #ifdef FOUND_CLASS_DEVICE > #ifdef FOUND_CLASS_DEVICE_PARENT > #define CLASS_DEVICE_CREATE(class, dev, device, fmt, rest...) class_devic= e_create(class, NULL, dev, device, fmt, ## rest) > #else > #define CLASS_DEVICE_CREATE(class, dev, device, fmt, rest...) class_devic= e_create(class, dev, device, fmt, ## rest) > #endif > #define CLASS_DEVICE_DESTROY(class, dev) class_device_destroy(class, dev) > #else > #ifdef FOUND_DEVICE_CREATE_DRVDATA > #define CLASS_DEVICE_CREATE(class, dev, device, fmt, rest...) device_crea= te_drvdata(class, device, > =A0dev, NULL, fmt, ## rest) > #else > #ifdef FOUND_DEVICE_CREATE_WITH_DRVDATA > #define CLASS_DEVICE_CREATE(class, dev, device, fmt, rest...) device_crea= te(class, device, dev, NULL, fmt, ## rest) > #else > #define CLASS_DEVICE_CREATE(class, dev, device, fmt, rest...) device_crea= te(class, device, dev, fmt, ## rest) > #endif > #endif > #define CLASS_DEVICE_DESTROY(class, dev) device_destroy(class, dev) > #endif > #define CLASS_DESTROY(class) class_destroy(class) > #define CLASS_CREATE(owner, name) class_create(owner, name) > #endif > > #if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12) ) > #define USB_MS_TIMEOUT(ms) ((ms / 1000) * HZ) > #else > #define USB_MS_TIMEOUT(ms) (ms) > #endif > > #ifdef FOUND_PM_MESSAGE_STRUCT > #define GET_PM_MESSAGE_EVENT(pm_message) (pm_message.event) > #else > #define GET_PM_MESSAGE_EVENT(pm_message) ((u32)(pm_message)) > #endif > > #ifndef FOUND_PCI_CHOOSE_STATE > #define pci_choose_state(pdev, > =A0state) (state) > #endif > > #if !defined(FOUND_PM_MESSAGE_T) && !defined(FOUND_PM_MESSAGE_STRUCT) > typedef u32 pm_message_t; > #endif > > #ifdef FOUND_PCI_REGISTER_DRIVER > #define PCI_REGISTER_DRIVER(pci_driver) pci_register_driver(pci_driver) > #else > #define PCI_REGISTER_DRIVER(pci_driver) pci_module_init(pci_driver) > #endif > > #ifdef FOUND_TOUCH_ATIME > #define TOUCH_ATIME(file) touch_atime((file)->f_vfsmnt,(file)->f_dentry); > #else > #define TOUCH_ATIME(file) update_atime((file)->f_dentry->d_inode); > #endif > > #ifdef FOUND_PCI_GET_DEVICE > #define PCI_GET_DEVICE pci_get_device > #else > #define PCI_GET_DEVICE pci_find_device > #endif > > #ifndef __user > #define __user > #endif > > #ifdef IRQF_SHARED > #define CNXT_IRQ_SHARED IRQF_SHARED > #else > #define CNXT_IRQ_SHARED SA_SHIRQ > #endif > > #ifndef proc_root_driver > #define proc_root_driver NULL > #define PROC_PREFIX > =A0"driver/" > #else > #define PROC_PREFIX "" > #endif > > #ifndef FOUND_KILL_PROC > static inline struct pid *find_pid(int nr) > { > =A0=A0=A0 return find_pid_ns(nr, &init_pid_ns); > } > > static inline int > kill_proc(pid_t pid, int sig, int priv) > { > =A0=A0=A0 int ret; > > =A0=A0=A0 rcu_read_lock(); > =A0=A0=A0 ret =3D kill_pid(find_pid(pid), sig, priv); > =A0=A0=A0 rcu_read_unlock(); > =A0=A0=A0 return ret; > } > #endif > > #ifdef FOUND_STRUCT_TTY_PORT > #define UART_INFO_TO_TTY(ui) (ui->port.tty) > #else > #define UART_INFO_TO_TTY(ui) (ui->tty) > #endif > > #ifdef FOUND_NO_STRUCT_UART_INFO > typedef struct uart_state uart_info_t; > #else > typedef struct uart_info uart_info_t; > #endif > > #endif /* __OSCOMPAT_H */ > > ------------ -------------- -------------- ----------- > > buildlog.txt > > driver version 7.80.02.06full > (cd > > =A0/lib/modules/3.0.0-14-generic/build && make > "CNXT_KERNELSRC=3D/lib/modules/3.0.0-14-generic/build" > "M=3D/usr/lib/hsfmodem/modules" "CC=3Dgcc" clean) > make[1]: Entering directory `/usr/src/linux-headers-3.0.0-14-generic' > make[1]: Leaving directory `/usr/src/linux-headers-3.0.0-14-generic' > (cd > =A0/lib/modules/3.0.0-14-generic/build && make > "CNXT_KERNELSRC=3D/lib/modules/3.0.0-14-generic/build" > "M=3D/usr/lib/hsfmodem/modules/GPL/hda" "CC=3Dgcc" > "HDA_CFLAGS=3D-DFOUND_KZALLOC=A0 -DFOUND_TLV=A0=A0 -DFOUND_IRQ_HANDLER_T > -DFOUND_DELAYED_WORK=A0 -DFOUND_NO_CTL_ELEM_RW" clean) > make[1]: Entering directory `/usr/src/linux-headers-3.0.0-14-generic' > make[1]: Leaving directory `/usr/src/linux-headers-3.0.0-14-generic' > rm > =A0-rf *.o GPL/*.o *.ko GPL/*.ko *.mod.c GPL/*.mod.c .*.cmd GPL/.*.cmd > .tmp_versions .tmp_versions > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfosspec.mod > =A0/lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfserial.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfengine.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfpcibasic2.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfpcibasic3.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfhda.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfmc97ich.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfmc97via.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfmc97ali.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfmc97ati.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfmc97sis.mod > /lib/modules/3.0.0-14-generic/build/.tmp_versions/hsfsoar.mod > Modules.symvers GPL/hda/Modules.symvers Module.symvers > GPL/hda/Module.symvers modules.order GPL/hda/modules.order > Module.markers GPL/hda/Module.markers > (cd /lib/modules/3.0.0-14-generic/build > =A0&& make "CNXT_KERNELSRC=3D/lib/modules/3.0.0-14-generic/build" "M=3D/u= sr/lib/hsfmodem/modules" "CC=3Dgcc" modules) > make[1]: Entering directory `/usr/src/linux-headers-3.0.0-14-generic' > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_engine.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_hda.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_mc97ali.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_mc97ati.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_mc97ich.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_mc97sis.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_mc97via.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/mod_osspec.o > =A0 CC [M]=A0 /usr/lib/hsfmodem/modules/osservices.o > In file included from /usr/lib/hsfmodem/modules/osservices.c:20:0: > /usr/lib/hsfmodem/modules/GPL/oscompat.h:201:57: error: 'SPIN_LOCK_UNLOCK= ED' undeclared here (not in a > =A0function) > /usr/lib/hsfmodem/modules/osservices.c:51:28: fatal error: linux/smp_lock= .h: No such file or directory > compilation terminated. > make[2]: *** [/usr/lib/hsfmodem/modules/osservices.o] Error 1 > make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 > make[1]: Leaving directory `/usr/src/linux-headers-3.0.0-14-generic' > make: *** [all] Error 2