Attaching Scanmodem output

This is a multipart message in MIME format.

------=_NextPart_000_0041_01D36C78.E422FD50
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit

I realize this is old hardware on a new distro - Fedora Workstation 27.

I want to really make an honest effort at getting the old agrsm code for
this device working (I still see others have it and want what I want - FAX
capabilities on an old laptop).

I am really seeking to find out simply this:  Which source tarball do I need
from http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ to use.
Also, maybe someone else with some rudimentary programming skills such as
myself has already begun this task and will see this message and shoot me
their code-in-progress.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

------=_NextPart_000_0041_01D36C78.E422FD50
Content-Type: text/plain;
	name="ModemData.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="ModemData.txt"

 Only plain text email is forwarded by the  [email protected] List =
Server,=0A=
 as HTML can contain viruses. Use as the email Subject Line:=0A=
           YourName, YourCountry =0A=
Kernel  kernel 4.13.9-300.fc27.x86_64 =0A=
 With this Subject Line cogent experts will be alerted, and useful case =
names left in the Archive.=0A=
 YourCountry will enable Country specific guidance. Linux experts in =
YourCountry =0A=
 can be found through: http://www.linux.org/groups/index.html.=0A=
They will know your Country's modem code, which may be essential for =
dialup service.=0A=
Responses from [email protected] are sometimes blocked by an =
Internet Provider mail filters.=0A=
 So in a day, also check the Archived responses at =
http://www.linmodems.org =0A=
--------------------------  System information =
----------------------------=0A=
CPU=3Dx86_64,  \S=0A=
Kernel ,  ALSA_version=3Dk4.13.=0A=
Linux version 4.13.9-300.fc27.x86_64 =
([email protected]) (gcc version 7.2.1 20170915 =
(Red Hat 7.2.1-2) (GCC)) #1 SMP Mon Oct 23 13:41:58 UTC 2017=0A=
 scanModem update of:  2011_08_08=0A=
=0A=
/etc/lsb-release not found=0A=
=0A=
=0A=
Presently install your Linux Distributions dkms package. It provides for =
automated driver updates,=0A=
following upgrade of your kernel.  For details see =
http://linux.dell.com/projects.shtml#dkms=0A=
=0A=
=0A=
Some modem drivers can only be used in 32 bit modem on x86_64 systems,=0A=
while some others are competent on x86_64 Systems.  Cases are:=0A=
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html =0A=
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem =
controllers.=0A=
In both cases, 32 bit libraries must be installed to support the =
slmodemd helper having a precompiled 32 bit component.=0A=
2) For USB modems using the slusb.ko driver. 32 bit libraries must be =
installed to support the slmodemd helper having a precompiled 32 bit =
component=0A=
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are =
x86_64 competent.=0A=
4) agrsm packages for LSI/AgereSystems softmodems are not competent on =
x86_64 systems.=0A=
=0A=
 There are no blacklisted modem drivers in /etc/modprobe*  files =0A=
=0A=
 Potentially useful modem drivers now loaded are:=0A=
       snd_hda_intel           =0A=
=0A=
Attached USB devices are:=0A=
 ID 04f2:b008 Chicony Electronics Co., Ltd USB 2.0 Camera=0A=
 ID 046d:c70a Logitech, Inc. MX5000 Cordless Desktop=0A=
 ID 046d:c70e Logitech, Inc. MX1000 Bluetooth Laser Mouse=0A=
 ID 046d:c709 Logitech, Inc. BT Mini-Receiver (HCI mode)=0A=
 ID 046d:0b02 Logitech, Inc. C-UV35 [Bluetooth Mini-Receiver] (HID proxy =
mode)=0A=
If a cellphone is not detected, see =
http://ubuntuforums.org/archive/index.php/t-878554.html=0A=
A sample report is:  =
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html=0A=
=0A=
If a USB modem or cellphone is attached and was not detected, please=0A=
provide available information in your request to [email protected]=0A=
=0A=
Candidate PCI devices with modem chips are:=0A=
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition =
Audio Controller (rev 02)=0A=
High Definition Audio cards can host modem chips.=0A=
=0A=
For candidate card in slot 00:1b.0, firmware information and bootup =
diagnostics are:=0A=
 PCI slot	PCI ID		SubsystemID	Name=0A=
 ----------	---------	---------	--------------=0A=
 00:1b.0	8086:27d8	1179:ff03	Audio device: Intel Corporation NM10/ICH7 =
Family High Definition Audio Controller =0A=
=0A=
 Modem interrupt assignment and sharing: =0A=
 28:       1153          0   PCI-MSI 442368-edge      snd_hda_intel:card0=0A=
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----=0A=
[    0.189086] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300=0A=
[    0.189115] pci 0000:00:1b.0: reg 0x10: [mem 0xdc440000-0xdc443fff =
64bit]=0A=
[    0.189222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold=0A=
[   22.094540] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT =
A -> IRQ 22=0A=
[   22.426998] input: HDA Intel Mic as =
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12=0A=
[   22.427153] input: HDA Intel Front Headphone as =
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13=0A=
=0A=
=0A=
=3D=3D=3D=3D=3D Advanced Linux Sound Architecture (ALSA) diagnostics =
=3D=3D=3D=3D=3D =0A=
The ALSA packages provide audio support and also drivers for some modems.=0A=
ALSA diagnostics are written during bootup to /proc/asound/ folders.=0A=
=0A=
The modem cards detected by "aplay -l"  are: None=0A=
=0A=
=0A=
The /proc/asound/pcm file reports:=0A=
-----------------------=0A=
00-00: ALC861-VD Analog : ALC861-VD Analog : playback 1 : capture 1=0A=
=0A=
about /proc/asound/cards:=0A=
------------------------=0A=
 0 [Intel          ]: HDA-Intel - HDA Intel=0A=
                      HDA Intel at 0xdc440000 irq 28=0A=
=0A=
 PCI slot 00:1b.0 has a High Definition Audio Card=0A=
 The drivers are in the kernel modules tree at:=0A=
 =0A=
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1=0A=
--------------------------------------------------------=0A=
Codec: LSI Generic HDMI=0A=
Address: 1=0A=
MFG Function Id: 0x2 (unsol 1)=0A=
Vendor Id: 0x11c11040=0A=
Subsystem Id: 0x11790001=0A=
Revision Id: 0x100200=0A=
Modem Function Group: 0x1=0A=
=0A=
 The audio card hosts a softmodem chip:  0x11c11040=0A=
=0A=
The softmodem chip 11c11040 is hosted on the Subsytem of the High =
Definition Audio card,=0A=
and is supported by the AgereSystems/LSI driver pair agrmodem + =
agrserial, which is provided by =0A=
the most current package agrsm-11c11040-version at =
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ =0A=
=0A=
If not a Conexant modem, the driver agrsm with its dependent drivers:=0A=
=0A=
----------=0A=
provide audio + modem support with the modem chip residing on the =
subsystem.=0A=
Any particular card can host any one of several soft modem chips. =0A=
=0A=
=3D=3D=3D Finished firmware and bootup diagnostics, next deducing cogent =
software. =3D=3D=3D=0A=
=0A=
Predictive  diagnostics for card in bus 00:1b.0:=0A=
	Modem chipset  detected on=0A=
NAME=3D"Audio device: Intel Corporation NM10/ICH7 Family High Definition =
Audio Controller "=0A=
CLASS=3D0403=0A=
PCIDEV=3D8086:27d8=0A=
SUBSYS=3D1179:ff03=0A=
IRQ=3D28=0A=
HDA2=3D00:1b.0=0A=
SOFT=3D8086:27d8.HDA=0A=
HDAchipVendorID=3D11c1=0A=
CHIP=3D0x11c11040=0A=
IDENT=3Dagrsm=0A=
Driver=3Dagrsm=0A=
package=3Dagrsm-11c11040=0A=
=0A=
 For candidate modem in:  00:1b.0=0A=
   0403 Audio device: Intel Corporation NM10/ICH7 Family High Definition =
Audio Controller =0A=
      Primary device ID:  8086:27d8=0A=
    Subsystem PCI_id  1179:ff03 =0A=
    Softmodem codec or chipset from diagnostics: 0x11c11040=0A=
                               from    Archives: =0A=
                        The HDA card softmodem chip is 0x11c11040=0A=
      =0A=
=0A=
Support type needed or chipset:	agrsm=0A=
=0A=
=0A=
Writing DOCs/Intel.txt=0A=
=0A=
      =0A=
 There is no agrsm software support for x86_64 systems, through the =
modem may be =0A=
 supported on Intel/i386 installations, which do more slowly servce =
x86_64 processors.=0A=
 =0A=
=0A=
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + =
agrserial driver pair.=0A=
There are a few different chipsets which use this driver pair, but they =
use different code resources:=0A=
Chipsets			KV*	PackageNames (most current as of November 2009)=0A=
-------------------------------------------------------------------------=
---------------------=0A=
11c1:048c and 11c1:048f         2.6.29	=
agrsm048pci-2.1.60_20100108_i386.deb or =
agrsm048pci-2.1.60_20100108.tar.gz=0A=
11c1:0620                       2.6.31  =
agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz =
!!=0A=
11c11040 (on HDA audio cards)   2.6.31  agrsm-11c11040_20091225_i386.deb =
or agrsm-11c11040-2.1.80~20091225.tar.bz2  !!=0A=
   All available at: =
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/   =0A=
Additionally there are;=0A=
automation & testing                    agrsm-tools_0.0.1_all.deb or =
agrsm-tools-0.0.1-2.noarch.rpm=0A=
General background                      agrsm_howto.txt =0A=
-------------------------------------------------------------------------=
-----------------------=0A=
* KV =3D=3D latest kernel release with a reported success =0A=
!! Latest update with major credit to  Nikolay Zhuravlev=0A=
   But see conflict issue: =
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html =0A=
   For the 11c11040 chip with kernels 2.6.31 and later a change in a =
modules loading settingmay be necessary.=0A=
   Within the file /etc/modprobe.d/alsa-base.conf  (or equivalent for =
your Distro), change the phrase:=0A=
      options snd-hda-intel power_save=3D10=0A=
   to:=0A=
      options snd-hda-intel power_save=3D0=0A=
   or the agrsm drivers will not function. For Ubuntu related systems =
this can be done with:=0A=
   $ sudo gedit /etc/modprobe.d/alsa-base.conf=0A=
=0A=
Report from  Bjorn Wielens:=0A=
Please note- trying to load the modules on a OpenSuSE 11.2 system gives=0A=
 an error about the module_version symbol. Using:=0A=
# modprobe --force agrmodem=0A=
# modprobe --force agrserial =0A=
is necessary to load the drivers, and does not appear to cause ill =
effects.=0A=
=0A=
=0A=
All of the above packages are dkms competent.  This means that if your =
Linux distros dkms package=0A=
is previously installed, if provides for future updates matching =
forthcoming kernels.=0A=
=0A=
-------------- end Agere Systems section -------------------=0A=
=0A=
 Completed candidate modem analyses.=0A=
=0A=
 A UDEV device file system is not active.=0A=
=0A=
 The kernel was compiled with gcc version 7.2.1 and a compiler is not =
installed=0A=
=0A=
 linux-headers-4.13.9-300.fc27.x86_64 resources needed for compiling are =
not manifestly ready!=0A=
 The code linking utility, ld, may be needed and is provided in the =
binutils package =0A=
 The patch utility is needed for compiling ALSA drivers, and possibly =
others. =0A=
=0A=
 If compiling is necessary packages must be installed, providing:=0A=
	gcc-7.2  kernel-source-4.13.9-300.fc27.x86_64=0A=
=0A=
=0A=
If a driver compilation fails, with message including some lack of some =
FileName.h (stdio.h for example), then=0A=
Some additional kernel-header files need installation to /usr/include. =
The minimal additional packages are libc6-dev=0A=
and any of its dependents, under Ubuntu linux-libc-dev=0A=
=0A=
If an alternate ethernet connection is available,=0A=
$  apt-get update=0A=
$  apt-get -s install linux-kernel-devel=0A=
will install needed packages.=0A=
For Debian/Ubuntu related distributions, run the following command to =
display the needed package list:=0A=
=0A=
Otherwise packages have to be found through http://packages.ubuntu.com=0A=
Once downloaded and transferred into a Linux partition,=0A=
they can be installed alltogether with:=0A=
$ sudo dpkg -i *.deb=0A=
=0A=
=0A=
Checking pppd properties:=0A=
	-rwxr-xr-x. 1 root root 392864 Aug  4 06:35 /usr/sbin/pppd=0A=
=0A=
In case of an "error 17" "serial loopback" problem, see:=0A=
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html=0A=
=0A=
To enable dialout without Root permission do:=0A=
	$ su - root  (not for Ubuntu)=0A=
         chmod a+x /usr/sbin/pppd=0A=
or under Ubuntu related Linuxes=0A=
	 chmod a+x /usr/sbin/pppd=0A=
=0A=
Checking settings of:	/etc/ppp/options=0A=
lock=0A=
=0A=
In case of a message like:=0A=
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied=0A=
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html=0A=
=0A=
For guidance on FAX usage, get from =
http://linmodems.technion.ac.il/packages/  get faxing.tar.gz=0A=
It has samples for a modem using port /dev/ttySL0, which must be changed =
to match your modem's port.=0A=
=0A=
=0A=
 Don't worry about the following, it is for experts should trouble =
shooting be necessary.=0A=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=0A=
=0A=
 Checking for modem support lines:=0A=
 --------------------------------------=0A=
     /device/modem symbolic link:   =0A=
slmodemd created symbolic link /dev/ttySL0:  =0A=
     Within /etc/udev/ files:=0A=
Binary file /etc/udev/hwdb.bin matches=0A=
     Within /etc/modprobe.conf files:=0A=
=0A=
     Within any ancient /etc/devfs files:=0A=
=0A=
     Within ancient kernel 2.4.n /etc/module.conf files:=0A=
=0A=
--------- end modem support lines --------=0A=
=0A=

------=_NextPart_000_0041_01D36C78.E422FD50--