Senao NL-2511MP PLUS , PDA update problem.

   i just subscribed to this mailing list . I am despered and need some
   help . I read everything i could find about PDA update . I have no
   problems downloading my current PDA , first i tryed to update it with
   prism2_srec from hostap debian package . It seem that it doesn`t write
   new PDA to flash ... :( . So i got linux-wlan-ng and prism2dl, here is
   what i done and no results of writing the new PDA to flash :( :
   first i installed linux-wlan-ng , loaded modules i could see my card
   with iwconfig , put it in fwload mode (wlanctl-ng wlan0 lnxreq_ifstate
   ifstate=disable ; wlanctl-ng wlan0 lnxreq_ifstate ifstate=fwload ) ,
   downloaded PDA file with (prism2dl -g wlan0 > pda ), edited the PDA
   for tha area where i am liveing . But when i try to write it to flash
   along with secondary firmware from
   http://linux.junsun.net/intersil-prism/firmware with that command (
   prism2dl -v -p pda.new -l 0x007f0000 -f sf010704.hex wlan0 ) it says
   at the end of many lines like that "S3 datarec, line=3700
   addr=0x007f1760 len=016 "
   "prism2dl: Incompatible firmware image."
   I already managed to update the firmware of the card with that same
   sf010704.hex with prism2_srec .
   Here are the last line from the output :
   MFI ID: 0 v0 0->0
   CFI ID: 0 v0 0->0

- Ignored:
   PRI ID: 0x3 v1 4->5
   Version:  ID 0x1f 1.7.4
   Compat: Role 0 Id 0x4 v4 1->12
   Compat: Role 0x1 Id 0x1 v1 1->1
   Compat: Role 0x1 Id 0x2 v2 1->1
   Compat: Role 0x1 Id 0x3 v1 4->4
   Seq: 0
   Platform:  ID 0x800a 1.0.0
   Platform:  ID 0x800b 1.0.0
   Platform:  ID 0x800c 1.0.0
   Platform:  ID 0x800d 1.0.0
   Platform:  ID 0x8012 1.0.0
   Platform:  ID 0x8013 1.0.0
   Platform:  ID 0x8014 1.0.0
   Platform:  ID 0x8016 1.0.0
   Platform:  ID 0x8017 1.0.0
   Platform:  ID 0x8018 1.0.0
   Platform:  ID 0x801a 1.0.0
   Platform:  ID 0x801b 1.0.0
   Platform:  ID 0x801c 1.0.0
   Platform:  ID 0x8021 1.0.0
   Platform:  ID 0x8022 1.0.0
   Platform:  ID 0x8023 1.0.0
   prism2dl: Incompatible firmware image.

   Thank you .