Re: MA111 problem at boot on Fedora FC3

"Peter Ison" <[email protected]>
Newsgroups gmane.linux.linux-wlan.user
Message-ID <003301c56c8f$bf97ffe0$0200a8c0@station1xp> 
Dave,

I uncommented the debug lines in hotplug.functions, usb.agent and wlan.agent 
and rebooted. I attach the log for the relevant hotplug, usb.agent, 
wlan.agent, Prism2 events. I sorted the file because I noticed that the 
kernel events were out of sequence in /var/log/messages.

All activity seems to be initiated through hotplug (or coldplug as part of 
the boot process). However, in reply to your question, there are no 
significant events after the linkstatus DISCONNECTED/CONNECTED sequence.

Hope this helps.

Peter

----- Original Message ----- 
From: "Dave Jenkins" <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 08, 2005 12:35 PM
Subject: Re: [lwlan-user] MA111 problem at boot on Fedora FC3


> Peter,
>
> Thanks for posting the /etc/wlan/shared patch. So far this has been
> successful in allowing me to recover from network lockups that
> previously required unplugging the adaptor.
>
> I'm using a D-Link DWL-122 on Fedora Core 3; this adaptor seems to
> misbehave differently from the MA111. My problem was solved by either a
> long (20 second) sleep in wlan.agent, or hotplug-blacklisting
> prism2_usb and modprobing it late in the boot process. I tried going
> back to hotplug with your patch in place, but this restored the lockup.
>
> Is your adaptor being started by hotplug? With DEBUG=yes set in
> /etc/hotplug/hotplug.functions, do you see any activity from usb.agent
> in the logs, _after_ linkstatus=CONNECTED?
>
> Anyway, glad it's all working, though it's a shame in a way that there
> isn't a single neat solution that works for everyone!
>
> Cheers,
>
> Dave
>
>
>
> ___________________________________________________________
> How much free photo storage do you get? Store your holiday
> snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
> _______________________________________________
> Linux-wlan-user mailing list
> [email protected]
> http://lists.linux-wlan.com/mailman/listinfo/linux-wlan-user
>

_______________________________________________
Linux-wlan-user mailing list
[email protected]
http://lists.linux-wlan.com/mailman/listinfo/linux-wlan-user
wlanboot.txt (text/plain, 8.9 KB) 
Jun  8 23:50:35 myntech wlan.agent[1749]: WLAN startup on null (null) 
Jun  8 23:50:36 myntech default.hotplug[1758]: arguments (module) env (SUBSYSTEM=module OLDPWD=/ DEVPATH=/module/prism2_usb PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEBUG=yes SEQNUM=468 _=/bin/env) 
Jun  8 23:50:36 myntech default.hotplug[1765]: arguments (drivers) env (SUBSYSTEM=drivers OLDPWD=/ DEVPATH=/bus/usb/drivers/prism2_usb PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEBUG=yes SEQNUM=469 _=/bin/env) 
Jun  8 23:50:36 myntech wlan.agent[1749]: WLAN p80211 starting! 
Jun  8 23:50:36 myntech wland[1787]: wland daemon init successful <14>Jun  8 23:50:36 wland[1787]: netlink socket opened and bound successfully
Jun  8 23:50:39 myntech default.hotplug[2421]: arguments (usb_host) env (PHYSDEVPATH=/devices/pci0000:00/0000:00:07.2 SUBSYSTEM=usb_host OLDPWD=/ DEVPATH=/class/usb_host/usb1 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 PHYSDEVDRIVER=uhci_hcd DEBUG=yes PHYSDEVBUS=pci SEQNUM=518 _=/bin/env) 
Jun  8 23:50:39 myntech default.hotplug[2421]: no runnable /etc/hotplug/usb_host.agent is installed Wed Jun  8 23:50:39 BST 2005 
Jun  8 23:50:39 myntech default.hotplug[2432]: arguments (usb) env (SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:07.2/usb1 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 PHYSDEVDRIVER=usb DEBUG=yes PHYSDEVBUS=usb SEQNUM=519 _=/bin/env) 
Jun  8 23:50:39 myntech default.hotplug[2432]: invoke /etc/hotplug/usb.agent () 
Jun  8 23:50:39 myntech default.hotplug[2440]: arguments (usb) env (SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEVICE=/proc/bus/usb/001/001 PRODUCT=0/0/206 TYPE=9/0/0 DEBUG=yes PHYSDEVBUS=usb SEQNUM=520 _=/bin/env) 
Jun  8 23:50:39 myntech default.hotplug[2440]: invoke /etc/hotplug/usb.agent () 
Jun  8 23:50:39 myntech default.hotplug[2465]: arguments (usb_host) env (PHYSDEVPATH=/devices/pci0000:00/0000:00:07.3 SUBSYSTEM=usb_host OLDPWD=/ DEVPATH=/class/usb_host/usb2 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 PHYSDEVDRIVER=uhci_hcd DEBUG=yes PHYSDEVBUS=pci SEQNUM=521 _=/bin/env) 
Jun  8 23:50:39 myntech default.hotplug[2465]: no runnable /etc/hotplug/usb_host.agent is installed Wed Jun  8 23:50:39 BST 2005 
Jun  8 23:50:39 myntech default.hotplug[2476]: arguments (usb) env (SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:07.3/usb2 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 PHYSDEVDRIVER=usb DEBUG=yes PHYSDEVBUS=usb SEQNUM=522 _=/bin/env) 
Jun  8 23:50:39 myntech default.hotplug[2476]: invoke /etc/hotplug/usb.agent () 
Jun  8 23:50:39 myntech default.hotplug[2486]: arguments (usb) env (SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEVICE=/proc/bus/usb/002/001 PRODUCT=0/0/206 TYPE=9/0/0 DEBUG=yes PHYSDEVBUS=usb SEQNUM=523 _=/bin/env) 
Jun  8 23:50:39 myntech default.hotplug[2486]: invoke /etc/hotplug/usb.agent () 
Jun  8 23:50:39 myntech usb.agent[2440]: Setup 0x00 0x00 for USB product 0/0/206 
Jun  8 23:50:40 myntech default.hotplug[2565]: arguments (usb) env (SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1:1.0 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEVICE=/proc/bus/usb/002/002 INTERFACE=255/255/255 PRODUCT=846/4110/132 TYPE=0/0/0 DEBUG=yes PHYSDEVBUS=usb SEQNUM=526 _=/bin/env) 
Jun  8 23:50:40 myntech default.hotplug[2565]: invoke /etc/hotplug/usb.agent () 
Jun  8 23:50:40 myntech default.hotplug[2567]: arguments (net) env (PHYSDEVPATH=/devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1:1.0 SUBSYSTEM=net OLDPWD=/ DEVPATH=/class/net/wlan0 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 PHYSDEVDRIVER=prism2_usb INTERFACE=wlan0 DEBUG=yes PHYSDEVBUS=usb SEQNUM=527 _=/bin/env) 
Jun  8 23:50:40 myntech wlan.agent[2546]: WLAN register on wlan0 (prism2_usb) 
Jun  8 23:50:40 myntech wlan.agent[2546]: WLAN wlan0 registered. 
Jun  8 23:50:41 myntech usb.agent[2565]: Setup prism2_usb for USB product 846/4110/132 
Jun  8 23:50:42 myntech default.hotplug[2557]: arguments (usb) env (SUBSYSTEM=usb OLDPWD=/ DEVPATH=/devices/pci0000:00/0000:00:07.3/usb2/2-1 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 PHYSDEVDRIVER=usb DEBUG=yes PHYSDEVBUS=usb SEQNUM=525 _=/bin/env) 
Jun  8 23:50:42 myntech default.hotplug[2557]: invoke /etc/hotplug/usb.agent () 
Jun  8 23:50:42 myntech usb.agent[2486]: Setup 0x00 0x00 for USB product 0/0/206 
Jun  8 23:50:42 myntech usb.agent[2565]: Setup 0x00 0x00 for USB product 846/4110/132 
Jun  8 23:50:44 myntech wlan.agent[2546]: WLAN bringing up layer 3+ with /sbin/ifup 
Jun  8 23:50:44 myntech wlan.agent[2546]: WLAN wlan0 brought up successfully. 
Jun  8 23:51:08 myntech ifup:     SET failed on device wlan0 ; Function not implemented. 
Jun  8 23:51:08 myntech ifup:     SET failed on device wlan0 ; Operation not supported. 
Jun  8 23:51:08 myntech ifup:     SET failed on device wlan0 ; Operation not supported. 
Jun  8 23:51:08 myntech ifup:     SET failed on device wlan0 ; Operation not supported. 
Jun  8 23:51:08 myntech ifup:     SET failed on device wlan0 ; Operation not supported. 
Jun  8 23:51:11 myntech network: Bringing up interface wlan0:  succeeded 
Jun  8 23:51:17 myntech kernel: usbcore: registered new driver hub
Jun  8 23:51:17 myntech kernel: usbcore: registered new driver usbfs
Jun  8 23:51:30 myntech kernel: usbcore: registered new driver hiddev
Jun  8 23:51:31 myntech kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Jun  8 23:51:31 myntech kernel: usbcore: registered new driver usbhid
Jun  8 23:51:34 myntech kernel: SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 
Jun  8 23:51:38 myntech ntpd[4888]: Listening on interface wlan0, 192.168.0.1#123
Jun  8 23:51:41 myntech kernel: SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Jun  8 23:51:42 myntech kernel: prism2usb_init: dev_info is: prism2_usb
Jun  8 23:51:42 myntech kernel: prism2usb_init: prism2_usb.o: 0.2.1-pre26 Loaded
Jun  8 23:51:43 myntech kernel: usbcore: registered new driver prism2_usb
Jun  8 23:51:46 myntech kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Jun  8 23:51:46 myntech kernel: USB Universal Host Controller Interface driver v2.2
Jun  8 23:51:47 myntech kernel: hub 1-0:1.0: USB hub found
Jun  8 23:51:47 myntech kernel: hub 2-0:1.0: USB hub found
Jun  8 23:51:47 myntech kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Jun  8 23:51:49 myntech kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
Jun  8 23:51:49 myntech kernel: Writing 4096 bytes to ram @0x7e2ffe
Jun  8 23:51:49 myntech kernel: Writing 4096 bytes to ram @0x7e3ffe
Jun  8 23:51:49 myntech kernel: Writing 4096 bytes to ram @0x7e4ffe
Jun  8 23:51:49 myntech kernel: Writing 4096 bytes to ram @0x7e5ffe
Jun  8 23:51:50 myntech kernel: Writing 4096 bytes to ram @0x7e6ffe
Jun  8 23:51:50 myntech kernel: Writing 4096 bytes to ram @0x7e7ffe
Jun  8 23:51:50 myntech kernel: Writing 4096 bytes to ram @0x7e8ffe
Jun  8 23:51:50 myntech kernel: Writing 4096 bytes to ram @0x7e9ffe
Jun  8 23:51:50 myntech kernel: Writing 4096 bytes to ram @0x7eaffe
Jun  8 23:51:50 myntech kernel: Writing 4096 bytes to ram @0x7ebffe
Jun  8 23:51:51 myntech kernel: Writing 3010 bytes to ram @0x7eeffe
Jun  8 23:51:51 myntech kernel: Writing 4096 bytes to ram @0x7ecffe
Jun  8 23:51:51 myntech kernel: Writing 4096 bytes to ram @0x7edffe
Jun  8 23:51:51 myntech kernel: Writing 416 bytes to ram @0x7efc20
Jun  8 23:51:52 myntech kernel: Writing 16 bytes to ram @0x7efdd0
Jun  8 23:51:52 myntech kernel: Writing 3288 bytes to ram @0x7fe000
Jun  8 23:51:52 myntech kernel: Writing 4044 bytes to ram @0x7f0800
Jun  8 23:51:53 myntech kernel: ident: nic h/w: id=0x8026 1.0.0
Jun  8 23:51:53 myntech kernel: ident: pri f/w: id=0x15 1.1.3
Jun  8 23:51:53 myntech kernel: ident: sta f/w: id=0x1f 1.8.3
Jun  8 23:51:54 myntech kernel: CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
Jun  8 23:51:54 myntech kernel: MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
Jun  8 23:51:54 myntech kernel: PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4
Jun  8 23:51:55 myntech kernel: PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
Jun  8 23:51:55 myntech kernel: STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/15
Jun  8 23:51:56 myntech kernel: STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
Jun  8 23:51:56 myntech kernel: STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Jun  8 23:51:57 myntech kernel: Prism2 card SN: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
Jun  8 23:51:58 myntech kernel: ACPI: Power Button (FF) [PWRF]
Jun  8 23:51:58 myntech kernel: linkstatus=DISCONNECTED (unhandled)
Jun  8 23:51:59 myntech kernel: ACPI: Sleep Button (CM) [SLPB]
Jun  8 23:52:00 myntech kernel: linkstatus=CONNECTED
Jun  8 23:52:18 myntech haldaemon: haldaemon startup succeeded
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.