about WPC-11 on Fedora Core 4

Dear All,
Now I am trying to make my WPC-11( version1 ) can run successfully on
my FC4( kernel 2.6.11 ) machine.
But I meet much trouble now. I hope someone can help me to solve my problem.
Here I'll show my set up steps and maybe you can find where I was wrong.

At first, I downloaded linux-wlan-ng-0.2.1-pre26. Then, I unzipped it
in /usr directory. I also add "t10003c7.hex" into
/linux-wlan-ng-0.2.1-pre26/src/prism2. After that, I opened a terminal
to run "make config". Following words are my pre-configuration:
*********************************************************************************
[root@BobLinuxStation linux-wlan-ng-0.2.1-pre26]# make config

-------------- Linux WLAN Configuration Script -------------

The default responses are correct for most users.

Build Prism2.x PCMCIA Card Services (_cs) driver? (y/n) [y]: y
Build Prism2 PLX9052 based PCI (_plx) adapter driver? (y/n) [n]: n
Build Prism2.5 native PCI (_pci) driver? (y/n) [n]: n
Build Prism2.5 USB (_usb) driver? (y/n) [y]: y

Linux source directory [/lib/modules/2.6.11-1.1369_FC4/build]:

The kernel source tree is version 2.6.11-1.1369_FC4.
Kernel 2.5/2.6 support is highly experimental.
The current kernel build date is Thu Jun 2 22:55:56 2005.

Alternate target install root directory on host []:
PCMCIA script directory [/etc/pcmcia]:
  Module install directory [/lib/modules/2.6.11-1.1369_FC4]:

It looks like you have a System V init file setup.

Prefix for build host compiler? (rarely needed) []:

Build for debugging (see doc/config.debug) (y/n) [y]: y


Configuration successful.

[root@BobLinuxStation linux-wlan-ng-0.2.1-pre26]#
************************************************************************************

Because I'm using Toshiba laptop, there is no PCI or PLX on my
machine. Other options I followed default set yet.

When I did "make all", I found there were many "Warning:"s. I'm really
worry about them.

Then I read README file to try new configuration. But I found it seems
not necessary to modify /etc/pcmcia/network.opts file. I did not want
change its own IP setting or DNS setting. I just want this card can be
found by my machine and can be driven automatically.

In fact, before I install wlan-ng driver, the system's original
Orinoco pcmcia card driver and find this WPC-11 and can drive it very
well. But I need wlan-ng to work. So I delete original Orinoco's ko in
/lib/modules/2.6.11-1.1369_FC4/kernel/drivers/net/wireless.

When I insert my WPC-11 PCMCIA card into my machine, I used "lsmod" to
see if the driver is working successfully. Following is the content of
"lsmod"
***********************************************************************************
Module                  Size  Used by
prism2_cs             109336  1
p80211                 46228  1 prism2_cs
i915                   19009  1
drm                    70101  2 i915
parport_pc             28933  1
lp                     13001  0
parport                40585  2 parport_pc,lp
autofs4                29253  2
rfcomm                 42333  0
l2cap                  30661  5 rfcomm
bluetooth              56133  4 rfcomm,l2cap
sunrpc                167813  1
pcmcia                 29025  5 prism2_cs
ipt_REJECT              5569  1
ipt_state               1857  5
ip_conntrack           41497  1 ipt_state
iptable_filter          2881  1
ip_tables              19521  3 ipt_REJECT,ipt_state,iptable_filter
dm_mod                 58101  0
video                  15941  0
button                  6609  0
battery                 9413  0
ac                      4805  0
md5                     4033  1
ipv6                  268097  8
yenta_socket           21449  3
rsrc_nonstatic         12737  1 yenta_socket
pcmcia_core            50909  4 prism2_cs,pcmcia,yenta_socket,rsrc_nonstatic
uhci_hcd               35152  0
ehci_hcd               41037  0
i2c_i801                8781  0
i2c_core               21569  1 i2c_i801
snd_intel8x0m          19589  0
snd_intel8x0           34689  1
snd_ac97_codec         75961  2 snd_intel8x0m,snd_intel8x0
snd_seq_dummy           3653  0
snd_seq_oss            37057  0
snd_seq_midi_event      9153  1 snd_seq_oss
snd_seq                62289  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          8781  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            51185  0
snd_mixer_oss          17857  2 snd_pcm_oss
snd_pcm               100169  4
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              33605  2 snd_seq,snd_pcm
snd                    57157  10
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore              10913  2 snd
snd_page_alloc          9669  3 snd_intel8x0m,snd_intel8x0,snd_pcm
8139too                30017  0
mii                     5441  1 8139too
joydev                  9601  0
ext3                  132553  1
jbd                    86233  1 ext3
*******************************************************************************

I found "p80211" and "prism2_cs" are working, but why the card cannot
be driven normally? When I open /var/log/messages to check, I found:
*******************************************************************************
Aug 16 14:56:50 localhost cardmgr[1700]: socket 0: Linksys WPC11
11Mbps 802.11b WLAN Card
Aug 16 14:56:52 localhost pam_timestamp_check: pam_timestamp: `/var/'
owner GID != 0
Aug 16 14:56:52 localhost wland[3277]: wland daemon init successful
Aug 16 14:56:52 localhost wland[3277]: netlink socket opened and bound
successfully
Aug 16 14:56:52 localhost kernel: prism2_cs: Ignoring new-style
parameters in presence of obsolete ones
Aug 16 14:56:52 localhost kernel: prism2cs_init: prism2_cs.o: 0.2.1-pre26 Loaded
Aug 16 14:56:52 localhost kernel: prism2cs_init: dev_info is: prism2_cs
Aug 16 14:56:52 localhost kernel: prism2_cs: index 0x01: Vcc 5.0, irq
3, io 0x0100-0x013f
Aug 16 14:56:52 localhost wlan.agent[3288]: WLAN Hotplug bypassed for pcmcia
Aug 16 14:56:52 localhost cardmgr[1700]: executing: './wlan-ng start wlan0 2>&1'
Aug 16 14:56:52 localhost cardmgr[1700]: + cat:
/proc/sys/kernel/hotplug: 权限不够 (Authentication is not enough)
Aug 16 14:56:52 localhost cardmgr[1700]: + /etc/wlan/shared: line 71:
[: too many arguments
Aug 16 14:56:53 localhost cardmgr[1700]: + grep:
/proc/net/p80211/wlan0/wlandev: 权限不够(Authentication is not enough)
Aug 16 14:56:53 localhost cardmgr[1700]: + /etc/wlan/shared: line 131:
_fwload: command not found
Aug 16 14:56:53 localhost cardmgr[1700]: + Firmware failed to load for
device wlan0
Aug 16 14:56:54 localhost iiimd[2453]: Client shut down the connection
owned by im_id(1).
Aug 16 14:56:57 localhost pam_timestamp_check: pam_timestamp: `/var/'
owner GID != 0
Aug 16 14:56:58 localhost cardmgr[1700]: + wlanctl-ng: Permission denied
Aug 16 14:56:58 localhost cardmgr[1700]: + error: Autojoin indicated failure!
Aug 16 14:56:58 localhost cardmgr[1700]: + cp: 无法创建一般文件(can not create
normal file) '/tmp/wlan_scheme_14:56:58.tmp': 权限不够(Authentication is
not enough)
Aug 16 14:56:58 localhost cardmgr[1700]: + ls: /tmp/wlan_scheme*.tmp:
没有那个文件或目录(No such file or directory)
Aug 16 14:56:58 localhost cardmgr[1700]: + cat: -: 错误的文件描述符(Wrong file
description)
Aug 16 14:56:58 localhost cardmgr[1700]: + cat: closing standard
input: 错误的文件描述符(Wrong file description)
****************************************************************************************

I used 'root' id to operate. I'm really puzzled by these messages.
Does anyone can tell me where is the keypoint of my problem? Or, if
there anyone has driven WPC-11(version 1) successfully on even lower
version kernel? Can you share your experiences with me?

Thank you very much. Any hint is welcome.
-- 
Bob