Can I change the value of some parameters?
"John" <[email protected]>
| Newsgroups | gmane.linux.linux-wlan.user |
|---|---|
| Message-ID | <[email protected]> |
Hi all I use D-link DWL122,the following command is used to set the card on ad-hoc mode: wlanctl-ng wlan0 dot11req_start ssid=mywlan bsstype=independent beaconperiod=100 dtimperiod=3 cfpollable=false cfpollreq=false cfpperiod=3 cfpmaxduration=100 probedelay=100 dschannel=6 basicrate1=2 basicrate2=4 operationalrate1=2 operationalrate2=4 operationalrate3=11 operationalrate4=22 And it took a long time to connect another PC(with different ssid) when I change the ssid with the command. Can I change the value of some parameters(such as beaconperiod=10 etc.) in order to improve the performance?If not,is there any other way to improve the performance? Thanks in advance for any hints! John _______________________________________________ Linux-wlan-user mailing list [email protected] http://lists.linux-wlan.com/mailman/listinfo/linux-wlan-user