CVS: src/si/phase4/package-build bootscripts4b.xml,NONE,1.1 bootscripts4c.xml,NONE,1.1 config-sysvinit4c.xml,NONE,1.1 package-build4a.xml,1.4,1.5 package-build4b.xml,1.4,1.5 package-build4c.xml,1.4,1.5 util-linux.xml,1.2,1.3

Mats Wichmann <[email protected]>
Newsgroups gmane.linux.lsb.implementation
Message-ID <[email protected]> 
Update of /cvsroot/lsb/src/si/phase4/package-build
In directory sc8-pr-cvs1:/tmp/cvs-serv26622/phase4/package-build

Modified Files:
	package-build4a.xml package-build4b.xml package-build4c.xml 
	util-linux.xml 
Added Files:
	bootscripts4b.xml bootscripts4c.xml config-sysvinit4c.xml 
Log Message:
Added files and configuration to set up phase 4c (uml). Where applicable,
similar changes were made to 4b (bootable), but these are not tested.


--- NEW FILE ---
<package>
	<name>lfs-bootscripts</name>
	<version>&bootscripts-version;</version>

	<prebuild>
		<unpack>
			<archive>&packages_dir;/&bootscripts-package;</archive>
			<destination>&phase4_build_dir;</destination>
		</unpack>
		<execute>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/init.d</base>
			<command>sed</command>
			<param>-e 's/loadproc/loadproc inetd/' </param>
			<param>-e 's/killproc/killproc inetd/'</param>
			<param>-e 's/\.\.\./ inetd .../'</param>
			<param>template</param>
			<param> > inetd</param>
		</execute>
		<permissions>
			<mode>755</mode>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/init.d</base>
			<name>inetd</name>
		</permissions>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc0.d</base>
			<target>../init.d/inetd</target>
			<name>K35inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc1.d</base>
			<target>../init.d/inetd</target>
			<name>K35inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc2.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc3.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc4.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc5.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc6.d</base>
			<target>../init.d/inetd</target>
			<name>K35inetd</name>
		</link>
	</prebuild>

	<postbuild>
		<copy>
			<options>archive</options>
			<base>&phase4_build_dir;/&bootscripts-directory;</base>
			<source>rc.d sysconfig</source>
			<destination>&LSBsi-phase4-install;/etc</destination>
		</copy>
		<!-- checkfs is okay for bootable, not for uml
		<move>
			<base>&LSBsi-phase4-install;/etc/rc.d/rcsysinit.d</base>
			<source>S30checkfs</source>
			<destination>xS30checkfs</destination>
		</move>
		-->
		<move>
			<base>&LSBsi-phase4-install;/etc/rc.d/rcsysinit.d</base>
			<source>S60setclock</source>
			<destination>xS60setclock</destination>
		</move>
		<move>
			<base>&LSBsi-phase4-install;/etc/rc.d/rcsysinit.d</base>
			<source>S70loadkeys</source>
			<destination>xS70loadkeys</destination>
		</move>

		<remove>&phase4_build_dir;/&bootscripts-directory;</remove>
	</postbuild>
</package>

--- NEW FILE ---
<package>
	<name>lfs-bootscripts</name>
	<version>&bootscripts-version;</version>

	<prebuild>
		<unpack>
			<archive>&packages_dir;/&bootscripts-package;</archive>
			<destination>&phase4_build_dir;</destination>
		</unpack>
		<execute>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/init.d</base>
			<command>sed</command>
			<param>-e 's/loadproc/loadproc inetd/' </param>
			<param>-e 's/killproc/killproc inetd/'</param>
			<param>-e 's/\.\.\./ inetd .../'</param>
			<param>template</param>
			<param> > inetd</param>
		</execute>
		<permissions>
			<mode>755</mode>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/init.d</base>
			<name>inetd</name>
		</permissions>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc0.d</base>
			<target>../init.d/inetd</target>
			<name>K35inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc1.d</base>
			<target>../init.d/inetd</target>
			<name>K35inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc2.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc3.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc4.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc5.d</base>
			<target>../init.d/inetd</target>
			<name>S75inetd</name>
		</link>
		<link type="symbolic">
			<options>force</options>
			<base>&phase4_build_dir;/&bootscripts-directory;/rc.d/rc6.d</base>
			<target>../init.d/inetd</target>
			<name>K35inetd</name>
		</link>
	</prebuild>

	<postbuild>
		<copy>
			<options>archive</options>
			<base>&phase4_build_dir;/&bootscripts-directory;</base>
			<source>rc.d sysconfig</source>
			<destination>&LSBsi-phase4-install;/etc</destination>
		</copy>
		<!-- checkfs is okay for bootable, not for uml -->
		<move>
			<base>&LSBsi-phase4-install;/etc/rc.d/rcsysinit.d</base>
			<source>S30checkfs</source>
			<destination>xS30checkfs</destination>
		</move>
		<move>
			<base>&LSBsi-phase4-install;/etc/rc.d/rcsysinit.d</base>
			<source>S60setclock</source>
			<destination>xS60setclock</destination>
		</move>
		<move>
			<base>&LSBsi-phase4-install;/etc/rc.d/rcsysinit.d</base>
			<source>S70loadkeys</source>
			<destination>xS70loadkeys</destination>
		</move>

		<remove>&phase4_build_dir;/&bootscripts-directory;</remove>
	</postbuild>
</package>

--- NEW FILE ---
<textdump>
	<base>&LSBsi-phase4-install;/etc</base>
	<file>inittab</file>
	<content>
		=# Begin /etc/inittab
		=
		=id:3:initdefault:
		=
		=si::sysinit:/etc/rc.d/init.d/rc sysinit
		=
		=l0:0:wait:/etc/rc.d/init.d/rc 0
		=l1:S1:wait:/etc/rc.d/init.d/rc 1
		=l2:2:wait:/etc/rc.d/init.d/rc 2
		=l3:3:wait:/etc/rc.d/init.d/rc 3
		=l4:4:wait:/etc/rc.d/init.d/rc 4
		=l5:5:wait:/etc/rc.d/init.d/rc 5
		=l6:6:wait:/etc/rc.d/init.d/rc 6
		=
		=ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
		=
		=su:S016:respawn:/sbin/sulogin
		=
		=co:2345:respawn:/sbin/agetty console 9600
		=1:2345:respawn:/sbin/agetty tty1 9600
		=2:2345:respawn:/sbin/agetty tty2 9600
		=3:2345:off:/sbin/agetty tty3 9600
		=4:2345:off:/sbin/agetty tty4 9600
		=5:2345:off:/sbin/agetty tty5 9600
		=6:2345:off:/sbin/agetty tty6 9600
		=
		=# End /etc/inittab
	</content>
</textdump>

Index: package-build4a.xml
===================================================================
RCS file: /cvsroot/lsb/src/si/phase4/package-build/package-build4a.xml,v
retrieving revision 1.4
retrieving revision 1.5
diff -C2 -r1.4 -r1.5
*** package-build4a.xml	16 Jan 2003 15:44:22 -0000	1.4
--- package-build4a.xml	24 Jan 2003 20:25:47 -0000	1.5
***************
*** 15,19 ****
  	&phase4a-build-telnetd;
  	&phase4a-build-util-linux;
! 
! 	<!--&phase4a-build-configure; -->
  </chroot>
--- 15,18 ----
  	&phase4a-build-telnetd;
  	&phase4a-build-util-linux;
! 	<!-- &phase4a-build-bootscripts; -->
  </chroot>

Index: package-build4b.xml
===================================================================
RCS file: /cvsroot/lsb/src/si/phase4/package-build/package-build4b.xml,v
retrieving revision 1.4
retrieving revision 1.5
diff -C2 -r1.4 -r1.5
*** package-build4b.xml	16 Jan 2003 15:44:22 -0000	1.4
--- package-build4b.xml	24 Jan 2003 20:25:47 -0000	1.5
***************
*** 15,19 ****
  	&phase4b-build-telnetd;
  	&phase4b-build-util-linux;
! 
! 	<!--&phase4b-build-configure; -->
  </chroot>
--- 15,18 ----
  	&phase4b-build-telnetd;
  	&phase4b-build-util-linux;
! 	&phase4b-build-bootscripts;
  </chroot>

Index: package-build4c.xml
===================================================================
RCS file: /cvsroot/lsb/src/si/phase4/package-build/package-build4c.xml,v
retrieving revision 1.4
retrieving revision 1.5
diff -C2 -r1.4 -r1.5
*** package-build4c.xml	16 Jan 2003 15:44:22 -0000	1.4
--- package-build4c.xml	24 Jan 2003 20:25:47 -0000	1.5
***************
*** 8,12 ****
  	<!-- &phase4c-build-kbd; -->
  	<!-- &phase4c-build-kernel; -->
! 	<!-- &phase4c-build-modutils; -->
  	&phase4c-build-pax;
  	&phase4c-build-syslog;
--- 8,12 ----
  	<!-- &phase4c-build-kbd; -->
  	<!-- &phase4c-build-kernel; -->
! 	&phase4c-build-modutils;
  	&phase4c-build-pax;
  	&phase4c-build-syslog;
***************
*** 15,19 ****
  	&phase4c-build-telnetd;
  	&phase4c-build-util-linux;
! 
! 	<!--&phase4c-build-configure; -->
  </chroot>
--- 15,19 ----
  	&phase4c-build-telnetd;
  	&phase4c-build-util-linux;
! 	&phase4c-build-bootscripts;
! 	&phase4c-build-config-sysvinit;
  </chroot>

Index: util-linux.xml
===================================================================
RCS file: /cvsroot/lsb/src/si/phase4/package-build/util-linux.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -C2 -r1.2 -r1.3
*** util-linux.xml	16 Jan 2003 15:21:30 -0000	1.2
--- util-linux.xml	24 Jan 2003 20:25:47 -0000	1.3
***************
*** 37,47 ****
  		</make>
  		<move>
! 		    <base>&LSBsi-phase4-install;/tmp/util-linux</base>
! 		    <source>sbin/losetup</source>
! 		    <destination>&LSBsi-phase4-install;/sbin</destination>
! 		</move>
! 		<move>
! 		    <base>&LSBsi-phase4-install;/tmp/util-linux</base>
! 		    <source>sbin/agetty</source>
  		    <destination>&LSBsi-phase4-install;/sbin</destination>
  		</move>
--- 37,42 ----
  		</make>
  		<move>
! 			<base>&LSBsi-phase4-install;/tmp/util-linux/sbin</base>
! 		    <source>losetup agetty swapon swapoff</source>
  		    <destination>&LSBsi-phase4-install;/sbin</destination>
  		</move>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.