main - configure: update

Zdenek Kabelac <[email protected]>
Newsgroups gmane.linux.lvm.devel
Message-ID <[email protected]> 
Gitweb:        https://sourceware.org/git/?p=lvm2.git;a=commitdiff;h=07cd341bd87a7559f33862a5a7480687b30e5f9c
Commit:        07cd341bd87a7559f33862a5a7480687b30e5f9c
Parent:        1e55e5c60a1b6067d7a46f881d78b2ab7d1431eb
Author:        Zdenek Kabelac <[email protected]>
AuthorDate:    Fri Feb 10 22:54:33 2023 +0100
Committer:     Zdenek Kabelac <[email protected]>
CommitterDate: Mon Feb 13 14:30:47 2023 +0100

configure: update

---
 configure | 86 +++++++++++++++++++++++++++++----------------------------------
 1 file changed, 39 insertions(+), 47 deletions(-)

diff --git a/configure b/configure
index 7b160639f..3e09aa265 100755
--- a/configure
+++ b/configure
@@ -674,7 +674,6 @@ SILENT_RULES
 USE_TRACKING
 UDEV_HAS_BUILTIN_BLKID
 UDEV_RULE_EXEC_DETECTION
-UDEV_SYSTEMD_BACKGROUND_JOBS
 UDEV_SYNC
 UDEV_RULES
 UDEV_PC
@@ -773,6 +772,7 @@ CLDNOWHOLEARCHIVE
 CLDFLAGS
 CACHE
 BUILD_DMFILEMAPD
+BUILD_LOCKDIDM
 BUILD_LOCKDDLM_CONTROL
 BUILD_LOCKDDLM
 BUILD_LOCKDSANLOCK
@@ -9623,8 +9623,8 @@ fi
 		if test -z "$THIN_CHECK_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: thin_check not found in path $PATH" >&5
-printf "%s\n" "$as_me: WARNING: thin_check not found in path $PATH" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: thin_check not found in path $PATH_SBIN" >&5
+printf "%s\n" "$as_me: WARNING: thin_check not found in path $PATH_SBIN" >&2;}
 			THIN_CHECK_CMD="/usr/sbin/thin_check"
 			THIN_CONFIGURE_WARN="y"
 
@@ -9772,8 +9772,8 @@ fi
 		if test -z "$THIN_DUMP_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"thin_dump not found in path $PATH\"" >&5
-printf "%s\n" "$as_me: WARNING: \"thin_dump not found in path $PATH\"" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"thin_dump not found in path $PATH_SBIN\"" >&5
+printf "%s\n" "$as_me: WARNING: \"thin_dump not found in path $PATH_SBIN\"" >&2;}
 			THIN_DUMP_CMD="/usr/sbin/thin_dump"
 			THIN_CONFIGURE_WARN="y"
 
@@ -9895,8 +9895,8 @@ fi
 		if test -z "$THIN_REPAIR_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"thin_repair not found in path $PATH\"" >&5
-printf "%s\n" "$as_me: WARNING: \"thin_repair not found in path $PATH\"" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"thin_repair not found in path $PATH_SBIN\"" >&5
+printf "%s\n" "$as_me: WARNING: \"thin_repair not found in path $PATH_SBIN\"" >&2;}
 			THIN_REPAIR_CMD="/usr/sbin/thin_repair"
 			THIN_CONFIGURE_WARN="y"
 
@@ -10018,8 +10018,8 @@ fi
 		if test -z "$THIN_RESTORE_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"thin_restore not found in path $PATH\"" >&5
-printf "%s\n" "$as_me: WARNING: \"thin_restore not found in path $PATH\"" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"thin_restore not found in path $PATH_SBIN\"" >&5
+printf "%s\n" "$as_me: WARNING: \"thin_restore not found in path $PATH_SBIN\"" >&2;}
 			THIN_RESTORE_CMD="/usr/sbin/thin_restore"
 			THIN_CONFIGURE_WARN="y"
 
@@ -10252,8 +10252,8 @@ fi
 		if test -z "$CACHE_CHECK_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache_check not found in path $PATH" >&5
-printf "%s\n" "$as_me: WARNING: cache_check not found in path $PATH" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache_check not found in path $PATH_SBIN" >&5
+printf "%s\n" "$as_me: WARNING: cache_check not found in path $PATH_SBIN" >&2;}
 			CACHE_CHECK_CMD="/usr/sbin/cache_check"
 			CACHE_CONFIGURE_WARN="y"
 
@@ -10419,8 +10419,8 @@ fi
 		if test -z "$CACHE_DUMP_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"cache_dump not found in path $PATH\"" >&5
-printf "%s\n" "$as_me: WARNING: \"cache_dump not found in path $PATH\"" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"cache_dump not found in path $PATH_SBIN\"" >&5
+printf "%s\n" "$as_me: WARNING: \"cache_dump not found in path $PATH_SBIN\"" >&2;}
 			CACHE_DUMP_CMD="/usr/sbin/cache_dump"
 			CACHE_CONFIGURE_WARN="y"
 
@@ -10542,8 +10542,8 @@ fi
 		if test -z "$CACHE_REPAIR_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"cache_repair not found in path $PATH\"" >&5
-printf "%s\n" "$as_me: WARNING: \"cache_repair not found in path $PATH\"" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"cache_repair not found in path $PATH_SBIN\"" >&5
+printf "%s\n" "$as_me: WARNING: \"cache_repair not found in path $PATH_SBIN\"" >&2;}
 			CACHE_REPAIR_CMD="/usr/sbin/cache_repair"
 			CACHE_CONFIGURE_WARN="y"
 
@@ -10665,8 +10665,8 @@ fi
 		if test -z "$CACHE_RESTORE_CMD"
 then :
 
-			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"cache_restore not found in path $PATH\"" >&5
-printf "%s\n" "$as_me: WARNING: \"cache_restore not found in path $PATH\"" >&2;}
+			{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: \"cache_restore not found in path $PATH_SBIN\"" >&5
+printf "%s\n" "$as_me: WARNING: \"cache_restore not found in path $PATH_SBIN\"" >&2;}
 			CACHE_RESTORE_CMD="/usr/sbin/cache_restore"
 			CACHE_CONFIGURE_WARN="y"
 
@@ -12051,15 +12051,13 @@ printf %s "checking whether to build lvmlockdsanlock... " >&6; }
 # Check whether --enable-lvmlockd-sanlock was given.
 if test ${enable_lvmlockd_sanlock+y}
 then :
-  enableval=$enable_lvmlockd_sanlock; LOCKDSANLOCK=$enableval
+  enableval=$enable_lvmlockd_sanlock; BUILD_LOCKDSANLOCK=$enableval
 else $as_nop
-  LOCKDSANLOCK="no"
+  BUILD_LOCKDSANLOCK="no"
 fi
 
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $LOCKDSANLOCK" >&5
-printf "%s\n" "$LOCKDSANLOCK" >&6; }
-
-BUILD_LOCKDSANLOCK=$LOCKDSANLOCK
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $BUILD_LOCKDSANLOCK" >&5
+printf "%s\n" "$BUILD_LOCKDSANLOCK" >&6; }
 
 if test "$BUILD_LOCKDSANLOCK" = "yes"
 then :
@@ -12133,7 +12131,7 @@ else
 	LOCKD_SANLOCK_LIBS=$pkg_cv_LOCKD_SANLOCK_LIBS
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-	HAVE_LOCKD_SANLOCK=yes
+	HAVE_LOCKD_SANLOCK="yes"
 fi
 
 printf "%s\n" "#define LOCKDSANLOCK_SUPPORT 1" >>confdefs.h
@@ -12148,15 +12146,13 @@ printf %s "checking whether to build lvmlockddlm... " >&6; }
 # Check whether --enable-lvmlockd-dlm was given.
 if test ${enable_lvmlockd_dlm+y}
 then :
-  enableval=$enable_lvmlockd_dlm; LOCKDDLM=$enableval
+  enableval=$enable_lvmlockd_dlm; BUILD_LOCKDDLM=$enableval
 else $as_nop
-  LOCKDDLM="no"
+  BUILD_LOCKDDLM="no"
 fi
 
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $LOCKDDLM" >&5
-printf "%s\n" "$LOCKDDLM" >&6; }
-
-BUILD_LOCKDDLM=$LOCKDDLM
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $BUILD_LOCKDDLM" >&5
+printf "%s\n" "$BUILD_LOCKDDLM" >&6; }
 
 if test "$BUILD_LOCKDDLM" = "yes"
 then :
@@ -12230,7 +12226,7 @@ else
 	LOCKD_DLM_LIBS=$pkg_cv_LOCKD_DLM_LIBS
         { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-	HAVE_LOCKD_DLM=yes
+	HAVE_LOCKD_DLM="yes"
 fi
 
 printf "%s\n" "#define LOCKDDLM_SUPPORT 1" >>confdefs.h
@@ -12245,15 +12241,13 @@ printf %s "checking whether to build lvmlockddlmcontrol... " >&6; }
 # Check whether --enable-lvmlockd-dlmcontrol was given.
 if test ${enable_lvmlockd_dlmcontrol+y}
 then :
-  enableval=$enable_lvmlockd_dlmcontrol; LOCKDDLM_CONTROL=$enableval
+  enableval=$enable_lvmlockd_dlmcontrol; BUILD_LOCKDDLM_CONTROL=$enableval
 else $as_nop
-  LOCKDDLM_CONTROL="no"
+  BUILD_LOCKDDLM_CONTROL="no"
 fi
 
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $LOCKDDLM_CONTROL" >&5
-printf "%s\n" "$LOCKDDLM_CONTROL" >&6; }
-
-BUILD_LOCKDDLM_CONTROL=$LOCKDDLM_CONTROL
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $BUILD_LOCKDDLM_CONTROL" >&5
+printf "%s\n" "$BUILD_LOCKDDLM_CONTROL" >&6; }
 
 if test "$BUILD_LOCKDDLM_CONTROL" = "yes"
 then :
@@ -12342,15 +12336,13 @@ printf %s "checking whether to build lvmlockdidm... " >&6; }
 # Check whether --enable-lvmlockd-idm was given.
 if test ${enable_lvmlockd_idm+y}
 then :
-  enableval=$enable_lvmlockd_idm; LOCKDIDM=$enableval
+  enableval=$enable_lvmlockd_idm; BUILD_LOCKDIDM=$enableval
 else $as_nop
-  LOCKDIDM="no"
+  BUILD_LOCKDIDM="no"
 fi
 
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $LOCKDIDM" >&5
-printf "%s\n" "$LOCKDIDM" >&6; }
-
-BUILD_LOCKDIDM=$LOCKDIDM
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $BUILD_LOCKDIDM" >&5
+printf "%s\n" "$BUILD_LOCKDIDM" >&6; }
 
 if test "$BUILD_LOCKDIDM" = "yes"
 then :
@@ -12672,9 +12664,9 @@ if test -n "$PKG_CONFIG" && \
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  SYSTEMD_MIN_VERSION=234  APP_MACHINEID_SUPPORT=maybe
+  SYSTEMD_MIN_VERSION=234  APP_MACHINEID_SUPPORT="maybe"
 else
-  APP_MACHINEID_SUPPORT=no
+  APP_MACHINEID_SUPPORT="no"
 fi
 ac_fn_c_check_header_compile "$LINENO" "systemd/sd-id128.h" "ac_cv_header_systemd_sd_id128_h" "$ac_includes_default"
 if test "x$ac_cv_header_systemd_sd_id128_h" = xyes
@@ -12684,7 +12676,7 @@ then :
   APP_MACHINEID_SUPPORT="yes"
 fi
 else $as_nop
-  APP_MACHINEID_SUPPORT=no
+  APP_MACHINEID_SUPPORT="no"
 fi
 
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether to support systemd appmachineid" >&5
@@ -14885,7 +14877,7 @@ then :
 
 printf "%s\n" "#define READLINE_SUPPORT 1" >>confdefs.h
 
-				READLINE=yes
+				READLINE="yes"
 		LIBS=$lvm_saved_libs
 		{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for rl_line_buffer in -lreadline" >&5
 printf %s "checking for rl_line_buffer in -lreadline... " >&6; }

--
lvm-devel mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/lvm-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.