Replace Drive in RAID6
Adam Puleo <[email protected]>
| Newsgroups | gmane.linux.lvm.general |
|---|---|
| Message-ID | <[email protected]> |
Hello, One of my drives failed in my RAID6 and I’m trying to replace it without success. I’m trying to rebuild the failed drive (/dev/sda): lvchange --rebuild /dev/sda vg_data But I’m receiving the error: vg_data/lv_data must be active to perform this operation. I have tried to activate the logical volume without success. How do I go about activating the volume so that I can rebuild the failed drive? Thanks, -Adam # lvs -a -o name,segtype,devices LV Type Devices lv_data raid6 lv_data_rimage_0(0),lv_data_rimage_1(0),lv_data_rimage_2(0),lv_data_rimage_3(0),lv_data_rimage_4(0) [lv_data_rimage_0] error [lv_data_rimage_1] linear /dev/sdc1(1) [lv_data_rimage_2] linear /dev/sdb1(1) [lv_data_rimage_3] linear /dev/sdf1(1) [lv_data_rimage_4] linear /dev/sde1(2) [lv_data_rmeta_0] error [lv_data_rmeta_1] linear /dev/sdc1(0) [lv_data_rmeta_2] linear /dev/sdb1(0) [lv_data_rmeta_3] linear /dev/sdf1(0) [lv_data_rmeta_4] linear /dev/sde1(0) # lvs -a LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert lv_data vg_data rwi---r--- 990.00g [lv_data_rimage_0] vg_data vwi-a-r-r- 330.00g [lv_data_rimage_1] vg_data Iwi-a-r-r- 330.00g [lv_data_rimage_2] vg_data Iwi-a-r-r- 330.00g [lv_data_rimage_3] vg_data Iwi-a-r-r- 330.00g [lv_data_rimage_4] vg_data Iwi-a-r-r- 330.00g [lv_data_rmeta_0] vg_data ewi-a-r-r- 4.00m [lv_data_rmeta_1] vg_data ewi-a-r-r- 4.00m [lv_data_rmeta_2] vg_data ewi-a-r-r- 4.00m [lv_data_rmeta_3] vg_data ewi-a-r-r- 4.00m [lv_data_rmeta_4] vg_data ewi-a-r-r- 4.00m _______________________________________________ linux-lvm mailing list [email protected] https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/