Failed hard-drive install (SATA+RAID1)

Module                  Size  Used by
vfat 8576 1 - Live 0xffffffff880f8000
nls_iso8859-1 4224 1 - Live 0xffffffff880f5000
nls_cp437 5760 1 - Live 0xffffffff880f2000
fat 25904 1 vfat, Live 0xffffffff880ea000
floppy 43632 0 - Live 0xffffffff880de000
dm-mirror 11016 0 - Live 0xffffffff880da000
dm-mod 31832 1 dm-mirror, Live 0xffffffff880d1000
sr_mod 10148 0 - Live 0xffffffff880cd000
ide-cd 29088 0 - Live 0xffffffff880c4000
cdrom 27560 2 sr_mod,ide-cd, Live 0xffffffff880bc000
usbhid 18688 0 - Live 0xffffffff880b6000
af_packet 7948 0 - Live 0xffffffff880b3000
isofs 15624 1 - Live 0xffffffff880ae000
gzloop 2944 1 - Live 0xffffffff880ac000
zlib_inflate 12160 1 gzloop, Live 0xffffffff880a8000
cryptoloop 1792 0 - Live 0xffffffff880a6000
loop 7568 4 gzloop,cryptoloop, Live 0xffffffff880a3000
sbp2 15240 0 - Live 0xffffffff8809e000
usb-storage 42628 1 - Live 0xffffffff88092000
sata_via 3332 1 - Live 0xffffffff88090000
libata 25352 1 sata_via, Live 0xffffffff88088000
sd_mod 9752 4 - Live 0xffffffff88084000
scsi_mod 48848 5 sr_mod,sbp2,usb-storage,libata,sd_mod, Live 0xffffffff88077000
usbkbd 4224 0 - Live 0xffffffff88074000
ehci-hcd 18952 0 - Live 0xffffffff8806e000
uhci-hcd 21152 0 - Live 0xffffffff88067000
usbcore 70000 6 usbhid,usb-storage,usbkbd,ehci-hcd,uhci-hcd, Live 0xffffffff88054000
ohci1394 22148 0 - Live 0xffffffff8804d000
ieee1394 311000 2 sbp2,ohci1394, Live 0xffffffff88000000

* getFile install/stage2/VERSION: (1:disk)
* second stage install running (DrakX v1.1045 built Wed Jun 29 03:00:24 2005)
* mounting none on /sys as type sysfs, options 
* calling mount -t sysfs none /sys ro
* running: mount -t sysfs none /sys -o ro
* calling umount(/stage1/proc/bus/usb)
* calling umount(/stage1/proc)
* calling umount(/stage1)
* adding alias ieee1394-controller to ohci1394
* setting probeall usb-interface to uhci-hcd
* mounting none on /proc/bus/usb as type usbfs, options 
* calling mount -t usbfs none /proc/bus/usb 
* running: mount -t usbfs none /proc/bus/usb
* getFile install/stage2/VERSION: (1:disk)
* missing module keybdev
* setting probeall usb-interface to uhci-hcd ehci-hcd
* setting probeall scsi_hostadapter to sata_via
* setting probeall scsi_hostadapter to sata_via usb-storage
* setting probeall scsi_hostadapter to sata_via usb-storage sbp2
* setting probeall usb-interface to uhci-hcd ehci-hcd
* setting probeall usb-interface to uhci-hcd ehci-hcd
* setting probeall usb-interface to uhci-hcd ehci-hcd
* setting probeall usb-interface to uhci-hcd ehci-hcd
* setting probeall usb-interface to uhci-hcd ehci-hcd
* getFile install/patch-oem.pl: (1:disk)
* Can not open /tmp/image/install/patch-oem.pl: No such file or directory
* errorOpeningFile install/patch-oem.pl
* running: insmod_ /tmp/af_packet.ko
* adding alias sound-slot-0 to snd-via82xx
* running: insmod_ /tmp/usbhid.ko
* running: monitor-edid -v --perl
* getFile VERSION: (1:disk)
* meta_class download
* Trying with server Driver:fbdev
* waiting for the server to start (1 )
* waiting for the server to start (2 1)
* waiting for the server to start (3 2)
* AFAIK X server is up
* lang:en_US charset:C font:Sans 12 sfm:lat0-16
* starting step `selectLanguage'
* selectLanguage: pack_langs: en_US:en:es_ES:es:fr_FR:fr utf8-flag: 1
* loading keymap us
* running: xmodmap /usr/share/xmodmap/xmodmap.us
* lang:en_US charset:C font:Sans 12 sfm:lat0-16
* step `selectLanguage' finished
* starting step `acceptLicense'
* getFile release-notes.txt: (1:disk)
* getFile release-notes.x86_64.txt: (1:disk)
* step `acceptLicense' finished
* starting step `selectMouse'
* step `selectMouse' finished
* starting step `setupSCSI'
* running: insmod_ /tmp/cdrom.ko
* running: insmod_ /tmp/ide-cd.ko
* running: insmod_ /tmp/sr_mod.ko
* setting probeall scsi_hostadapter to sata_via usb-storage sbp2
* running: insmod_ /tmp/dm-mod.ko
* running: insmod_ /tmp/dm-mirror.ko
* running: dmraid -ay
ERROR: dos: reading /dev/mapper/via_cbghaecfdi[No such file or directory]
* running: dmraid -rcc
* dmraid: mapper/via_cbghaecfdi [/dev/sda /dev/sdb]
* id2hd: 
* id2edd: 0x77f69c1f=>/sys/firmware/edd/int13_dev80
* test_for_bad_drives(/dev/mapper/via_cbghaecfdi)
* error: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem at /usr/lib/libDrakX/install_any.pm line 1616.

* starting step `setupSCSI'
* setting probeall scsi_hostadapter to sata_via usb-storage sbp2
* running: dmraid -rcc
* dmraid: mapper/via_cbghaecfdi [/dev/sda /dev/sdb]
* id2hd: 
* id2edd: 0x77f69c1f=>/sys/firmware/edd/int13_dev80
* test_for_bad_drives(/dev/mapper/via_cbghaecfdi)
* error: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem at /usr/lib/libDrakX/install_any.pm line 1616.

* starting step `setupSCSI'
* setting probeall scsi_hostadapter to sata_via usb-storage sbp2
* running: dmraid -rcc
* dmraid: mapper/via_cbghaecfdi [/dev/sda /dev/sdb]
* id2hd: 
* id2edd: 0x77f69c1f=>/sys/firmware/edd/int13_dev80
* test_for_bad_drives(/dev/mapper/via_cbghaecfdi)
* error: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem at /usr/lib/libDrakX/install_any.pm line 1616.

* missing module dm
* error: insmod'ing module dm failed at /usr/lib/libDrakX/modules.pm line 321.

* starting step `setupSCSI'
* setting probeall scsi_hostadapter to sata_via usb-storage sbp2
* setting probeall scsi_hostadapter to sata_via usb-storage sbp2
* running: dmraid -rcc
* dmraid: mapper/via_cbghaecfdi [/dev/sda /dev/sdb]
* id2hd: 0xc3072e18=>sdc
* id2edd: 0x77f69c1f=>/sys/firmware/edd/int13_dev80
* test_for_bad_drives(/dev/sdc)
* found a dos partition table on /dev/sdc at sector 0
* guess_geometry_from_partition_table sdc: 1018/16/62
* sdc: no valid geometry guessed from partition table
* test_for_bad_drives(/dev/mapper/via_cbghaecfdi)
* running: insmod_ /tmp/floppy.ko
* found mounted partition on rootfs with /
* found mounted partition on none with /
* found mounted partition on sda7 with /tmp/hdimage
* found hdimage on sda7
* found mounted partition on loop0 with /tmp/stage2
* found mounted partition on /proc with /proc
* found mounted partition on none with /sys
* found mounted partition on none with /proc/bus/usb
* found mounted partition on rootfs with /
* found mounted partition on none with /
* found mounted partition on sda7 with /tmp/hdimage
* found hdimage on sda7
* found mounted partition on loop0 with /tmp/stage2
* found mounted partition on /proc with /proc
* found mounted partition on none with /sys
* found mounted partition on none with /proc/bus/usb
* step `setupSCSI' finished
* starting step `selectInstallClass'
* mounting /dev/sdc1 on /tmp/inspect_tmp_dir as type vfat, options 
* running: insmod_ /tmp/fat.ko
* running: insmod_ /tmp/nls_cp437.ko
* running: insmod_ /tmp/nls_iso8859-1.ko
* running: insmod_ /tmp/vfat.ko
* calling mount -t vfat /dev/sdc1 /tmp/inspect_tmp_dir check=relaxed ro
* running: mount -t vfat /dev/sdc1 /tmp/inspect_tmp_dir -o check=relaxed,ro
* calling umount(/tmp/inspect_tmp_dir)
* step `selectInstallClass' finished
* starting step `selectKeyboard'
* loading keymap us
* running: xmodmap /usr/share/xmodmap/xmodmap.us
* step `selectKeyboard' finished
* starting step `miscellaneous'
* security 3
* running: dmidecode 
* unknown package `libsafe'
* step `miscellaneous' finished
* starting step `doPartitionDisks'
* calling umount(/mnt/sys)
* calling umount(/mnt/proc/bus/usb)
* calling umount(/mnt/proc)
* unmounting all filesystems
* mounting /dev/sdc1 on /tmp/tmp_fs_df as type vfat, options 
* calling mount -t vfat /dev/sdc1 /tmp/tmp_fs_df check=relaxed ro
* running: mount -t vfat /dev/sdc1 /tmp/tmp_fs_df -o check=relaxed,ro
* calling umount(/tmp/tmp_fs_df)
* partitioning wizard log:
>>wizlog>>Not enough free space to allocate new partitions: 0 < 819200
>>wizlog>>There is no existing partition to use
>>wizlog>>There is no FAT partition to use as loopback (or not enough space left)
FAT partitions:
  sdc1 71160 (1126400)

* solutions found: Remove Windows(TM)Use the free space on the Windows partitionCustom disk partitioning (all solutions found: Remove Windows(TM)Use the free space on the Windows partitionCustom disk partitioning)
* solutions: 3
* HERE: Remove Windows(TM),Use the free space on the Windows partition,Custom disk partitioning
* partitionWizard calling solution Custom disk partitioning

rootfs on / type rootfs (rw)
none on / type tmpfs (rw)
/dev/sda7 on /tmp/hdimage type ext2 (ro)
/dev/loop0 on /tmp/stage2 type iso9660 (ro)
/proc on /proc type proc (rw,nodiratime)
none on /sys type sysfs (ro)
none on /proc/bus/usb type usbfs (rw)
/dev/sdc1 on /mnt type vfat (rw,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)

* welcome to the Mandrakelinux install (mdk-stage1, version 10.2 built Jun 29 2005 02:02:26)
* opening /proc/cmdline... 
* 	BOOT_IMAGE=all-install ro root=103 ramdisk_size=700000 console=tty0
* 	got 5 args
* spawning a shell
* cannot open shell - /tmp/sh doesn't exist
* loading modules dependencies
* PCI: device 1106 3044 1043 808a is "Firewire Controller", driver is ohci1394
* have to insmod ohci1394
* needs ieee1394
* needs ohci1394
* 	succeeded ohci1394
* PCI: could not open file for full probe (/proc/bus/pci/00/00.4)
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* have to insmod uhci-hcd
* needs usbcore
* needs uhci-hcd
* 	succeeded uhci-hcd
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* PCI: device 1106 3104 1043 80ed is "USB Controller", driver is ehci-hcd
* have to insmod ehci-hcd
* needs ehci-hcd
* 	succeeded ehci-hcd
* have to insmod usbkbd
* needs usbkbd
* 	succeeded usbkbd
* have to insmod keybdev
* needs keybdev
* /modules/modules.mar: No such file or directory
* warning, insmod failed (keybdev (null)) (1)
* PCMCIA: probing PCI bus..
* 	not found.
* PCMCIA: probing for Intel PCIC (ISA)..
* 	not found.
* PCMCIA: probing for Databook TCIC-2 (ISA)..
* 	not found.
* no pcmcia adapter found
* exiting bootsplash
* opening /proc/splash failed
* have to insmod sd_mod
* needs scsi_mod
* needs sd_mod
* 	succeeded sd_mod
* looking for SCSI adapters
* PCI: device 1106 3044 1043 808a is "Firewire Controller", driver is ohci1394
* PCI: device 1106 3149 1043 80ed is "VIA Technologies Inc|VT6420 SATA RAID Controller", driver is sata_via
* have to insmod sata_via
* needs libata
* needs sata_via
* 	succeeded sata_via
* PCI: could not open file for full probe (/proc/bus/pci/00/00.4)
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* PCI: device 1106 3038 1043 80ed is "USB Controller", driver is usb-uhci
* PCI: device 1106 3104 1043 80ed is "USB Controller", driver is ehci-hcd
* have to insmod usb-storage
* needs usb-storage
* 	succeeded usb-storage
* have to insmod sbp2
* needs sbp2
* 	succeeded sbp2
* looking for ide media
* IDE/0: hda is a SAMSUNG CD-R/RW DRIVE SW-252F
* IDE/0: hdc is a PIONEER DVD-RW DVR-107D
* looking for scsi media
* SCSI/1: sda is a ATA Maxtor 6Y160M0
* SCSI/1: sdb is a ATA Maxtor 6Y160M0
* looking for Compaq Smart Array media
* looking for DAC960
* exiting bootsplash
* opening /proc/splash failed
* guessing type of /dev/sda1
* guessing type of /dev/sda2
* guessing type of /dev/sda5
* guessing type of /dev/sda6
* guessing type of /dev/sda7
* exiting bootsplash
* opening /proc/splash failed
* mounting /dev/sda7 on /sysroot/tmp/hdimage as type ext2
* exiting bootsplash
* opening /proc/splash failed
* unsetting automatic
* exiting bootsplash
* opening /proc/splash failed
* exiting bootsplash
* opening /proc/splash failed
* unsetting automatic
* exiting bootsplash
* opening /proc/splash failed
* exiting bootsplash
* opening /proc/splash failed
* unsetting automatic
* exiting bootsplash
* opening /proc/splash failed
* exiting bootsplash
* opening /proc/splash failed
* unsetting automatic
* exiting bootsplash
* opening /proc/splash failed
* exiting bootsplash
* opening /proc/splash failed
* unsetting automatic
* exiting bootsplash
* opening /proc/splash failed
* exiting bootsplash
* opening /proc/splash failed
* unsetting automatic
* exiting bootsplash
* opening /proc/splash failed
* exiting bootsplash
* opening /proc/splash failed
* "/sysroot/tmp/hdimage/./marc/University/Mandriva" exists and is a directory, looking for iso files
* no ISO image found in "/sysroot/tmp/hdimage/./marc/University/Mandriva" directory
* assuming hdimage/./marc/University/Mandriva is a mirror tree
* unsetting automatic
* exiting bootsplash
* opening /proc/splash failed
* exiting bootsplash
* opening /proc/splash failed
* "/sysroot/tmp/hdimage/./marc/University/Mandriva/devel/cooker/x86_64" exists and is a directory, looking for iso files
* no ISO image found in "/sysroot/tmp/hdimage/./marc/University/Mandriva/devel/cooker/x86_64" directory
* assuming hdimage/./marc/University/Mandriva/devel/cooker/x86_64 is a mirror tree
* Total Memory: 1024 Mbytes
* mount_clp_may_preload: /sysroot/tmp/image/install/stage2//mdkinst.clp into /sysroot/tmp/stage2 (preload = 1)
* opening /proc/splash failed
* have to insmod loop
* needs loop
* 	succeeded loop
* /dev/loop0 is available
* have to insmod cryptoloop
* needs cryptoloop
* 	succeeded cryptoloop
* have to insmod zlib_inflate
* needs zlib_inflate
* 	succeeded zlib_inflate
* have to insmod gzloop
* needs gzloop
* 	succeeded gzloop
* mounting /dev/loop0 on /sysroot/tmp/stage2 as type iso9660
* have to insmod isofs
* needs isofs
* 	succeeded isofs
* lomount succeeded for /sysroot/tmp/mdkinst.clp on /sysroot/tmp/stage2
* found the Mandrakelinux Installation, good news!
* third party: using modules location /sysroot/tmp/image
* creating symlink /tmp/stage2/sbin -> /sysroot/sbin
* creating symlink /tmp/stage2/bin -> /sysroot/bin
* creating symlink /proc/mounts -> /sysroot/etc/mtab
* creating symlink /tmp/stage2/etc/protocols -> /sysroot/etc/protocols
* creating symlink /tmp/stage2/etc/services -> /sysroot/etc/services
* creating symlink /tmp/stage2/etc/group -> /sysroot/etc/group
* creating symlink /tmp/stage2/etc/passwd -> /sysroot/etc/passwd
* creating symlink /tmp/stage2/etc/termcap -> /sysroot/etc/termcap
* creating symlink /tmp/stage2/lib -> /sysroot/lib
* creating symlink /tmp/stage2/usr -> /sysroot/usr
* creating symlink /tmp -> /sysroot/var/run
* creating symlink /tmp/stage2/lib64 -> /sysroot/lib64
* creating device /sysroot/dev/console c 5 1
* creating device /sysroot/dev/tty c 5 0
* creating device /sysroot/dev/ttyS0 c 4 64
* creating device /sysroot/dev/null c 1 3
* creating device /sysroot/dev/mem c 1 1
* creating device /sysroot/dev/tty0 c 4 0
* creating device /sysroot/dev/tty1 c 4 1
* creating device /sysroot/dev/tty2 c 4 2
* creating device /sysroot/dev/tty3 c 4 3
* creating device /sysroot/dev/tty4 c 4 4
* creating device /sysroot/dev/tty5 c 4 5
* creating device /sysroot/dev/tty6 c 4 6
* creating device /sysroot/dev/tty7 c 4 7
* creating device /sysroot/dev/tty8 c 4 8
* creating device /sysroot/dev/fb0 c 29 0
* creating device /sysroot/dev/loop3 b 7 3
* creating device /sysroot/dev/ram3 b 1 3
* creating device /sysroot/dev/fd0 b 2 0
* creating device /sysroot/dev/ram b 1 1
* copy_file: /tmp/syslog -> /sysroot/tmp/syslog
* copy_file: /etc/resolv.conf -> /sysroot/etc/resolv.conf
* /etc/resolv.conf: No such file or directory
* copy_file: /modules/modules.dep -> /sysroot/modules/modules.dep
* copy_file: /sysroot/tmp/stage2/etc/init -> /sysroot/etc/init
* pivot_rooting
* stage1: disconnecting life support systems

] kernel/system logger ok
<4>Bootdata ok (command line is BOOT_IMAGE=all-install ro root=103 ramdisk_size=700000)
<4>Linux version 2.6.11-7mdkBOOT ([email protected]) (gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-7mdk)) #1 Mon Apr 18 08:57:03 EDT 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
<4> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
<4> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
<4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<7>ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000fa8b0
<7>ACPI: XSDT (v001 A M I  OEMXSDT  0x08000403 MSFT 0x00000097) @ 0x000000003ff30100
<7>ACPI: FADT (v003 A M I  OEMFACP  0x08000403 MSFT 0x00000097) @ 0x000000003ff30290
<7>ACPI: MADT (v001 A M I  OEMAPIC  0x08000403 MSFT 0x00000097) @ 0x000000003ff30390
<7>ACPI: OEMB (v001 A M I  OEMBIOS  0x08000403 MSFT 0x00000097) @ 0x000000003ff40040
<7>ACPI: DSDT (v001  A0058 A0058002 0x00000002 MSFT 0x0100000d) @ 0x0000000000000000
<7>On node 0 totalpages: 261936
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 257840 pages, LIFO batch:16
<7>  HighMem zone: 0 pages, LIFO batch:1
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>Processor #0 15:12 APIC version 16
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Setting APIC routing to flat
<6>Using ACPI (MADT) for SMP configuration information
<4>Checking aperture...
<4>CPU 0: aperture @ f8000000 size 64 MB
<4>Built 1 zonelists
<4>Initializing CPU#0
<4>Kernel command line: BOOT_IMAGE=all-install ro root=103 ramdisk_size=700000 console=tty0
<4>PID hash table entries: 4096 (order: 12, 131072 bytes)
<6>time.c: Using 1.193182 MHz PIT timer.
<6>time.c: Detected 2002.655 MHz processor.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Memory: 1023248k/1047744k available (1460k kernel code, 23788k reserved, 461k data, 136k init)
<7>Calibrating delay loop... 3932.16 BogoMIPS (lpj=1966080)
<4>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<4>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
<6>ACPI: Looking for DSDT in initrd... not found.
<6>Using local APIC NMI watchdog using perfctr0
<6>Using local APIC timer interrupts.
<6>Detected 12.516 MHz APIC timer.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050211
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Via IRQ fixup
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<6>PCI: Using ACPI for IRQ routing
<6>** PCI interrupts are no longer routed automatically.  If this
<6>** causes a device to stop working, it is probably because the
<6>** driver failed to call pci_enable_device().  As a temporary
<6>** workaround, the "pci=routeirq" argument restores the old
<6>** behavior.  If this argument makes the device work again,
<6>** please email the output of "lspci" to [email protected]
<6>** so I can fix the driver.
<6>agpgart: Detected AGP bridge 0
<6>agpgart: Maximum main memory to use for agp memory: 941M
<6>agpgart: AGP aperture is 64M @ 0xf8000000
<6>PCI-DMA: Disabling IOMMU.
<4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 3072k, total 16384k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=9
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>Real Time Clock Driver v1.12
<6>Linux agpgart interface v0.100 (c) Dave Jones
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<4>RAMDISK driver initialized: 16 RAM disks of 700000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
<6>ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
<6>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
<6>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<4>hdc: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 8192 buckets, 64Kbytes
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>NET: Registered protocol family 1
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<5>RAMDISK: Compressed image found at block 0
<4>EXT2-fs warning: checktime reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<7>ieee1394: Initialized config rom entry `ip1394'
<6>ohci1394: $Rev: 1223 $ Ben Collins <[email protected]>
<6>ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 177
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177]  MMIO=[fd700000-fd7007ff]  Max Packet=[2048]
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>USB Universal Host Controller Interface driver v2.2
<6>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: irq 185, io base 0xb400
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: irq 185, io base 0xb800
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: irq 185, io base 0xc000
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
<6>uhci_hcd 0000:00:10.3: UHCI Host Controller
<6>uhci_hcd 0000:00:10.3: irq 185, io base 0xc400
<6>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
<6>ehci_hcd 0000:00:10.4: EHCI Host Controller
<6>ehci_hcd 0000:00:10.4: irq 185, pci mem 0xfdf00000
<6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
<6>ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 8 ports detected
<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000a56c5d]
<6>usb 2-1: new full speed USB device using uhci_hcd and address 2
<6>hub 2-1:1.0: USB hub found
<6>hub 2-1:1.0: 4 ports detected
<6>usb 2-2: new full speed USB device using uhci_hcd and address 3
<6>hub 2-2:1.0: USB hub found
<6>hub 2-2:1.0: 4 ports detected
<6>usb 2-2.1: new low speed USB device using uhci_hcd and address 4
<6>usb 2-2.2: new low speed USB device using uhci_hcd and address 5
<6>input: OCT Inc. Cruiser KVM-4(AD) OCT Cruiser KVM-4 AD V1.20 on usb-0000:00:10.1-2.1
<6>usbcore: registered new driver usbkbd
<6>drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
<5>SCSI subsystem initialized
<7>libata version 1.10 loaded.
<7>sata_via version 1.1
<6>ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
<6>sata_via(0000:00:0f.0): routed to hard irq line 4
<6>ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 169
<6>ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 169
<7>ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f
<6>ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
<6>ata1: dev 0 configured for UDMA/133
<6>scsi0 : sata_via
<7>ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f
<6>ata2: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
<6>ata2: dev 0 configured for UDMA/133
<6>scsi1 : sata_via
<5>  Vendor: ATA       Model: Maxtor 6Y160M0    Rev: YAR5
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<5>SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
<5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<5>  Vendor: ATA       Model: Maxtor 6Y160M0    Rev: YAR5
<5>  Type:   Direct-Access                      ANSI SCSI revision: 05
<5>SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
<5>SCSI device sdb: drive cache: write back
<5>SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
<5>SCSI device sdb: drive cache: write back
<6> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
<5>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>sbp2: $Rev: 1219 $ Ben Collins <[email protected]>
<4>EXT2-fs warning (device sda7): ext2_fill_super: mounting ext3 filesystem as ext2
<4>
<6>loop: loaded (max 256 devices)
<6>gzloop: loaded
<6>/sysroot/tmp/mdkinst.clp: 1198 blocks, 65536 bytes/block, largest block is 65562 bytes.
<7>ISO 9660 Extensions: RRIP_1991A
] kernel/system logger ok
<4>Freeing unused kernel memory: 136k freed
<6>NET: Registered protocol family 17
<6>input: USB HID v1.10 Mouse [OCT Inc. Cruiser KVM-4(AD) OCT Cruiser KVM-4 AD V1.20] on usb-0000:00:10.1-2.1
<6>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-2.2
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
<6>hda: ATAPI 8X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
<3>device-mapper: dm-mirror: Device lookup failure
<4>device-mapper: error adding target to table
<6>usb 2-1.3: new full speed USB device using uhci_hcd and address 6
<6>usb 2-1.3: not running at top speed; connect to a high speed hub
<6>scsi2 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 6
<7>usb-storage: waiting for device to settle before scanning
<5>  Vendor: LEXAR     Model: JUMPDRIVE ELITE   Rev: 1000
<5>  Type:   Direct-Access                      ANSI SCSI revision: 00
<5>SCSI device sdc: 1010784 512-byte hdwr sectors (518 MB)
<5>sdc: Write Protect is off
<7>sdc: Mode Sense: 43 00 00 00
<3>sdc: assuming drive cache: write through
<5>SCSI device sdc: 1010784 512-byte hdwr sectors (518 MB)
<5>sdc: Write Protect is off
<7>sdc: Mode Sense: 43 00 00 00
<3>sdc: assuming drive cache: write through
<6> sdc: sdc1
<5>Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 0
<7>usb-storage: device scan complete
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<3>FAT: invalid media value (0xb9)
<6>VFS: Can't find a valid FAT filesystem on dev sdc.
<3>FAT: invalid media value (0xb9)
<6>VFS: Can't find a valid FAT filesystem on dev sdc.