SiI3114 SATA RAID0

Hi.
My Hardware:
Abit MAX3 ( ICH5R + SiI3114 ), 4 x 160GB Seagate SATA, 1x 120GB ATA Maxtor
Configuration on SATA:
all HD's are connected to SiI3114.
1x160GB - Share(FAT32)
1x160GB - Games(NTFS)
1x320GB(RAID0, created with bios) - Share2(NTFS)

on the ATA HD I've installed Mandrake 10 and Windows.

My Problem:

I've tested Windows on SATA Raid0 array and as you can quess its really fas=
t!
So I'm trying to get linux installed on SATA Raid0 too.
My wish:
2 SATA RAID0 Arrays 320GB,
on first:
WinXP partition, Linux=20
on second:
Win Games, share stuff (NTFS or FAT)

Is it possible???
If no, can you imagine something different that would be as fast?

So far:
Got Kernel 2.6.6 from kernel.org.=20
configured the sata_sil as buildin.

fdisk:
Platte /dev/sda: 160.0 GByte, 160041885696 Byte
255 K=F6pfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten =3D Zylinder von 16065 * 512 =3D 8225280 Bytes

Ger=E4t Boot Start End Blocks Id System
/dev/sda1 1 19456 156280288+ c W95 FAT32 (LBA)
***********
HD for sharing stuff mounts ok for linux
***********
Platte /dev/sdb: 160.0 GByte, 160041885696 Byte
255 K=F6pfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten =3D Zylinder von 16065 * 512 =3D 8225280 Bytes

Ger=E4t Boot Start End Blocks Id System
/dev/sdb1 1 19457 156288321 7 HPFS/NTFS

*********
HD seems OK, but if I try mounting I get error:
mount: Falscher Dateisystemtyp, ung=FCltige Optionen, der
=BBSuperblock=AB von /dev/sdb1 ist besch=E4digt oder es sind
zu viele Dateisysteme eingeh=E4ngt
*********

Platte /dev/sdc: 160.0 GByte, 160041885696 Byte
255 K=F6pfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten =3D Zylinder von 16065 * 512 =3D 8225280 Bytes

Ger=E4t Boot Start End Blocks Id System
/dev/sdc1 * 1 38914 312576673+ 7 HPFS/NTFS

************
It seems it is the RAID Array ( size is 320GB!)
But the capacity is 160GB (??)
STRANGE!
************
Platte /dev/sdd: 160.0 GByte, 160041885696 Byte
255 K=F6pfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten =3D Zylinder von 16065 * 512 =3D 8225280 Bytes

Ger=E4t Boot Start End Blocks Id System

****************
HD4, as second in the array, seems to be empty!
BAD, isnt it?
****************=20

and here my fstab:
*****************************************************************
/dev/hda3 / ext3 defaults 1 1
none /dev/pts devpts mode=3D0620 0 0
/dev/hda4 /home ext3 defaults 1 2
/dev/scd0 /mnt/cdrom auto=20
umask=3D0,user,codepage=3D850,iocharset=3Diso8859-15,noauto,ro,exec 0 0
/dev/sda1 /mnt/share1 vfat umask=3D0,user,codepage=3D850 0 0
/dev/sdb1 /mnt/share ntfs default 0 0
/dev/sdc1 /mnt/share3 ntfs default 0 0
/dev/hda1 /mnt/windows ntfs umask=3D0,user 0 0
none /proc proc defaults 0 0
/dev/hda2 swap swap defaults 0 0
*********************************************************************=20

Thats is from dmesg:
*********************************************
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D=
xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y120L0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=3D65535/16/63, UDMA=
(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hda: task_no_data_intr: status=3D0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=3D0x04 { DriveStatusError }
hda: Write Cache FAILED Flushing!
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=3D/dev/hdX a=
s=20
device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PIONEER Model: DVD-RW DVR-106D Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
libata version 1.02 loaded.
sata_sil version 0.54
ata1: SATA max UDMA/100 cmd 0xF9803080 ctl 0xF980308A bmdma 0xF9803000 irq =
19
ata2: SATA max UDMA/100 cmd 0xF98030C0 ctl 0xF98030CA bmdma 0xF9803008 irq =
19
ata3: SATA max UDMA/100 cmd 0xF9803280 ctl 0xF980328A bmdma 0xF9803200 irq =
19
ata4: SATA max UDMA/100 cmd 0xF98032C0 ctl 0xF98032CA bmdma 0xF9803208 irq =
19
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003=20
88:007f
ata1: dev 0 ATA, max UDMA/133, 312581808 sectors (lba48)
ata1: dev 0 configured for UDMA/100
scsi1 : sata_sil
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003=20
88:007f
ata2: dev 0 ATA, max UDMA/133, 312581808 sectors (lba48)
ata2: dev 0 configured for UDMA/100
scsi2 : sata_sil
ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003=20
88:007f
ata3: dev 0 ATA, max UDMA/133, 312581808 sectors (lba48)
ata3: dev 0 configured for UDMA/100
scsi3 : sata_sil
ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003=20
88:007f
ata4: dev 0 ATA, max UDMA/133, 312581808 sectors (lba48)
ata4: dev 0 configured for UDMA/100
scsi4 : sata_sil
Vendor: ATA Model: ST3160023AS Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3160023AS Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3160023AS Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3160023AS Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host2/bus0/target0/lun0: p1
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host3/bus0/target0/lun0: p1
Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write through
/dev/scsi/host4/bus0/target0/lun0: unknown partition table
Attached scsi disk sdd at scsi4, channel 0, id 0, lun 0
*******************************************************************=20

Thanks for help!

Sebastian