Stream HP Colorado mit MDK 10

Hallo,

habe ein Problem mit meinem Streamer. Er mag noch nicht unter MDK 10.0 lauf=
en.

Zur=FCckspulen von B=E4ndern funktioniert
mt -f /dev/st0 rewind

bei einem=20
dump -f /dev/st0 <irgendeine Datei>
bleibt er aber stehen.

Danke schonmal. Bin =FCber jeden Hinweis froh.

Gru=DF
Joachim


[root@localhost jbader]# dump -f /dev/st0 tmp/bak/mytestfile
  DUMP: Date of this level 0 dump: Mon Jul 26 20:49:15 2004
  DUMP: Dumping /dev/ide/host0/bus0/target0/lun0/part6 (/home=20
(dir /jbader/tmp/bak/mytestfile)) to /dev/st0
  DUMP: Excluding inode 8 (journal inode) from dump
  DUMP: Excluding inode 7 (resize inode) from dump
  DUMP: Label: none
  DUMP: Writing 10 Kilobyte records
  DUMP: mapping (Pass I) [regular files]
  DUMP: mapping (Pass II) [directories]
  DUMP: estimated 2277 blocks.
  DUMP: Volume 1 started with block 1 at: Mon Jul 26 20:49:15 2004
  DUMP: write error 20 blocks into volume 1: Input/output error
  DUMP: Do you want to rewrite this volume?: ("yes" or "no") yes
  DUMP: Closing this volume.  Prepare to restart with new media;
  DUMP: this dump volume will be rewritten.
  DUMP: Closing /dev/st0
(kommt nie mehr zur=FCck)

Ausz=FCge aus dmesg:
Kernel command line: BOOT_IMAGE=3Dtape ro root=3D301 devfs=3Dmount acpi=3Dh=
t=20
resume=3D/dev
/hda5 hdd=3Dide-scsi
ide_setup: hdd=3Dide-scsi
...
hdd: HP COLORADO 8GB, ATAPI TAPE drive
...
SCSI subsystem initialized
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HP        Model: COLORADO 8GB      Rev: 2.05
  Type:   Sequential-Access                  ANSI SCSI revision: 02
...
Kernel command line: BOOT_IMAGE=3Dtape ro root=3D301 devfs=3Dmount acpi=3Dh=
t=20
resume=3D/dev
/hda5 hdd=3Dide-scsi
ide_setup: hdd=3Dide-scsi
...
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 1
st0: Block limits 4096 - 0 bytes.
st0: Error with sense data: Info fld=3D0x2800, Deferred st0: sense key Vend=
or=20
Spec
ific
ASC=3D 3 ASCQ=3D c
st0: Error with sense data: Info fld=3D0x2800, Deferred st0: sense key Vend=
or=20
Spec
ific
ASC=3D 3 ASCQ=3D c
st0: Error with sense data: Info fld=3D0x2800, Deferred st0: sense key Vend=
or=20
Spec
ific
ASC=3D 3 ASCQ=3D c
lines 180-199/199 (END)