Re: AVM Fritz unter Mandrake 10.0

Michael Sch=FCtt wrote:

> Kelsang Tsenle wrote:
>
>> Hallo,
>>
>> ich habe eine AVM Fritz Karte gekauft und in eine Mandrake 10.0 Box=20
>> eingebaut. Hat fast alles funktioniert, aber wenn ich isdn4linux=20
>> starte bekomme ich die Fehlermeldung:
>>
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>> [root@linux root]# /etc/init.d/isdn4linux start
>> Starting ISDN for Linux...
>> Loading driver for Fritz! PCI v2.0 ...
>> Configuring kernel for dynamic ip re-routing
>> Starting iprofd ...
>> /dev/isdninfo: No such file or directory
>> Can't open /dev/isdninfo or /dev/isdn/isdninfo: No such file or=20
>> directory
>>
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>>
>> Was mache ich falsch?
>>
>>
> Es werden von MDK nicht alle ben=F6tigten devices angelegt. Schau auf=20
> http://mandrakeuser.de unter scripte nach einem Script von Steffen=20
> (suche: Steffen isdn)
>
> Gru=DF
>
> Michael
>
>
Danke f=FCr den Tipp. Aber irgendwie stelle ich mich zu bl=F6d an mit dem=
=20
Anlegen der Devices.
Ich habe das Skript rauskopiert, als devices.sh abgespeichert und als=20
root ausgef=FChrt.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
mkdir -p /dev/isdn
# ippp, ttyI cui devices
i=3D0
for ((i ; i < 32; i++)); do
    majorippp=3D$((128+$i))
    mknod /dev/isdn/ippp$i c 45 $majorippp ; ln -s /dev/isdn/ippp$i=20
/dev/ippp$i
    mknod /dev/isdn/ttyI$i c 43 $i ; ln -s /dev/isdn/ttyI$i /dev/ttyI$i
    mknod /dev/isdn/cui$i c 44 $i ; ln -s /dev/isdn/cui$i /dev/cui$i
done
<snip/>
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

Das Ergebnis war

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
'/devices.sh: line 4: syntax error near unexpected token `do
'/devices.sh: line 4: `for ((i ; i < 32; i++)); do
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

Um sicherzugehen, dass das Skript mit der richtigen Shell ausgef=FChrt=20
wird, habe ich nachgesehen, welche Shell Mandrake sonst verwendet und hab=
e

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
#! /bin/sh
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

vor die erste Zeile gesetzt, was mir folgende Fehlermeldung eingebracht h=
at:

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
: bad interpreter: No such file or directory
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D


Irgendwie stehe ich gerade total auf dem Schlauch.
Any idea?


Tsenle