Re: CDRW Problem
Dirk <[email protected]> Sat, 14 May 2005 19:31:30 +0200
| Newsgroups | gmane.linux.mandrake.newbie.german |
|---|---|
| Message-ID | <[email protected]> |
Jürgen Kowalzik wrote: > Hallo! > > Klingt so nach M10.1 > > > -- > Jürgen Kowalzik <[email protected] <mailto:[email protected]>> > Hi, war mal 10.1 jetzt Limited 2005. Hab' noch mal cdrecord de- und wieder installiert, jetzt läuft das Löschen scheinbar sauber durch, nur das brennen klappt nicht: Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Performing OPC... cdrecord: Input/output error. read track info: scsi sendcmd: no error CDB: 52 01 00 00 00 FF 00 00 1C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.007s timeout 240s cdrecord: Cannot get next writable address for 'invisible' track. cdrecord: This means that we are checking recorded media. cdrecord: This media cannot be written in streaming mode anymore. cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first. cdrecord: Cannot get next writable address. Writing time: 0.147s Average write speed 999.0x. Fixating... Fixating time: 0.007s cdrecord: fifo had 64 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. da steht "try to blank the media first" ist die nu doch nicht gelöscht? Oder vielleicht der Rohling in Ar...? Zumindest steht da nix mehr von Hardware error. Gruss Dirk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com